Used Sifter Separator Equipment
38 Sifter Separator machines IN-STOCK!

More Photos: 4
Play Video

Sweco Model LS18S333, 18" diameter, single separation vibratory sifter, with volumes per hour - depending on materials and application. Currently equipped with (1) 18" Diameter x 3" High stainless steel base frame section and (1) 18" Diameter x 3" High stainless steel separation frame, needing one screen (change part per application) top section over size, bottom section on, with 9" long x 3-1/2" diameter discharge port with clamp ring assembly, vibratory pedestal base and mounted on 24" long x 18" wide x 18" high (4) leg stand.

OAD: 24" L x 24" W x 49" H

More Photos: 4

Kason Model K440, 40" diameter, single separation vibratory sifter, with volumes per hour - depending on materials and application. Currently equipped with (1) 40" Diameter x 8" High stainless steel base frame section and (1) 40" Diameter x 6" High stainless steel separation frame, needing one screen (change part per application) top section over size and bottom section on size, each has 15" long x 8" diameter discharge ports have clamp ring assembly and mounted on vibratory pedestal base.

OAD: 52"L x 52"W x 36"H

More Photos: 4
Play Video

Pfening 36" 3-Deck, 36" diameter, 3-deck, inline flow through pressure sifter. Screen area: 15.3 ft². Pressure rating: up to 15 psi; at 15 inches Hg maximum vacuum. Chamber dimensions: 36" diameter x 16" straight wall. Equipped with 4" diameter top center product port and top site glass, stainless steel sanitary pressure housing, has (3) stainless steel decks and (2) screens with self cleaning ball system and 4" diameter side bottom discharge.

OAD: 44" L x 44" W x 56" H

More Photos: 4

Rotex R0301 SSSI, 48" Long x 16" Wide, Stainless steel, two deck, single screen, separator rated up to 1,500 products per hour - depending on materials and application. Equipped with a 6" OD inlet, 13" x 10" inlet with plastic cover, 13" x 14" inlet with plastic cover, bolt down stainless steel cover, 22" x 12" separating screen, two 4" OD discharges with 16" of ground clearance, and on 4" OD discharge with 12" of ground clearance. Mounted on a stainless steel frame.

OAD: 54" L x 30" W x 32" H

More Photos: 4
Play Video

Sweco, 30" diameter, two deck, one screen, vibratory sifter rated up to 1000 lbs per hour - depending on materials and application. Equipped with 7" high top deck, 6" high bottom deck and two 6" diameter discharge ports. Mounted on a pedestal style base.

OAD: 32" L x 48" W x 32" H

More Photos: 2

Ajax, 80" Long x 24" Wide sifter/seperator. Equipped with an 8.5" ID inlet, bolt down cover, 24" wide x 4" high over product discharge, and a 10" ID under product discharge.

OAD: 84" L x 30" W x 32" H

More Photos: 3

Gump CP-43, 48" diameter, stainless steel, pneumatic, inline sifter/ screener rated up to 99,000 lbs per hour - depending on materials and application. Operating pressure: 15 psig. Screen area: 33 ft². Equipped with a 6" top center inlet, bolt down cover, pressure release valve, three screens with self cleaning systems, two 5" diameter side bottom discharges. Mounted on a 72" high pedestal style frame.

OAD: 66" L x 66" W x 130" H

More Photos: 2

Pfening 36" Inline, 4-Deck, 36" diameter, pneumatic, inline flow through pressure sifter. Screen area: 15.3 ft². Pressure rating: up to 15 psi; up to 15 in. Hg maximum vacuum. Chamber dimensions: 36" diameter x 16" straight wall. Equipped with two 3" diameter top center ports, 304 stainless steel housing, aluminum decks, and two 3" diameter side bottom discharge.

OAD: 48" L x 48" x 126" H

More Photos: 2
Play Video

Prater RS91B, Continuous, centrifugal, sifter/scalper with 410 in² of effective screen area - outputs dependent on materials and application. Particle size range: 1/4" to 44 microns (325 mesh). Equipped with a 6" I.D / 9" O.D flanged inlet, 4" diameter transfer screw, 20" long x 10 " wide access port, air purge shaft seals, 9" diameter x 24"L screen, 5" I.D / 7-1/2" O.D flanged primary (fine) discharge port, and a 8" I.D / 13-1/2" O.D flanged secondary (coarse) discharge port.

