Used Metal Detector Equipment
83 Metal Detector machines IN-STOCK!

More Photos: 4

8" x 8", High sensitivity in a small, easy-to-install package for drop through, Construction Stainless steel 304 straightlined case, ABS plastic control panel, epoxy lined aperture. Protection Ratings IP 69K, NEMA 4X, ATEX zone 22, hazardous location Class II Division 2 Groups F&G. Operating Temperature -10°C to +40°C (+14°F to +104°F) Relative Humidity 20% to 80% noncondensing.
Electrical Supply 85 volts to 260 volts AC single phase plus earth ground; 47 Hz to 65 Hz, 100 watts maximum
Air Supply for AuditCheck option (not available on APEX 100) 5.5 bar (80 psi)
Product Speed 0.5 m/min (1.7 ft/min) to 1000 m/min (3,300 ft/min)
Output Types 6 Relays outputs; Relays: 250 volt AC 2 amp max. 50 volt DC 1 amp max.
Output Applications (software selectable) Reject 1, Reject 2, AuditCheck, Fault, Alarm, Warning, QA lamp
Input Types 6 Inputs - Active 12v DC+12 volt auxiliary supply for input sensors
Input Applications (software selectable) Speed Sensor, Keylock, Product Select 1, Product Select 2, Product Trigger, Reject 1 Confirm, Reject 1 Complete, Reject 2 Confirm, Bin Full, External Suppression and Clear All Warnings/Faults/Alarms

OAD: 36"L x 30"W x 18"H

More Photos: 4

More Photos: 4

More Photos: 4

More Photos: 4

More Photos: 1
Play Video

Safeline, model STD, automatic, conveyor through, metal detector rated up to 100 feet per minute - depending on materials and application. Useable Aperture: 5" in Height; 12" in Width. Sensitivity: up to 1.5mm Ferrous; up to 1.5mm Non Ferrous; up to 2.0mm Stainless steel depending on materials and application. Equipped with a 90" long x 12" wide flex link conveyor belt with 1/2" high lugs on 4.5" centers, retractable belt reject, and a touch pad operator interface. Mounted on casters.

OAD: 90" L x 36" W x 48" H

More Photos: 4
Play Video

Safeline STD, automatic, decline, angled metal detector. Usable Aperture: 4" in Height; 16" in Width. Sensitivity: up to 1.5mm Ferrous, up to 1.5mm Nonferrous; up to 2.0 mm stainless steel depending on materials and application. Equipped 64" long x 16" wide product chute with a 7.5" wide tapered discharge, 4" high guide rails, and a touch pad operator interface. Mounted on casters. 52" High infeed. 18" H discharge.

OAD: 64"L x 36" W x 56"H

More Photos: 4

More Photos: 4

More Photos: 4

More Photos: 4

More Photos: 4

More Photos: 4

More Photos: 4
Play Video

Safeline Model STD head only metal detector. Total Aperure: 16" in Width; 3-3/4" in Height, Useable Aperture: 14" in Width; 3" in Height. Sensitivity ratings: 1.0 mm ferrous; 1.1 mm non-ferrous; 1.5 mm stainless steel - depending on materials and application. Equipped with touchpad controller and visual display.

OAD: 34" L x 12" W x 15" H Metal Detector
9" L x 7" W x 12" H Controller

More Photos: 4
Play Video

Eriez Model EZ TECH DSP 5X20, inline, metal detector. Total Aperture: 5" in Height; 20" in Width. Usable Aperture: 3-1/4" in Height ;15" in width. Equipped with a 69" long by 16" wide neoprene conveyor, 2" high adjustable guide rails, retracting nose reject, touch pad controller with LED display and variable speed controller. Mounted on stainless steel base frame with casters. Sensitivity ratings: 1mm ferrous, 1.2mm non-ferrous and 1.5mm stainless steel dependant on materials, application and operating conditions. Estimated speeds from 3 to 100 feet per minute depending on materials, application and machine configuration.

OAD: 71" L x 39" W x 45" H

More Photos: 4
Play Video

Loma Model IQ2 Max, stainless steel metal detector rated from 20 to 200 feet per minute - depending on materials and application. Useable Aperture: 4-3/4" in Height; 25-1/2" in Width. Sensitivity: up to 1.1mm Ferrous; up to 1.1mm Non Ferrous; up to 2.0mm Stainless Steel depending on materials and application. Equipped with touch pad controller with digital display

OAD: 38" L x 12" W x 13" H Metal Detector Head
14" L x 12" W x 6" H Controller

More Photos: 4

Loma Model IQ2 Max, stainless steel metal detector rated from 20 to 200 feet per minute - depending on materials and application. Useable Aperture: 5-3/4" in Height; 21-1/2" in Width. Sensitivity: up to 1.1mm Ferrous; up to 1.1mm Non-Ferrous; up to 2.0mm Stainless Steel depending on materials and application. Equipped with touch pad controller with LCD display.

More Photos: 4

Loma Model IQ2 Max, 304 stainless steel metal detector rated from 20 to 200 feet per minute - depending on materials and application. Total Aperture: 5" in Height; 41-1/2" in Width. Usable Aperture 4-1/2" in Height: 40" in Width. Sensitivity: up to 1.1mm Ferrous; 1.1mm Non-Ferrous; 2.0mm stainless steel depending on materials and application. Temperature range: -14 to 104 Deg F. Equipped with touch pad controller with LCD display.

OAD: 53" L x 12" W x13" H Detector Head
24" L x 12" W x 8" H Controller

More Photos: 4

Safeline Model PHL-1 stainless steel, gravity feed pharmaceutical metal detection system for tablets and capsules rated from 12,000 to 60,000 tablets per hour - depending on materials and application. sensitivity rating: 1.5mm ferrous, 1.1 for non-ferrous, and 1.2mm stainless steel depending on materials and application. Equipped with 3" Wide x 7/8" High aperture, inline dual side gate reject and touch pad controller with operator interface and LED display. Mounted on a stainless steel frame with casters. Design height and slide angle are adjustable, for compatibility with most tablet presses and de-dusters.

