Sealer Bag Machines

Used Sealer Bag Equipment

Sealer bag equipment or bag sealing equipment is designed to seal various kinds of pre-made bags or pouches. Bags can be sealed using impulse heat, hot melt glue, hot air (to re-activate pre-applied glue), thread stitching, or many other bag sealing methods. Depending on the bag sealer machine, the bag may have the opening of the bag folded over prior to sealing. Bag sealers can be designated as semi-automatic or automatic. Semi-automatic bag sealers require the operator to present the bag to the bag sealer in the proper manner and to activate the bag sealing cycle. The operator is responsible for closing the bag, and tucking the bags flaps, if necessary. The operator is also responsible for discharging the bag from the machine. Automatic bag sealers have the bag fed into the bag sealer automatically with a conveyor or by some other method. The bag sealer then automatically closes the bag, automatically tucks the bag flaps if necessary, and automatically seals the bag.

Contact Us

Sealer Bag Equipment In Stock

CVP Systems Sealer Bag Vacuum MKIII 30"

  • Manufacturer: CVP Systems
  • Model Number: MKIII 30"
  • Frain Number: R35261

CVP Model Mark lll, Semi automatic, vacuum / gas flush, configured for M.A.P. (modified atmosphere package) bag sealer with number of bags per minute – depending on materials, application and operator dexterity. All seal head components are constructed of T-303 / 304 stainless steel with an electro-polished finish. Equipped with 30" hot bar sealing system (26" usable seal area) and Cool-Edge seal bar with TeflonĀ® tape, dual snorkels, side mounted Cuno filter, Twin Teflon vacuum / gas flush particle probes with 9-1/4" spacing. Control panel has (4) program PLC Micro-Controller with 2 hand control, vacuum and gas flush control logic, low gas warning system, pneumatically operated adjustable head mount with joystick control and dry vane vacuum pump with throttle valve, gas flush port. Mounted on stainless steel frame with casters.

OAD: 41" L x 40" W x 60" H

Get a Free Quote Call: 630-629-9900

Bandrite Sealer Bag Band 6000

  • Manufacturer: Bandrite
  • Model Number: 6000
  • Frain Number: R38260

Bandrite Model 6000 RTL, Automatic, continuous motion, band style bag sealer rated from 250 to 750 inches per minute with number of bags – depending on materials, application and operator dexterity. Equipped with angled, tilt away sealing head has ¾" wide heat sealing and cooling bars with non-marking carrier belts, adjustable running speeds and temperature controls up to 600°F, bag trim station, 1 line coder and hand crank height adjustable for different size bags. Mounted over 6" wide x 100" long stainless steel conveyor with variable speed controller powered by ¼ Hp drive.

OAD: 108" L x 36" W x 59" H

Get a Free Quote Call: 630-629-9900

CVP Systems Sealer Bag Vacuum MKIII 30"

  • Manufacturer: CVP Systems
  • Model Number: MKIII 30"
  • Frain Number: R35260

CVP Model Mark lll, Semi automatic, vacuum / gas flush, configured for M.A.P. (modified atmosphere package) bag sealer with number of bags per minute – depending on materials, application and operator dexterity. All seal head components are constructed of T-303 / 304 stainless steel with an electro-polished finish. Equipped with 30" hot bar sealing system (26" usable seal area) and Cool-Edge seal bar with TeflonĀ® tape, dual snorkels, side mounted Cuno filter, Twin Teflon vacuum / gas flush particle probes with 9-1/4" spacing. Control panel has (4) program PLC Micro-Controller with 2 hand control, vacuum and gas flush control logic, low gas warning system, pneumatically operated adjustable head mount with joystick control and dry vane vacuum pump with throttle valve, gas flush port. Mounted on stainless steel frame with casters.

