Bag Inserter Case Erector Equipment
Bliss Case Erector Equipment
Glue Case Erector Equipment
No Sealing Head Case Erector Equipment
Partition Inserter Case Erector Equipment
Tape Case Erector Equipment

Call us to discuss your Case Erector project with an experienced Frain Group engineer.

We're waiting to hear how we can help you choose the right Case Erector equipment today!

A case erector is designed to erect a case from a flat case blank. This first step in the casing operation erects the cases and positions them on the...

A case erector is designed to erect a case from a flat case blank. This first step in the casing operation erects the cases and positions them on the caser for loading. A case erector is a machine designed to erect a case from flat folded, pre-scored, case blank made from corrugated containerboard or other material. A case erector takes one case blank from a magazine and forms or erects the case through the uses of mechanical devices, pneumatic devices, or a combination of both depending on the design of the machine. Case erectors can be designed to seal the bottom of the case using either tape or glue, or not to seal the bottom of the case at all. Cases can be erected with either the case opening facing up or the case opening facing to the side. Special case erectors can be designed to erect bliss boxes, insert partitions into a box or case, or to erect a case and insert a bag into the case for a bag-in-box application (see Bag-in-box). Bliss boxes are created with a solid piece of containerboard that is formed to create the front, back, and bottom of the box. A bliss box case erector then inserts two additional pieces of containerboard to form the sides of the case. The two addition pieces are seal to flaps on the main portion of the case using hot melt glue.