Used Aerosol Equipment
11 Aerosol machines IN-STOCK!

More Photos: 4

TeeMark S-200, semi-automatic, vertical, single chamber, areosol can crusher, cans per minute - depends on size and operator dexterity. Equipped with 8" Long x 6-1/2" Wide x 13" High hand load crushing chamber with up to 12,000 lbs of crushing down force, flip open door, (2) pneumatic control handles and a 12" OD / 11" ID center bottom discharge port for 5 gallon pail. Top mounted 26" long single hydraulic ram arm, with 9 second cycle time and centrifugal blower package, has push button start / stop crusher and blower controls.
Process: Operator insets can into chamber closes door and pulls (2) pneumatic control handles to start the process and able to handle different size cans with wide range of contents. Separates liquid content from the propellants and VOC'S, removes and captures 99% of the contents and blower pulls fumes from in and around the crushing chamber.

OAD: 31" L x 29" W x 88" H

More Photos: 4

Fleetwood 8 Lane, 504" L (42') x 36" W 8 lane magnetic water bath, lane sizes 3" W x 10" H and an infeed height of 36" which feeds into a dual blower dryer discharging onto a single lane accumulation tabletop conveyor 84"L x 7-1/2"W discharging at 36". Controls include on/off, recriprocating pump and E-stop.

OAD: 620"L x 80"W x 96"H

More Photos: 4

Ambec 8 Lane, 504"L (42') x 36"W 8 lane magnetic water bath equipped with lane sizes of 3"W x 10"H and an infeed height of 36" which feeds into a dual blower dryer discharging onto a single lane accumulation tabletop conveyor 84"L x 7-1/2"W discharging at 36". Controls include on/off, reciprocating pump and E-stop.

OAD: 620"L x 80"W x 96"H

More Photos: 3

PMC RI-1200, 12 head rotary aerosol valve inserter, incline feeder, and dual disc feed system capable of speeds up to 240 per minute - depending on application. Unit has a maximum container size range of up to 4-3/4"W and 12"H. Equipped with a 12"W x 120"L magnetic incline feeder with a 6 ft³ product hopper and 4"H guide rails, dual rotary disc cap sorters with dual feed chutes, and a 12 head aerosol valve inserter with a 3"W x 52"L delrin infeed conveyor, worm screw to star wheel infeed and discharge, 1"dia cap indexer and inserter, and enclosed noise proof chamber. Painted aluminum construction with height adjustable legs.

OAD: Inline Feeder 72"L x 40"W x 156"H
OAD: Dual Disc Feed Hopper 76"L x 84"W x 104"H
OAD: Aerosol Valve Inserter 80"L x 42"W x 86"H

More Photos: 1

JG, semi automatic, dual post crimping unit with single cycle crimping. Capable of up to 15 closures@minute. Currently set for a 20mm cap closure. Air operated with start / stop push buttons on each side to cycle.

OAD: 34" L x 34" W x 62" H

More Photos: 2

Kartridge Pak RPD18, Automatic, 18 hd rotary, 316 S/S, piston filler capable of speeds up to 450 cpm depending size container and fill. Has fill size range from 5cc - 1000cc with accuracies of .5cc and can handle container up to 32oz. 30" OD turn table, has 18 fill stations with 4" L x 5" W rising container platforms, 3 3/4" ID open design air operated product pistons, with 1/4" OD cut-off nozzles have 2" dia tri-clover fittings, worm screw to a star wheel infeed, and discharge, no container / no fill bottom up fill, capable of handling various type liquid fills, free-flowing, or viscous up to 15,000 centipoise warm or cold, has a Tri-clover product pump into holding basin with a 2 1/2" OD intake and a temperature gauge, and is mounted, S/S base frame with S/S, bolt down saftey guarding.

OAD: 84" L x 70" W x 96" H

More Photos: 1

JG, Semi automatic double post crimping unit with single cycle crimping. Capable of 40 to 50 closures a minute, from 2 1/2" to 20 1/2" in height. Currently fitted with (2) 20mm 20 segment collets. Pneumatic powered, 31" tall S/S work surface. Plexiglas shields and a two hand safety switch.

OAD: 60" H x 36" W x 20" L

Kartridg Pak Model 124-42-12 a fully automatic 12 head rotary open can product filler capable of speeds of 25 cpm per head or 300 cans per minute. Has a fill range of: 4 - 550cc with Changeparts, Currently set up with 250cc fill heads. Container size range of (with proper change parts): HEIGHT 2.38" - 12.25" (61mm - 311mm) x DIAMETER 1.375" x 3.00" (35mm - 76mm). No can no fill. (OAD: 60"L x 54"W x 84"H).

Anderson, Fully automatic 8 head rotary tipper capable of speeds up to 160 tips per minute. Last used in cosmetic operation running tips for 13, 15, 18 & 20 mm actuators - one set included with machine. Has worm screw to star wheel container handling.

OAD: 8' L x 7' W x 6' 4" H

Capem Vc-4-15 Four Head Rotary Valve Crimper Is Set For An Aerosol Can 2 11/16" Diameter. Has A Worm Screw To Star Wheel Infeed And Star Wheel Discharge. Valve Would Be Preset In Container Before Being Conveyed To Crimper. Conveyor Is 8' From Centerline Of Butt Joint On Discharge End. 3 1/4" Delron Chain. Will Run Approx. 120 Containers Per Minute. 1" Diameter Crimp.

More Photos: 2

Kartridge Pak Model RPG18, automatic, 18 head rotary, 316 stainless steel, piston filler rated from 150 to 450 containers per minute - depending on materials and application. Fill range from 5cc to 950cc, with accuracies of .5cc and can handle various type liquid fills, warm or cold from free flowing to viscous up to 15,000 centipoise and containers to 32oz. Equipped with 30" OD turn table, 18 fill stations, on 4" centers, with 4" long x 5" wide rising container pedestals, 3-5/8" ID open design, air operated product cylinders with auto level controls, 1/2" OD cut-off nozzles and 2" OD tri-clover fittings,104" long x 3-1/4" wide container conveyor, worm screw to a star wheel infeed and discharge, no container / no fill, bottom up fill and mounted on stainless steel frame.

OAD: 104" L x 70"W x 97" H