OAD: 41" L x 40" W x 60" H

Get a Free Quote Call: 630-629-9900

CVP Systems Sealer Bag Vacuum MKIII 30"

  • Manufacturer: CVP Systems
  • Model Number: MKIII 30"
  • Frain Number: R34531

CVP Model Mark lll, semi automatic vacuum and gas flush modified atmosphere bag sealer configured for M.A.P package with number of bags per minute – depending on materials, application and operator dexterity. All head components are constructed of T-303/304 stainless steel with an electro-polished finish. Equipped with 30" hot bar sealing system (26" usable seal area) and Cool-Edge seal bar with TeflonĀ® tape, with dual snorkels, side mounted Cuno filter, Twin Teflon vacuum / gas flush particle probes with 9-1/4" spacing. Control panel has (4) program PLC Micro-Controller with 2 hand control, vacuum and gas flush control logic, low gas warning system, pneumatically operated adjustable head mount with joystick control and dry vane vacuum pump with throttle valve, gas flush port. Mounted on H style base frame with casters.

OAD: 40" L x 38" W x 62" H

Get a Free Quote Call: 630-629-9900

Bandrite Sealer Bag Band 6000

  • Manufacturer: Bandrite
  • Model Number: 6000
  • Frain Number: R37943

Bandrite Model 6000, Automatic, in line, band style bag sealer rated from 0 to 750 inches per minute with number of bags – depending on materials, application and operator dexterity. Equipped with angled sealing tilt away head has ¾" wide heat sealing and cooling bars with non-marking carrier belts, adjustable running speeds and temperature controls up to 600 Deg F. bag trim station, 1 line coder and hand crank height adjustable for different size bags. Heat and cool down on / off, temperature controller and speed control dial. Mounted over 6" wide x 96" long stainless steel belt conveyor with adjustable guides and powered by ¼ Hp drive.

OAD: 96" L x 36" W x 59" H

Get a Free Quote Call: 630-629-9900

Fischbein Sealer Bag Hot Air PBC6000

  • Manufacturer: Fischbein
  • Model Number: PBC6000
  • Frain Number: R37883

Fischbein, Model PBC 6000, right to left, pre-applied glue, bag heat sealer. Rated from 0 to 85 linear feet per minute with number of bags – depending on materials, application and operator dexterity. Bag size range: 4" to 26" in Width up to 56" Length. Filled bag weight from 1 lbs to 110 lbs, will run most gusseted and flat bags. Equipped with front break away channel, bag guide with folding plow for single fold, electric heater to heat up and activate pre-applied glue, adjustable pressure 12" long dual compression belt section. Control panel has touch pad with heater on / off and motor run, auto, stop switches, bag jam detection, over temperature sensor shut down, with start, stop, e-stop push button controls. Mounted on hand crank height adjustable base frame with casters and 10′ long x 12" wide black PVC product belt conveyor.

OAD: 120" L x 33" W x 60" H

Get a Free Quote Call: 630-629-9900

CVP Systems Sealer Bag Vacuum MKIII 54"

  • Manufacturer: CVP Systems
  • Model Number: MKIII 54"
  • Frain Number: R35910

CVP Model Mark lll, Semi automatic, modified atmosphere, vacuum and gas flush bag sealer configured for M.A.P package with number of bags per minute – depending on materials, application and operator dexterity. All head components are constructed of T-303/304 stainless steel with an electro-polished finish. Equipped with 54" hot bar sealing system (50" usable seal area) has Cool-Edge seal bar and TeflonĀ® tape, with dual snorkels, side mounted Cuno filter, Twin Teflon vacuum / gas flush particle probes. Control panel has (4) program PLC Micro-Controller with 2 hand control, vacuum and gas flush control logic, low gas warning system, pneumatically operated adjustable head mount and dry vane vacuum pump with throttle valve, gas flush port. Mounted on H style base frame with casters.

OAD: 54" L x 40" W x 58" H

Get a Free Quote Call: 630-629-9900

Fischbein Sealer Bag Hot Air PILS330

  • Manufacturer: Fischbein
  • Model Number: PILS330
  • Frain Number: R38150

Fischbein, Model PILS 330, Pinch top inner liner (Cap Sac) continuous bag sealer sequentially seals and perforates inner bag’s liner. Rated up to 75 linear feet per minute with number of bags – depending on materials, application and operator dexterity. PILS-330 sealer separates and seals the inner plastic bag from the top of the outer paper bag and reactivates the bag’s pre-applied hot melt adhesive strip and automatically folds over the top of bag forming the perfect sift-proof bag closure. Seals the bag in (2) stages, effectively creating a bag inside a bag. Equipped with pre-heating station for pre-applied glue with single fold over station, final bag heat sealing and cooling area and is hand crank height adjustable. Control panel has digital temperature display, key pad for variable speed control with machine start / stop button and dual emergency e-stop buttons. Mounted on height adjustable frame with casters to roll over existing conveyor.

