Cutter Slicer Machines

Used Cutter Slicer Equipment

Commercial cutter and slicer equipment is designed to cut, slice, dice, chop, process, peel, and strip cut various different products such as cheeses, meat, vegetables, fruits, breads, pastes. Cutter and slicer equipment covers a number of different types of machines that can be used in the size reduction of a variety of food products. The proper cutter and slicer for the application is based on the product that is to be cut, sliced, or processed, the type of cut, slice, or process needed for the application, and the volume of product that needs to be processed in a given amount of time. Commercial utter and slicer equipment utilize a variety of rotating, spinning, cross-cuting, shredding, and other types of blades and knives to properly process the product.

Contact Us

Related Categories

Cutter Slicer Equipment In Stock

Urschel Laboratories Inc Cutter, Slicer Chopper/Processor SPRINT

  • Manufacturer: Urschel
  • Model Number: SPRINT
  • Frain Number: R39050

Urschel, Model Diversacut Sprint, Stainless steel, dicer, slicer, strip cutter with inclined feeder used for a variety of food products with number of pounds of product per hour – depending on materials and application. Equipped with 16" x 17" product hopper with 61" high in feed, swing open locking access door with safety interrupt switch, crosscut and circular knifes that accept product up to 6½" in any dimension and 10" x 20" discharge chute with 15½" floor clearence. Control panel has start, stop and e-stop push button controls. Mounted on stainless steel (4) leg frame with locking casters.

OAD: 55"L x 55"W x 65"H

Get a Free Quote Call: 630-629-9900

Urschel Laboratories Inc Cutter, Slicer Chopper/Processor RAA

  • Manufacturer: Urschel
  • Model Number: RAA
  • Frain Number: R19232

Urschel Model RAA, USDA approved dicer speeds vary depending on type of product used. Unit is capable of slicing 8000 Lbs/Hr of Pineapple at high speeds and 5000 Lbs/Hr of Macadamia nuts at high intermediate speeds. Unit will cut pieces as small as 1/16" x 1/8" x 1/16" and as large as 3/8" x 1/2" x 3/4". To cut different size pieces change parts are needed. Capable of cutting raw, cooked, or tempered frozen beef1/8, 5/32, 3/16, 1/4, 5/16 or 3/8" (3.2, 4.0, 4.8, 6.4, 7.9, or 9.5 mm) cubes and strips, and pieces such as 1/8 x 3/8 x 3/8" (3.2 x 9.5 x 9.5 mm) or 1/4 x 1/4 x 1/2" (6.4 x 6.4 x 13 mm).
Unit is all stainless steel USDA approved. Change parts required to accommodate size range.

Get a Free Quote Call: 630-629-9900

Urschel Laboratories Inc Cutter, Slicer Chopper/Processor AFFINITY

  • Manufacturer: Urschel
  • Model Number: AFFINITY
  • Frain Number: R38951

Urschel, Model Affinity, Stainless steel dicer, has the ability to process high-fat, coldtemperature, and otherwise normally difficult products, with the amount of product per hour – depending on materials, application and machine configuration. Slice thickness 1/8 – 3/4" (3.2 – 19.1 mm), crosscut 1/8 – 2" (3.2 – 50.8 mm) and circular knife spindles 1/8 – 3" (3.2 – 76.2 mm) for a full range of dices, crumbles / granulations. Equipped with a 10½" x 14" x 17" deep infeed hopper that accepts products up to 7" (178 mm), built-in feed assists in feeding and orientation of product with 25 HP drive and 12" x 13" discharge chute with 24" ground clearance. Control panel has push button start / stop and variable speed dial. Mounted on stainless steel frame with casters.

OAD: 68"L x 60"W x 69"H

Get a Free Quote Call: 630-629-9900

Urschel Laboratories Inc Cutter, Slicer Chopper/Processor AFFINITY

  • Manufacturer: Urschel
  • Model Number: AFFINITY
  • Frain Number: R38950

Urschel, Model Affinity, Stainless steel dicer, has the ability to process high-fat, coldtemperature, and otherwise normally difficult products, with the amount of product per hour – depending on materials, application and machine configuration. Slice thickness 1/8 – 3/4" (3.2 – 19.1 mm), crosscut 1/8 – 2" (3.2 – 50.8 mm) and circular knife spindles 1/8 – 3" (3.2 – 76.2 mm) for a full range of dices, crumbles / granulations. Equipped with a 10½" x 14" x 17" deep infeed hopper that accepts products up to 7" (178 mm), built-in feed assists in feeding and orientation of product with 25 HP drive and 12" x 13" discharge chute with 24" ground clearance. Control panel has push button start / stop and variable speed dial. Mounted on stainless steel frame with casters.

