Used Printer Equipment
30 Printer machines IN-STOCK!

More Photos: 4

Hapamatic 203, Continous, or Intermittent motion, inline web printer rated up to 60 cycles per minute. Has a maximum print area across and parallel to the web 5.6" L x 8.4" W, surfaces, Has independent drive system, inspection door for visual control, magnetic print mat holder, quick changeover mats, and capable of printing on aluminum foils, plastic foils, paper, and more, operation is triggered by signal from thermoforming machine.

OAD: 32" L x 46" W x 28" H

More Photos: 4

Table top, flexographic chip board printer rated up to 130 cycles per minute - depending on materials and application. Chip board size range: 3-1/4 to 12" in Length x 1-5/8" - 14" in Width. Equipped with 15" long x 14" wide x 10" high hand crank adjustable blank chip board magazine, 12" long x 3" diameter print cylinder. : Control box with start / stop buttons, on / off speed switch with speed control dial and counter with readout

OAD: 32" L x 20" W x 20" H

More Photos: 4
Play Video

Automatic, blank corrugate single color printer rated from 20 to 100 cycles per minute - depending on materials and application. Blank size range up to 32" in Length x 24" in Width. Equipped with 40" long x 36" wide x 30" high two chain lugged hand crank adjustable blank magazine. 32" long x 12" diameter top print roller, 32" long x 2-1/2" wide lead roller, 32" long x 4" diameter transfer roller and 32" long x 12" diameter bottom pick-up roller with on / off and start / stop controls.

OAD: 76" L x 53" W x 61" H

More Photos: 1

Intermittent motion, flexo-graphic platen printer capable of speeds up to 55 cycles per minute. Has a maximum print area across and parallel to the web 12" x 10", and capable of printing on tyvek, laminates, as well as foils, and paper, is ideal for printing on thermoforming, pouch, and blister machines.

OAD: 30" L x 36" W x 20" H

More Photos: 2

Automatic, rotoscreen printing system with UV drier and tunnel capable of speeds up to 200 ppm depending on application. has a Apex RS-1100 rotoscreen and a Fusion UV drying system with P300X power source, has a 7" L x 4" W x 20" H cassette magazine a 20" L x 4" W lugged chain feed conveyor to a 6" dia rotary drum has a 3 3/2" x 2 7/8" print area and statinary squeegee, with no product / no print photo eye. cassette is then transfered to UV drying tunnel with a 44" L x 4" W teflon mesh conveyor a 4 7/8" W x 2" H (total apeture), and 4 1/2" W x 1 1/4" H (working apeture) x 20" L tunnel, controller with start / stop counter, speed controls with add ink, and e-stop, and has (4) height adjustable screw leveling legs, and was last running audio casettes at 120ppm.

OAD: 72" L x 24" W x 62" H

More Photos: 2

Automatic, rotoscreen printing system with UV drier and tunnel capable of speeds up to 200 ppm depending on application. Apex RS-1000 wide deluxe rotoscreen printer, and UV drying system, 7 1/2" L x 4" W x 19" H cassette magazine and a 24" L x 6" W lugged chain feed conveyor to a 6" OD rotary drum with 3 1/2" x 3 1/2" print area and stationary squeegee, with no product / no print photo eye, and flip up saftey cover. Cassette is then transfered to UV drying tunnel with a 45" L x 6" W teflon mesh conveyor a 7 1/2" W x 1 1/2" H (total apeture), and 6 1/2" W x 1 1/8" H (working apeture) x 20" L tunnel, with a 13" L x 8" W product discharge chute at end of mesh conveyor, controller with start / stop counter, and speed controls with e-stop, and has (4) legs with casters for mobility, and was last running audio casettes at 120ppm.

OAD: 90" L x 28" W x 68" H

More Photos: 2

Automatic, rotoscreen printing system with UV drier and tunnel capable of speeds up to 200 ppm depending on application. Apex RS-1000 wide deluxe rotoscreen printer, and UV drying system, 7 3/4" L x 4 1/2" W x 21" H cassette magazine and 24" L x 6" W (2) chain lugged feed conveyor to a 6" OD rotary drum has a 3 1/2" x 3 1/2" print area and stationary squeegee, with no product / no print photo eye, and flip up saftey cover. Cassette is then transfered to UV drying tunnel with a 45" L x 6" W teflon mesh conveyor a 7 1/2" W x 1 1/2" H (total apeture), and 6 1/2" W x 1 1/8" H (working apeture) x 20" L tunnel, with a 18" L x 8" W product discharge chute at end of mesh conveyor, controller with start / stop counter, and speed controls with e-stop, and has (4) legs with casters for mobility, and was last running audio casettes at 120ppm.