OAD: 24" L x 24" W x 38" H

More Photos: 4
Play Video

Safeline Model PHL-1 stainless steel, gravity feed pharmaceutical metal detection system for tablets and capsules rated from 12,000 to 60,000 tablets per hour - depending on materials and application. sensitivity rating: 1.5mm ferrous, 1.1 for non-ferrous, and 1.2mm stainless steel. Equipped with 3" Wide x 7/8" High aperture, inline dual side gate reject and touch pad controller with operator interface and LED display. Mounted on a stainless steel frame with casters. Design height and slide angle are adjustable, for compatibility with most tablet presses and de-dusters.

OAD: 24" L x 24" W x 38" H

More Photos: 4
Play Video

Safeline Model PHL-1 stainless steel, gravity feed pharmaceutical metal detection system for tablets and capsules rated from 12,000 to 60,000 tablets per hour - depending on materials and application. sensitivity rating: 1.5mm ferrous, 1.1 for non-ferrous, and 1.2mm stainless steel depending on materials and application. Equipped with 3" Wide x 7/8" High aperture, inline dual side gate reject and touch pad controller with operator interface and LED display. Mounted on a stainless steel frame with casters. Design height and slide angle are adjustable, for compatibility with most tablet presses and de-dusters.

OAD: 24" L x 24" W x 38" H

More Photos: 4

Safeline Model PHL-1 stainless steel, gravity feed pharmaceutical metal detection system for tablets and capsules rated from 12,000 to 60,000 tablets per hour - depending on materials and application. sensitivity rating: 1.5mm ferrous, 1.1 for non-ferrous, and 1.2mm stainless steel depending on materials and application. Equipped with 3" Wide x 7/8" High aperture, inline dual side gate reject and touch pad controller with operator interface and LED display. Mounted on a stainless steel frame with casters. Design height and slide angle are adjustable, for compatibility with most tablet presses and de-dusters.

OAD: 24" L x 24" W x 38" H

More Photos: 4

Pulsotronic Model GF120, stainless steel, inline, metal detector, product diverter for free flowing product rated from 5,000 to 25,000 pounds per hour - depending on materials and application. Equipped with 4-3/4" diameter main inline product feed tube with two 4-3/4" diameter channels, one for good product the other is a diverter valve for bad product. Air rating: up to 6 bar, operating temperatures from 0 to 60 Deg Centigrate, all stainless steel housing and contact parts, M-Pulse touch pad controller with readout and sensitivity ratings of 0.7 ferrous and 1.2 stainless steel depending on materials and application.

OAD: 24" L x 14" W x 32" H

More Photos: 4
Play Video

Lock MET 30, automatic, conveyor through, metal detector rated up to 60 feet per minute, number of product - depending on materials and application. Total Aperture: 3-1/2 in Height; 9-1/2 in Width, Usable Aperture: 3" in Height; 9" in Width. Sensitivity: up to 1.2mm Ferrous, up to 1.3mm Non-Ferrous, up to 1.8 mm Stainless Steel. Equipped with 120" long x 8" wide Flex link conveyor, 4" high guide rails, touchpad controller with visual display and programmable controls with 100 product memory capacities and is capable of doing both wet and dry applications.

OAD: 120" L x 38" W x 48" H

More Photos: 4
Play Video

Lock MET 30, automatic, conveyor through, metal detector rated up to 60 feet per minute, number of product - depending on materials, application and machine configuration. Total Aperture: 3-1/2 in Height; 9-1/2 in Width. Usable Aperture: 3" in Height; 9" in Width. Sensitivity: up to 1.2mm Ferrous, up to 1.3mm Non-Ferrous, up to 1.8 mm Stainless Steel. Equipped with 120" long x 8" wide Flex link conveyor, 4" high guide rails, touchpad controller with visual display and programmable controls with 100 product memory capacities.

OAD: 120" L x 38" W x 48" H

More Photos: 4

Safeline metal detector number of product and sencitivites - depending on materials and application. Equipped with Aperture: 3" in Height 21-1/2" in Width total aperature, Currently set for 3/4" in Height 10-1/2" in Width usable Aperature with 60" long 11" wide (3) belt product conveyor, touch pad controller with LED display.

OAD: 60" L x 36" W x 18" H

More Photos: 4

More Photos: 4

Goring Kerr Model Graseby DSP2, inline metal detector with speeds and number of product - depending on materials and application. 5" wide x 12 " high total and 3-1/4" wide x 10-1/2" high working aperature with standard sensitivities of 1.2mm ferrous material, 1.2mm non-ferrous, and 1.5mm stainless steel depending on materials and application. Equipped with 84" long x 3-14" wide product conveyor touch pad operator interface controller with LED display and mounted on 4 leg base frame.

OAD: 84" L x 30" W x 63" H

More Photos: 4

Westinghouse PTD125, two channel, plug type Diverter Valve. Pressure rating: up to 3 bar. Pipe size: 125 mm in diameter. Product temperature: -25° C to 80° C. sencitivites depending on materials and application. Aluminum housing with 316 stainless steel contact parts.

OAD: 40" L x 12" W x 28" H

More Photos: 4

Westinghouse PTD125, two channel, plug type Diverter Valve. Pressure rating: up to 3 bar. Pipe size: 125 mm in diameter. Product temperature: -25° C to 80° C. sencitivites depending on materials and application. Aluminum housing with 316 stainless steel contact parts.

OAD: 40" L x 12" W x 28" H