OAD: 56" L x 20" W x 30" H

More Photos: 2
Play Video

Kason K48, 48" dia, dual deck, 316 S/S contact parts, vibrating screen seperator. Unit has a 6"H deck, 1hp drive, and (2) 8" dia discharges. Mounted on a pedestal frame.

OAD: 48"L x 48"W x 40"H

More Photos: 3

LMC Lewis Scalper, High capacity "SCALPER" single pass scalping, re scalping, and aspiration functions for removing of roughage, light fines, Top for feed roll drives one bottom for aspiration drive). Process involves the incoming product passing thru rotating wire mesh scalping reel eliminating roughage and other oversized materials, and re-scalping wheel reclaims all good materials, then aspiration chamber removes the light materials. Last used in for a nut application.

More Photos: 2

LMC Lewis 301, MARQ Series 300, gravity separator rated up to 310 ct ft of product per hour - depending on materials, application and products bulk desity. Ripple deck design provides more traction for better separation and counter balanced construction for vibration free operation. Equipped with top 27" L x 10" W x 18" D conical product feed hopper, mounted on 10" x 10" OD flanged infeed port with (8) 1/4" bolts on 4-1/2" centers, and a top 13" L x 11" W OD flanged vent fan port with (10) 1/4" bolts on 6" centers. 36" L x 29" W ribbed vibratory sifting areas has 6" W x 5" H heavy product discharge chute with 29" floor clearence, and 4" W x 3" H light product discharge chute with 39" floor clearence, top 7-1/2 Hp chain and sproket fan motor drive with saftey guarding and is mounted on heavy duty base frame.

OAD: 68" L x 48" W x 81" H

More Photos: 3

LMC Lewis 2404, 14 sq ft, vibratory, sizing shaker, feed and separation system. Has a 102" L x 24" W x 10" D, single deck vibratory separation conveyor, and bottom screen, with 1/8" dia separation holes, lock down cover, 12" L x 20" W x 12" D product feed hopper with 114" in feed height and 12" L x 8" W product discharge port, with 77" discharge height. Used for uniform small product separation without scalping for sifting. Mounted on a heavy duty base frame has a access platform with ladder, and and a Dayton 15- 5/8" top mounted centrifugal blower.

OAD: 192" L x 60" W x 130" H

More Photos: 2

Sprout Waldron, 2 deck, 3 screen, roto shaker, gyratory screener, 54" wide x 96" long sift area with gyratory - reciprocating screening action with top scalping section,and a 3/4" x 3/4" top screen, and 1/8" x 1/8" bottom screen. Top cover, with quick release clamps, and a 19" ID funnel type product infeed, and (2) 10" diameter top cover access ports. 4" wide x 21" long end bottom and re-circulation discharge ports with 12''of floor clearance, self cleaning ball system and 5 Hp V-Belt drive.

OAD: 168" L x 64" W x 60" H

More Photos: 2

Carter Day DCT4, High capacity "SCALPERATOR" 24" x 28" single pass scalping, re-scalping and aspiration functions for removing of roughage, light fines and other objects scooped up during harvesting. Open circuit type with 24" L x 28" W feed and 3/4" x 3/4" mesh scalping screens. 11" L x 10" W clean product discharge, 12" diameter light lift port and (3) 3/4 Hp motor drives (two top for feed roll drives one bottom for aspiration drive). Process involves the incoming product passing thru rotating wire mesh scalping reel eliminating roughage and other oversized materials and re-scalping wheel reclaims all good materials, then aspiration chamber removes the light materials.

OAD: 9' L x 5' W x 7' 5" W

More Photos: 1
Play Video

Gough Econ, 48" Diameter, vibratory sifter. Equipped with cover with 8" diameter center inlet, 6" diameter top inlet, slope below product screen to funnel product to discharge, 15"L x 8"W discharge port for product through screen, and 22 1/2"H discharge. Mounted on painted steel frame. Current screen has 2mm x 2mm square openings.

OAD; 60"L x 50"W x 49"H

More Photos: 1

Gough Econ, 48" diameter, vibratory sifter. Has cover with 8" diameter center inlet, 6" diameter top inlet, slope below product screent to funnel product to discharge, 15"L x 8"W discharge port for product through screen, and 22 1/2"H discharge. Mounted on painted steel frame. Current screen has 2mm x 2mm square openings.

