See us at the PMCA Show in Lancaster, PA on 4/15
Home » Labeler
Frain has hundreds of labelers in stock ranging in price from $2,000 to $139,000. Depending on your product, speed and container, Frain engineering can select the best labeling machine for your application.Labels come pre cut and on rolls and can be applied in many different ways. There are spot labelers, wrap-around labels, roll-through labelers, hot and cold glue labelers, pressure sensitive labelers, heat sensitive labelers, hot melt glue labelers, sleeve labelers, heat shrink labelers, and many more.Labeler considerations are the purpose of the label, the size, shape and surface of the container, the materials, heat resistance type of adhesives, etc.
Tronics, Model S30, stainless steel, open frame, stepper driven, pressure sensitive, wrap labeler rated from 100" to 1,200" of labels per minute with number of containers – depending on materials and application. Label size range up to: 8¾" in Height x 29" in length with accuracies up to + / – 1/32nd of label placement. Equipped with 4½" wide x 116" long plastic Delrin product conveyor and has 32" in feed and discharge height, with pneumatic gate indexing and adjustable guide rails, no container / no label, single label head with 9½" high peeler plate and 5" high x 18" long wrap belt, 3-sided container trap and wrap, 12" OD label reel on 3" OD core and is hand crank adjustable. Control panel has touch pad controls with read out and up to 100 job memory with start and e-stop push buttons. Mounted on stainless steel frame with casters and leveling legs.
OAD: 120" L x 54" W x 56" H
Tronics Model S30, stainless steel, open frame, stepper driven, pressure sensitive, wrap labeler rated from 100" to 1,200" of labels per minute – depending on materials and application. Label size range up to: 10" in Height x 29" in length with accuracies up to + / – 1/32nd of label placement and containers from 5ml vials to 10 gallon containers both with proper change parts. Equipped with 4" wide x 120" long plastic Delrin product conveyor with 32" in feed / discharge height, spacing wheel indexing, adjustable guide rails, no container / no label, single label head with 9-1/2" high peeler plate and 6" high side" 21" long x wrap belt, 13" OD label reel on 1-1/2" OD core and is hand crank adjustable. Control panel has touch pad controls with read out and has up to 100 job memory with e-stop. Mounted on stainless steel frame with casters and leveling legs.
Tronics Model 3S3, stainless steel, right hand, front, back and wrap, pressure sensitive labeler rated from 100" to 1,200" on front and back labels and 50" to 600" on wrap labels per minute with number of product – depending on materials and application. Label size range: 1" to 8-1/2" in Height; 12" in length and can handle containers up to 8" in diameter. Equipped with 120" long x 7-1/2" wide plastic Delrin product in feed conveyor with adjustable guide rails, 60" long x 1" wide top hold down conveyor, spacing wheel, aligning chains for container squaring, dual label heads with 9" high peeler plates and 16" long x 6" high side wrap conveyor all hand crank adjustableControl panel has touch pad controls with read out and e-stop. Mounted on stainless steel base frame with casters and leveling legs.
OAD: 120" L x 72" W x 72" H
Nita, Model XP100, stainless steel, wrap around pressure sensitive labeler rated from 100" to 1570" on wrap labels per minute with number of containers – depending on materials and application. Label size range: 1" to 9" in Height. Equipped with 116" long x 4" wide plastic Delrin product in feed conveyor with adjustable guide rails, aligning belts for container squaring, label head with 10" high peeler plate and 16" long x 6" high side wrap conveyor all hand crank adjustable. Control panel has touch screen HMI. Mounted on stainless steel base frame with casters and leveling legs.
OAD: 142"L x 60"W x 73"H
Axon Model EZ-300 and EZ-48, Automatic, tamper evident shrink neck bander or sleeve label applicator with shrink tunnel with number of sleeves or neck bands per minute – depending on materials and application. Layflat: 80 mm to 300 mm. Maximum container Diameter: 7.36". Film thickness: 40 to 70 microns. Equipped with vertical and horizontal perforation, knife film cut off, registration, and PLC Controller with touch pad controls with HMI display. Mounted a height adjustable stainless steel frame. Film specifications: up to 15" diameter roll on 3" core. Axon Model EZ-48, Stainless steel over conveyor, convection air, neck band shrink tunnel. Total Aperture: 10" in Height; 10" in Width. Tunnel: 48" in Length. Temperature range: up to 130° F. Equipped with recirculating blower, digital temperature controller and system mounted on height adjustable frame with locking casters. System mounted above 6" wide x 176" long stainless steel tabel top belt conveyor with spacing wheel and variable speed control.