OAD: 124" L x 37" W x 60" H

Get a Free Quote Call: 630-629-9900

Automated Packaging Systems Sealer Bag Impulse FAS1000S

Automatic, stainless steel, bagging system for loading and sealing poly bags from rollstock at up to 25 bags per minute. Utilizes preformed polyethylene bags perforated at break, and fan folded in box . Bag size range: 8" – 24" L x 7" – 13" W. Equipped with 15" W seal jaw, open bag detection prior to loading. High integrity seals reduce chance of product loss. Product is loaded thru top mounted funnel , fabricated per apllication. Automated fillers can be mounted or can manual fill. Equipped with imprinter for data coding and NEMA 4X enclosures.

OAD: 68"L x 50"W x 50"H

Get a Free Quote Call: 630-629-9900

Miller Weldmaster Corporation Sealer Bag Hot Air PS150

Miller Weldmaster Corporation, Model PS150, Pre-applied glue / weldable thermal plastic, hot air bag sealer. Rated up to 35 bags per minute – depending on materials, application and operator dexterity. Equipped with front bag guide, folding plow for single fold, maximum temperature up to 1,450 Deg F and has a seal width from 1" to 2.5" with dual compression belt section. Control panel has A/B controller with touch screen HMI, start, stop, reset and e-stop push buttons with statis light bar. Mounted on height adjustable frame with casters, leveling legs and has 10′ long x 12" wide black PVC product belt conveyor.
This poly-woven bag top-closing machine seals any poly-woven, thermoplastic, or paper bags.

OAD: 120" L x 50" W x 75" H

Get a Free Quote Call: 630-629-9900

Fischbein Sealer Bag Hot Air PILS300

  • Manufacturer: Fischbein
  • Model Number: PILS300
  • Frain Number: R37891

Fischbein Model PILS 300, Top pinch, inner liner hot air bag sealer rated up to 75 linear feet per minute with number of bags – depending on materials, application and operator dexterity. Multi-wall paper, pinch bag sealer that have a preapplied hot-melt adhesive strip and heat-sealable polyethylene or foil inner liners, can also be used to seal standard pinch-style bags that do not have inner liners. Equipped with 192" long x 12" wide powered bag belt conveyor, pre-heating station for pre-applied glue with single fold over station, final bag heat sealing and cooling section and hand crank height adjustable. Control panel control panel has digital temperature display, key pad for variable speed control, and dual emergency stop buttons.and machine start / stop button. Breakaway design eliminates costly downtime caused by bag jams while allowing easy cleaning and service of the hot air manifold and bag folder. Mounted on height adjustable frame with casters to roll over existing conveyor.

OAD: 193" L x 46" W x 82" H

Get a Free Quote Call: 630-629-9900

Fischbein Sealer Bag Hot Air PILS300

  • Manufacturer: Fischbein
  • Model Number: PILS300
  • Frain Number: R37890

Fischbein Model PILS 300, Top pinch, inner liner hot air bag sealer rated up to 75 linear feet per minute with number of bags – depending on materials, application and operator dexterity. Multi-wall paper, pinch bag sealer that has a preapplied hot-melt adhesive strip and heat-sealable polyethylene or foil inner liners, can also be used to seal standard pinch-style bags that do not have inner liners. Equipped with 192" long x 12" wide powered bag belt conveyor, pre-heating station for pre-applied glue with single fold over station, final bag heat sealing and cooling section also hand crank height adjustable. Control panel control panel has digital temperature display, key pad for variable speed control, and dual emergency stop buttons.and machine start / stop button. Breakaway design eliminates costly downtime caused by bag jams while allowing easy cleaning and service of the hot air manifold and bag folder. Mounted on height adjustable frame with casters to roll over existing conveyor.

OAD: 193" L x 46" W x 82" H

Get a Free Quote Call: 630-629-9900