OAD: 90" L x 28" W x 68" H

More Photos: 1

Continous, or Intermittent motion, inline web printer capable of speeds up to 60 cycles per minute. Has a maximum print area across and parallel to the web 5.6" L x 8.4" W, surfaces, Has independent drive system, inspection door for visual control, magnetic print mat holder, quick changeover mats, and capable of printing on aluminum foils, plastic foils, paper, and more, operation is triggered by signal from thermoforming machine.

OAD: 32" L x 46" W x 28" H

More Photos: 1

Continous, or Intermittent motion, inline web printer capable of speeds up to 60 cycles per minute. Has a maximum print area across and parallel to the web 5.6" L x 8.4" W, surfaces, Has independent drive system, inspection door for visual control, magnetic print mat holder, quick changeover mats, and capable of printing on aluminum foils, plastic foils, paper, and more, operation is triggered by signal from thermoforming machine.

OAD: 32" L x 30" W x 28" H

More Photos: 1

Continous, or Intermittent motion, inline web printer capable of speeds up to 60 cycles per minute. Has a maximum print area across and parallel to the web 5.6" L x 8.4" W, surfaces, Has independent drive system, inspection door for visual control, magnetic print mat holder, quick changeover mats, and capable of printing on aluminum foils, plastic foils, paper, and more, operation is triggered by signal from thermoforming machine.

OAD: 30" L x 36" W x 26" H

More Photos: 1

Intermittent motion, flexo-graphic platen printer capable of speeds up to 55 cycles per minute. Has a maximum print area across and parallel to the web 12" x 10", and capable of printing on tyvek, laminates, as well as foils, and paper, is ideal for printing on thermoforming, pouch, and blister machines.

OAD: 30" L x 36" W x 20" H

More Photos: 1

Intermittent motion, flexo-graphic platen printer capable of speeds up to 55 cycles per minute. Has a maximum print area across and parallel to the web 12" x 10", and capable of printing on tyvek, laminates, as well as foils, and paper, is ideal for printing on thermoforming, pouch, and blister machines.

OAD: 30" L x 36" W x 20" H

More Photos: 1

Intermittent motion, flexo-graphic platen printer capable of speeds up to 55 cycles per minute. Has a maximum print area across and parallel to the web 12" x 10", and capable of printing on tyvek, laminates, as well as foils, and paper, is ideal for printing on thermoforming, pouch, and blister machines.

OAD: 30" L x 36" W x 20" H

More Photos: 1

Intermittent motion, flexo-graphic platen printer capable of speeds up to 55 cycles per minute. Has a maximum print area across and parallel to the web 12" x 10", and capable of printing on tyvek, laminates, as well as foils, and paper, is ideal for printing on thermoforming, pouch, and blister machines.

OAD: 30"L x 36"W x 20"H

More Photos: 1

Portable, continous, flexographic chip board printer rated up to 130 cycles per minute - depending on materials and application. Chip board size range: 3-1/4 to 12" in Length x 1-5/8" - 14" in Width. Equipped with 12" long x 12" wide x 10" high hand crank adjustable blank chip board magazine, 12" long x 3" OD print cylinder with plastic cover, can use rubber or plastic mounts, currently set with rubber mounts and can accomidate characters 12 pt. thickness and up. Features: Control box with start / stop buttons, on / off speed switch with speed control dial, and a Omeron counter with readout. Can be used to print folding cartons, blister cards, inserts, chipboard displays and more and is able to imprint on large or small areas of folding chipboard or sheets, with characters for dates, codes, models, numbers etc.

OAD: 32" L x 22" W x 24" H

More Photos: 1

Intermittent motion, flexo-graphic platen printer capable of speeds up to 55 cycles per minute. Has a maximum print area across and parallel to the web 12"L x 10"W, and capable of printing on tyvek, laminates, as well as foils, and paper, is ideal for printing on thermoforming, pouch, and blister machines.

OAD: 30" L x 36" W x 20" H

Intermittent motion, flexo-graphic platen printer capable of speeds up to 55 cycles per minute. Has a maximum print area across and parallel to the web 12"L x 10"W, and capable of printing on tyvek, laminates, as well as foils, and paper, is ideal for printing on thermoforming, pouch, and blister machines.

