Used Mixer Liquid Equipment
14 Mixer Liquid machines IN-STOCK!

More Photos: 4

250 gallon, stainless steel, single wall mixer. Rectangle chamber dimmensions of: 34" in Length; 34" in Width; 45" in Depth, Equipped with 28" long x 28" wide top product port flip up cover capable (needs cover) and (1) 1-1/2" OD threaded top inlet port for inner spray system. Cone bottom with 6 hole / 3 wing impeller and a 5-3/4" OD x 3" ID flanged side bottom discharge with (6) 1/2" bolt holes on 2-1/2" centers and 34" floor clearence. 15 Hp side bottom mounted motor drive and is mounted on four leg stainless steel tubular base frame.

OAD: 60" L x 50" W x 56" H

More Photos: 1

Drop in tank, high shear, emulsifier, mixer with stainless steel contact parts. Equipped with 11" outside diameter bolt on motor mount plate with 24" long shaft and 4" outside diameter and 2- 1/2" inside diameter (4) blade high shear mixing head. Top mounted 1.5 hp motor drive with 3490 rpm.

OAD: 13" L x 11" W x 39" H

More Photos: 2

Low speed, carbon steel, disperser rated at 400 feet per minute with a maximum rpm of 196. Equipped with a 2-1/2" diameter shaft and 30"propeller diameter and hydraulic lift package. Mechanical Variable speed controls with start/stop, E-stop and 9 different RPM settings .

OAD: 72"L x 32"W x 88"H

More Photos: 2

Reversible high shear mixer rated to 1730 gpm. All S/S contact parts, 45" L x 1 3/4" diameter shaft with a 6" rotor stator head. Equipped with air over hydraulic lift to raise and lower mixer. Capable of handing up to a 44' diameter vessel.
Hitachi J300 IGBT Inverter, RPM display and 30 Hp drive.

OAD: 85" L x 53"W x 80"H

More Photos: 1

Heavy duty, 300 gallon, 304 S/S, jacketed liquefier. Equipped with an 18" diameter top hinged man way, 2-1/2" diameter sanitary top product inlet, full jacket rated to 75psi, 1-1/2" jacket inlet / outlet and a 2-1/2" diameter sanitary bottom product discharge.

OAD: 51"L x 51"W x 88"H

More Photos: 2

10 cu ft 304 S/S ribbon blender for batter mixing. With a 40" Long x 22" Wide x 24-1/2" Deep chamber. Equipped with hinged cover with 12" & 6" ports, 1/4" ribbon on a 2" shaft, 1-3/4" center bottom discharge at 24" discharge height and a Waukesha model 16DO discharge pump. Unit mounted on a stainless steel frame.

OAD: 60" (L) x 30" (W) x 64" (H)

More Photos: 2

High speed disperser, hydraulic driven with stainless steel (49" long) shaft with 12'' diameter saw tooth mixing blade. Speed range to 1800 rpm. Shaft lift of 48''.
Rquire separate power pack.

OAD: 7'L x 2'W x 7'H

More Photos: 3

High-speed dual action dispersion mixer with a 36'' hydraulic lift. Has a stainless steel shaft and 10'' saw tooth disperser blade with a rpm range of 0-2290. Also has an attached 50 gallon stainless steel dimple jacketed tank rated at 15psi with a 3'' center bottom discharge, low-speed bi-directional sweep/scrape agitator set at 0-100rpm's. Tank is set to tilt in 15 degree increments to a total of 120 degrees. Has multiple product ports and re-circulating powder pump as well as a dust collection port. Equipped with a 20hp motor with a 21 gpm pump. Motor mounted on base with 85 gallon re-circulating oil reservoir and all necessary valves.

OAD 7'L x 6'W x 7'H

More Photos: 1

Serfilco direct drive homogenizing head mixer. Equipped with 2" diameter by 39" long stainless steel shaft with side-top threaded port for introducing product. Shaft encases rotor shaft down to point of dispersion. Mounted on Crown 1500 pound capacity electric lift for easy insertion into mixing vessel.

OAD: 24" L x 38" W x 68" H

More Photos: 4
Play Video

Lock Metal Detector Head Only

More Photos: 2

Automatic, in-line, stainless steel wrap labeler rated up to 2200" or 300 pieces per min depending on materials and application. Label size range:1/2" to 16"in Length; 1/2" to 6-7/8" in Width. Accuracy: +/- 1/32". Equipped with Versaline LC container handling system, 120" Long x 4-1/2" Wide product conveyor with a 18" Long x 4" Wide wrap station. Model Q65 label head, with stepper drive. Features: M2 microprocessor controller with display, "flash" memory with setup to 50 labels preset, and mounted on stainless steel base. Roll capacity 16" OD on 3" core with label web width up to 7"

OAD" 120" L x 87" W x 60" H

More Photos: 2
Play Video

500 gallon, double motion, scraped surface kettle. All S/S with 316 S/S contact parts. Jacketed rated to MAWP 90 psi @ 332 degree F, and MDMT -20' F @ 90 psi, 3" sanitary discharge, S/S pipe legs , S/S hinged cover. Discharge with 22" floor clearance. National Board #6013.

OAD =: 64" diameter x 96" high

More Photos: 3
Play Video

174" Long by 12" wide friction belt conveyor. Adjustable height from 24" to 40"

OAD: 176"(L) x 20"(W) x 27"(H).

More Photos: 1
Play Video

Horizontal, S/S dual shaft paddle mixer with a working capacity of 0.7 cu ft (20 liters) ideal for test batches and small production runs. Complete with clamp down cover, optional dual "pin bars" to break up agglomerates, bomb bay bottom discharge, discharge collection pan and locking casters. Spray system option can be added to unit for addition of liquid to the mix.
OAD = 42" w x 37" L x 50"