OAD: 68"L x 60"W x 69"H

Get a Free Quote Call: 630-629-9900

Urschel M Dicer, Shredder and Strip Cutter

  • Manufacturer: Urschel
  • Model Number: M
  • Frain Number: 5J2621

Urschel, Model M, stainless steel, belt fed, dicer, shredder and strip cutter. Capable of production rates from 500 to 4,500 Ibs per hour – depending on materials and application. Capable of strip cuts from 3/16″ to 3″ and cross cuts from 1/8″ to 4″. Equipped with 29″ x 9 1/2″ …

Get a Free Quote Call: 630-629-9900

Urschel Laboratories Inc Cutter, Slicer Chopper/Processor M

  • Manufacturer: Urschel
  • Model Number: M
  • Frain Number: 5J2621

Urschel, Model M, stainless steel, belt fed, dicer, shredder and strip cutter. Capable of production rates from 500 to 4,500 lbs per hour – depending on materials and application. Capable of strip cuts from 3/16" to 3" and cross cuts from 1/8" to 4". Equipped with 29" x 9½" load area on feed belt and 11½" x 16" discharge chute with 16" ground clearance. Control panel with start and stop push buttons controls. Mounted on (4) leg stainless steel frame with casters.
Change parts are needed to accommodate size range changes.

OAD: 106"L x 43"W x 55"H

Get a Free Quote Call: 630-629-9900

Urschel Laboratories Inc Cutter, Slicer Chopper/Processor 1700

  • Manufacturer: Urschel
  • Model Number: 1700
  • Frain Number: R31280

Urschel, Model 1700 Comitrol, stainless steel, reduction mill for free flowing dry and semi-dry product with number of pounds of product per hour – depending on materials and application. Equipped with 12" ID x 16" Deep double cone product hopper with 5"diameter feed throat, 6" diameter x 3" deep milling chamber with (4) 2½" dog leg style high-speed rotating impeller and cutting head with vertical blades, 20" diameter product discharge with 25" floor clearance. Powered by a 15 Hp motor drive. Control panel has push botton start / stop controls. Mounted on stainless steel base frame with casters. Operations include communiting, granulating, milling, slicing, liquifying, dispersing, and pureeing. Change parts required per application.

OAD: 45"L x 36"W x 28"H

Get a Free Quote Call: 630-629-9900

Vanmark Cutter, Slicer Peeler 2745

  • Manufacturer: Vanmark
  • Model Number: 2745
  • Frain Number: 5D9637

Vanmark Model 2745, Heavy duty, brush style peeler / scrubber / washer.with amount of product per hour – depending on materials and application. Stainless steel construction. Equipped with (8) 70" long x 4-1/2" diameter rollers (2) rubber pin and (6) bristle scrub brush, (5) dual paddle tumbling system (8" x 4" paddles), swing away discharge and has a automatic lubrication system and Hydraulic drive powered by 20 Hp motor. Mounted on (4) leg base frame.

OAD: 126" L x 36" W x 66" H

Get a Free Quote Call: 630-629-9900

Cutter, Slicer Peeler S-36

  • Model Number: S-36
  • Frain Number: 5D3912

Custom Engineering & Fabrication Co, Model S-36, stainless steel brush peeler. Equipped with a stainless steel inclined belt with 2" high cleats feeding into a 20" x 16" product charge, 16" diameter x 18" long auger moves product into 70" long peeler chamber with (8) rotary brushes, 20" OD single ribbon agitation and top mounted spray nozzels. Product discharges onto a 23" wide chute with 50" ground clearance. Bottom 15" x 8" flanged discharge drains liquid into a Moyno positive diplacement pump powered by a 3 hp drive with a 2½" NPT discharge. Peeler powered by a 7½ hp hydraulic power pack.

OAD: 102"L x 40"W x 80"H (Peeler)
93"L x 48"W x 110"H (Feeder)

Get a Free Quote Call: 630-629-9900

Urschel Laboratories Inc Cutter, Slicer Chopper/Processor RA

  • Manufacturer: Urschel
  • Model Number: RA
  • Frain Number: 5D3561

Urschel Model RA, stainless steel dicer and slicer for a variety of food products with volumes per hour -depending on materials, application and machine configuration. Size range: 1/16" to 3/8" Slicing Knife; 1/8" to 1" Circular Knife; 0.05" to 3" Crosscut Knife. Accepts products up to 3-1/2" in any dimension. Equipped with feed hopper, discharge chute and lift off safety guarding. Able to "strip cut" with removal of crosscut knife. Mounted on (4) leg frame. Change parts required per application.

OAD: 48" L x 48" W x 60" H

Get a Free Quote Call: 630-629-9900

Cutter, Slicer Slicer CARROT SLICER Carrot slicer with three 12" blades capable of slicing in 4" segments

  • Model Number: CARROT SLICER
  • Frain Number: 5D5463

Multi slicer w/ three 12" blades slicing product in segments. Features a 54" L x 10" W cradle conveyor w/ 13 cradles measuring 10" W x 5" L and cradle backstop. Equipped w/ a 7 1/2 hp blade motor, 1/2 hp conveyor motor, two Seco variable drives and replacement blades. Last cutting carrots into 4" segments.

OAD: 68" L x 34" W x 74" H

Get a Free Quote Call: 630-629-9900

Grote Cutter, Slicer Slicer SA2522

  • Manufacturer: Grote
  • Model Number: SA2522
  • Frain Number: 5D1734

Two head stainlesss steel, 120 strokes per minute per head. Nominal 5-1/2" stroke and 22"w slicing zone. Most boneless / non-frozen meat, fish, poultry, cheeses, bread products, fruits, and vegetables can be sliced. Has an all S/S motor for driving accuband, cutting band saw, hydraullically driven cutting action. Last used in USDA food operation slicing ham and cheese for chicken kiev.

OAD: 65"H x 60"W x 60"L

Get a Free Quote Call: 630-629-9900
1 2 3 8