OAD: 30"L x 36"W x 20"H

More Photos: 2

Fully automatic blank case / tray printer capable of up to 100 blanks per minute and blank size up to 33.5"L by up to 28". Features 24 1/4" wide print rollers on 11 pitch (11" roll dia) set up to print on four sides. Equipped with a 24" H blank magazine, barrier guarding with electrical interlocks, hand crank blank width adjustment, and a GE 300 line control.

OAD: 78"L x 46"W x 65"H

More Photos: 2

Carton printer set up for mounting with ink jet style coder with vacuum style carton feed capable of speeds up to 60 cpm (depending on size of carton being erected). Carton size range (Length) 22mm to 127mm (7/8" to 5"), (Width) 10mm to 90mm (3/8" to 3 1/2"), (Depth) 6mm to 56mm (1/8" to 12").

OAD: 74" (L) x 24" (W) x 58" (H)

Hapamatic 203 single color printer can be used on intermittent and continuous motion thermoforming machines, and can print on paper,plastic or foil. Unit is also capable of random or registered formats. Max printing area is140 x 210 MM. Max speed is 60 cpm. Inde length is 140 MM. OAD 586MM L X 552MM H X 770MM D

More Photos: 1

Hapamatic 203 single color vertical platen printer capable of speeds up to 60 cpm w/max printing area of 8" L x 5 1/2" W. Printer can be used on intermittent and continuous motion thermoforming machines and can print on paper, plastic or foil. Unit is capable of random or registered formats.

OAD: 23"L x 30" W x 21" H

More Photos: 1

Hapamatic 203 single color printer can be used on intermittent and continuous motion thermoforming machines, and can print on paper,plastic or foil. Unit is also capable of random or registered formats. Max printing area is140 x 210 MM. Max speed is 60 cpm. Inde length is 140 MM. OAD 586MM L X 552MM H X 770MM D

More Photos: 1

High speed offset printer for film, or sugar coated tablets. Has variable outputs up to 1,000,000 tablets per hour (depending on size and shape being run). Capable of running specific size, and shaped tablets for either short, or prolonged production runs. Has a 14" wide print area. Drum style unit has "USDA" approved coatingson all contact parts. Has Woods E-trol ll SCR print roller controller, and is mounted on base with casters for mobility. Last running in a pharmaceutical operation (OAD: 38" W x 43"L x 57" H).

More Photos: 1

High speed offset printer for film, or sugar coated tablets rated up to 750,000 tablets per hour. Able to run specific size and shaped tablets for either short or prolonged production runs, and has a 16" wide print area. Drum style unit has "USDA" approved coatingson all contact parts, with aluminum side frame construction. Last running in a pharmaceutical operation.
OAD: 58"L x 36"W x 77"H

More Photos: 1

High speed offset printer for film, or sugar coated tablets rated up to 750,000 tablets per hour. Able to run specific size and shaped tablets for either short or prolonged production runs, and has a 16" wide print area. Drum style unit has "USDA" approved coatingson all contact parts, with aluminum side frame construction. Last running in a pharmaceutical operation. OAD: 58"L x 36"W x 77"H

More Photos: 2

High speed offset printer for film, or sugar coated tablets rated up to 750,000 tablets per hour. Able to run specific size and shaped tablets for either short or prolonged production runs, and has a 16" wide print area. Drum style unit has "USDA" approved coatingson all contact parts, with aluminum side frame construction. Last running in a pharmaceutical operation.
OAD: 58"L x 36"W x 77"H

More Photos: 1

High speed offset printer for film, or sugar coated tablets rated up to 750,000 tablets per hour. Able to run specific size and shaped tablets for either short or prolonged production runs, and has a 16" wide print area. Drum style unit has "USDA" approved coatingson all contact parts, with aluminum side frame construction. Last running in a pharmaceutical operation.
OAD: 58"L x 36"W x 77"H

More Photos: 1

Tablet printer rated 10,000 to 70,000 tablets per hour - depending on materials and application.
OAD: 58" L x 36" W x 77" H

Hapamatic 203 single color printer can be used on intermittent and continuous motion thermoforming machines, and can print on paper,plastic or foil. Unit is also capable of random or registered formats. Max printing area is140 x 210 MM. Max speed is 60 cpm. Inde length is 140 MM. OAD 586MM L X 552MM H X 770MM D

Hapamatic 203 single color printer can be used on intermittent and continuous motion thermoforming machines, and can print on paper,plastic or foil. Unit is also capable of random or registered formats. Max printing area is140 x 210 MM. Max speed is 60 cpm. Index length is 140 MM. OAD 586MM L X 552MM H X 770MM D