OAD: 180"L x 55"W x 86"H
PDC inline, stainless steel, left to right, continuous motion, neck bander / sleever with shrink tunnel. PDC Model 75E neck bander / sleever. Band size range: 3.5" OD x 6" high. Sleeve size range: 3.5" OD x 9" high. Equipped with 144" long x 3-1/4" wide conveyor 36" in feed and discharge height, 24" indexing screw, dual powered stepper motor film feed, film tensioner, material jam, low material, film out sensors, splice table with splice detector sensor film registration and vertical perforator. A/B PLC, touchscreen, Powerflex VFD controllers and interlocking safety guarding.Change parts required to accommodate size range.
PDC, Model KRC184654, stainless steel hot air shrink tunnel. Equipped with 4-1/4" wide x 5" high x 46" long heat shrink chamber. A/B controller with single top mounted blower motor, temperature controller and E-stop. Mounted on KAL-200 auto-lift height adjustable stand.
Speed dependent on material, application and machine configuration.
OAD: 32" L x 24" W x 75" H Applicator 47" L x 37" W x 80" H Guarding
OAD: 44" L x 30" W x 62" H Shrink Tunnel 74" L x 38" W x 74" H Guarding
Tronics Model S30, stainless steel, open frame, stepper motor, pressure sensitive, wrap labeler rated from 100" to 1,200" of labels per minute – depending on materials and application. Label size range up to: 10" in Height x 29" in length with accuracies up to + / – 1/32nd of label placement and containers from 5ml vials to 10 gallon containers both with proper change parts. Equipped with 4" wide x 120" long plastic Delrin product in feed conveyor with 32" in feed / discharge height, spacing wheel indexing, adjustable guide rails, no container / no label, single label head with 9-1/2" high peeler plate and 6" high side" 21" long x wrap belt, 13" OD label reel on 1-1/2" OD core and is hand crank adjustable. Control panel has touch pad controls with read out and has up to 100 job memory with e-stop. Mounted on stainless steel frame with casters and leveling legs.
Nita, Model XP100, stainless steel, wrap around pressure sensitive labeler rated from 100" to 1570" per minute. Label size range: 1" to 9" in Height. Equipped with 116" long x 4" wide Delrin conveyor, adjustable guide rails, aligning belts for container squaring, label head with 10" high peeler plate and 16" long x 6" high side wrap conveyor. Touch screen HMI. Mounted on stainless steel base frame with leveling legs. Speed dependent on materials, application and machine configuration.
Axon, Model EZ-130 automatic, tamper evident shrink neck bander or sleeve label applicator with Model EZ-48 shrink tunnel. Neck bander equipped with photo eyes for machine activation, film registration, stepper drive film feed system, tamp band pusher, guillotine style cutter with durable and dependable (2) blade cutting system. Layflat: 18mm to 130mm. Container diameter: 10mm to 79mm. Film thickness 40 to 70 microns. Film specs: up to 15" OD roll on 4-7/8" OD core Control panel with touch screen HMI controller with safety door guarding and e-stop. Speed dependent on materials, application and machine configuration.
Shrink tunnel has 12" high x 7½" wide aperture x 48" long chamber, digital heat controls and pneumatic tunnel lift. System mounted above 6" wide x 176" long stainless steel table top belt conveyor with spacing wheel and variable speed control.
OAD: 178"L x 55"W x 83"H
Intersleeve SA2100 automatic, shrink sleeve labeler capable of 80 to 200 containers per minute. Product size range: (1 1/2" – 4 3/4") dia x (2" – 13 1/4")H. Servo driven film feed, film registration, sensor for bottle presence, sleeve head with 16" vertical adjustment, AB PLC, hand crank for sleeve head height adjustment, status indicator lights, fault location board, and barrier guarding with electrical interlock.
OAD: 43"L x 57"W x 90"H
Krones Canmatic fully automatic, 12-head rotary, hot melt glue, wrap around labeler for pre-cut paper labels. Capable of speeds 50 to 240 containers per minute. Equipped with hot melt glue station, no container/no label, vertically and horizontally adjustable label magazine – 9500 label capacity. Additional features include a 130" product conveyor, worm screw and star wheel container transfer, barrier guarding and an AB plc.
OAD: 93"L x 78"W x 72"H
Sign up for our newsletter to receive the latest in packaging tips, case studies and more.