See us at the PMCA Show in Lancaster, PA on 4/15
Home » Kettle
Frain Industries carries hundreds of used hemispherical bottom kettles in many different sizes depending on your application. Frain stocks kettles ranging from 2.5 gallons to 2000 gallons in many different configurations including: agitator, steam kettles or water jacket, scrape surface, tilt discharge, and many others. Additionally kettles can be made of multiple grades of stainless steel (typically 304 or 316/316L) with different levels of corrosion resistance.
Types of agitation available include: single-motion, double-motion, triple-motion, high sheer, horizontal blenders, prop, anchor, and many others.
The Frain Industries engineering team can place you into a kettle solution for your application. If you are looking for a single kettle or an integrated solution with automated fill and discharge options Frain has the equipment for your needs.
Frain Industries carried used tanks from many OEM’s including APV, APV Crepaco, Cleveland, Coppola, Dover, Groen, Hamilton, Hubbert, JC Pardo, Lee, Savage, Walker, and many others.
Lee, Model 20LD12T, 20 liter (5.28 gallon) 316 stainless steel jacketed kettle. Vessel Dimensions: 16¾" ID x 15" deep. Equipped with a tilt out bridge mounted triple motion agitator. Scrape powered by a 5 Hp drive, cross bar powered by a 2 Hp drive, high shear agitator powered by a 3 hp drive, flush mounted sensor and 2" OD / 1½"ID tri-clamp style discharge with ball valve and 36" ground clearance.
Jacket Fittings: ¾" NPT
MAWP: 90 PSI @ 332° F (jacket)MDMT: -20°F @ 90 PSI (jacket)
MAWP: 15/FV PSI @ 250° F (vessel)MDMT: -20°F @ 15/FV PSI (vessel)
OAD: 93"L x 43"W x 120"H
Lee, model 100CHD9MSI, 100 gallon, 316 stainless steel, slanted double motion scrape surface agitation, half jacketed tilting kettle. Vessel dimensions: 36" diameter x 36" deep with 20" straight wall, 60" feeding height and 2½" OD/2" ID bottom tri-clamp discharge port with 18" ground clearance. Equipped with bridge mounted scrape surface agitation and lift off cover. Mounted on (4) leg base frame.
National Board: 10190
Jacket Access: (2) 1½" NPT
MAWP: 100 PSI @ 338°FMDMT: -20°F @ 100 PSI
OAD: 91"L x 60"W x 82"H
Lee, Model 60DA, 60 gallon capacity, 316 stainless steel, jacketed double motion kettle. Vessel dimensions: 30" diameter x 24" deep with 14" straight wall. Equipped with bridge mounted scrape agitator powered by a 2 HP drive, center agitation powered by a 1 HP drive and 3½" OD / 3" ID Tri-Clamp style bottom discharge with pneumatic flush mount valve and 36" ground clearance. Mounted on (4) leg frame.
Jacket Ports: (4) 1¼" NPT
Nat’l Brd: 11873MAWP: 100 PSI @ 338°FMDMT: -20°F @ 100 PSI
OAD: 40"L x 36"W x 100"H
Lee, Model 300D9MS 300 gallon capacity, 316 stainless steel, jacketed double motion kettle. Vessel dimensions: 54" diameter x 40" deep with 20" straight wall. Equipped with lift up covers, 5 Hp bridge mounted scrape agitator, flush mounted sensor and 3½" OD / 3" ID Tri-Clamp style bottom discharge with ball valve and 16" ground clearance. Mounted on (3) leg frame.
Jacket Ports: (2) 1½" NPT
Nat’l Brd: 14823MAWP: 90 PSI @ 332°FMDMT: -20°F @ 90 PSI
OAD: 74"L x 59"W x 79"H
APV 200 gallon, 316 stainless steel, jacketed triple motion kettle with a MAWP rating of 75psi @350F & jacket MDMT of -20F @75psi, (1) 7.5hp side bottom sweep agitation & (1) 10hp center turbine agitator (discharging via screw auger) into Moyno inline positive displacement pump, (1) APV scrap surface heat exchanger rated with a vessel MAWP of 150psi @ 400F & vessel MDMT of -20F @ 150psi to control product temperature. Allen Bradley 1336+ variable speed controls for all components included in system. Additional feature include mass flow meter. Skid package with all utility connections.
OAD: 112"L x 72"H x 125"H
Heritage Equipment / BCast, 300 gallon capacity, 316 stainless steel, jacketed double motion kettle. Vessel dimensions: 54" diameter x 40" deep with 20" straight wall. Equipped with lift up covers, safety grate, 5 Hp and 3 Hp bridge mounted double motion scrape agitator, flush mounted sensor, CIP spray balls supplied by 2"OD / 1½" ID Tri-Clamp fittings and 3½" OD / 3" ID Tri-Clamp style bottom discharge with ball valve and 14" ground clearance. Mounted on (4) leg frame.
Jacket Ports: (2) 2" NPT
Nat’l Brd: 2500MAWP: 75 PSI @ 320°FMDMT: -4°F @ 75 PSI
OAD: 66"L x 60"W x 99"H
30 Gallon, 316 stainless steel, steam jacketed mixing kettle. Vessel dimensions: 16" inside diameter x 24" in depth product bowl, with top side mounted prop air mixer, jacket rated at MAWP of 90 psi @ 330°F, 1" OD threaded jacket ports and tilting discharge. Mounted on "A" frame base.
OAD: 48" L x 29" W x 53" H
Chester Jensen, 350 gallon capacity, 304 stainless steel kettle. Vessel dimensions: 72" diameter x 28" deep with a cone style bottom and 15" straightwall. Equipped with lift up covers and interrior baffle. 5 Hp bridge mounted scrape agitator. Unit mounted on (4) legs with a 2½" OD / 2" ID Tri-clamp style bottom discharge with butterfly valve and 28" ground clearance.
Top Ports:(1) 5" diameter open vent(2) 2"OD / 1½"ID Seated Bevel(1) 3"OD / 2½"ID Seated Bevel
Jacket Ports:(2) 2" NPT
National Board: 109MAWP: 94 PSI @ 300°F (water)MAWP: 50 PSI @ 300°F (steam)
OAD: 80"L x 75"W x 92"H
Hamilton, Model SA, 500 gallon, stainless steel, double motion, scrape surface, 1/2 jacketed kettle with pounds of product per hour – depending on materials and application. Vessel dimensions: 64" ID x 52" in Depth. Equipped with bridge mounted scrape surface tilt out agitation, thermowell, 3½"OD / 3"ID center bottom discharge has ball valve and 34" floor clearence.
Nat’l Brd: 5233MAWP: 90 PSI @ 320°F
Jacket Access: (3) 1½" NPT
OAD: 100" L x 70" W x 145" H
60 gallon, stainless steel, jacketed kettle. 31" diameter x 24" deep bowl, bridge mounted, flat bar shaped, sweep agitator, with flip top covers. Jacket, rated to 40psi @ 300°F, with (2) 1-1/2" jacket in/outlets. 3" center bottom discharge at 9" floor clearence. Mounted on (3) hip socket mild steel legs, with (2) 1-1/2" in/outlets National Board #28218.
OAD: 46" L x 46" W x 62" H
Sign up for our newsletter to receive the latest in packaging tips, case studies and more.