OAD; 60"L x 50"W x 49"H

More Photos: 1

Gough Econ, 48" diameter, vibratory sifter. Has cover with 8" diameter center inlet, 6" diameter top inlet, slope below product screent to funnel product to discharge, 15"L x 8"W discharge port for product through screen, and 22 1/2"H discharge. Current screen has 2mm x 2mm square openings.

OAD; 60"L x 50"W x 49"H

More Photos: 4
Play Video

Great Western 221, Tru-Balance gyratory motion sifting system built for screening any dry, free- flowing product ranging in size from 1/4" to 400 mesh. The Tru-Balance sifter utilizes gyratory sifting motion for gentle, accurate product separations. Unit operates at 262 rpm with a 2 5/8" circle of gyration. Sifter box has kiln dried maple and birch construction for maximum fatigue strength & durability with minimal weight. Unit has (12) vertically nested 30 7/8" x 30 7/8" 50 mesh sieves for a total of 80 sq. ft. of screening area. Equipped with 7 1/2" ID product inlet and (3) 5 1/2" - 6" ID bottom discharges w/ 18" of floor clearance, and is mounted on a painted steel frame.

OAD: 62"(L) x 42"(W) x 86"(H)

More Photos: 1

Gump CP-43, 48" diameter, stainless steel, pneumatic, in-line sifter / screener. Has a total screen area of 33 square feet, with 6" OD inlet, 6" OD outlet, (3) sieves, and 15 psig operating pressure. Example of feed rates up to 55,000 lbs@hr on out loads of flour thru a 40 mesh stainless steel screen

OAD: 60" L x 60" W x 84" H

More Photos: 3

18" x 36" double deck sifter complete with aluminum screen frame and cover with mild steel body. Currently equipped with top cover clamps and automatic tension for screens. Complete w/two inlets, one 4" diameter and two 10" diameter. Has three 4" diameter outlets. Top and bottom screens Last used in pharmaceutical operation.
OAD: 65"H 44"W 78"L

More Photos: 3

Constructed Of High Density Rigid Polyurethane Sprout-Waldron Multi Deck Sani-Sizer Sifter Can Handle Up To 24 Sq Ft Of Bolting Area Per Stack (6 Decks). Sifter Operates At 275/290 Rpm At A 2" Circle Of Gyration. Product Contact Parts Are Fda Approved Unit Is Complete With (2) Tops, #74, #48, #16, #14 Screens & (7) Separators. Last Used For Preparation Of Pharmaceutical Powders.

More Photos: 3

F.H.Schule H-453-ST, Table, chamber style separator capable of doing up to 7 tons @ hour on rice products. 90 chamber unit designed to remove husk particles from rice. has product infeed, with top 144" L x 70" W separation table that filters down to 15 across 3 high sort chambers each side, one for finished product, the other for the husks.

OAD: 144" L x 70" W x 60" H

More Photos: 4

Buhler-Maig MVSO100, 35 ft³ aspirator, air separator rated up to 210 scfm. Capacity: up to 4,000 lbs per hour - depending on materials and application. Chamber dimensions: 40" in length; 36" in width; 43" in depth. Equipped with a side bolt down access door, 8-1/2" OD / 6" ID flanged product intake port, 12" diameter x 40" long chamber with squirrel cage fan, 6" diameter x 40" long stainless steel product screw, 5" OD husk (bad product) discharge port, and rice (good product) is discharged thru bottom of separator. Primarily used in rice hulling process, after removing the husk from paddy by a hulling machine the aspirator then separates the husk from the rice by clean positive air flow.

OAD: 60" L x 48" W x 72" H

More Photos: 3

Buhler-Maig MVSO100, 35 ft³ aspirator, air separator rated up to 210 scfm. Capacity: up to 4,000 lbs per hour - depending on materials and application. Chamber dimensions: 40" in length; 36" in width; 43" in depth. Equipped with a side bolt down access door, 8-1/2" OD / 6" ID flanged product intake port, 12" diameter x 40" long chamber with squirrel cage fan, 6" diameter x 40" long stainless steel product screw, 5" OD husk (bad product) discharge port, and rice (good product) is discharged thru bottom of separator. Primarily used in rice hulling process, after removing the husk from paddy by a hulling machine the aspirator then separates the husk from the rice by clean positive air flow.

OAD: 60" L x 48" W x 72" H

More Photos: 3

Carter Day WZ2, 25" Disc separator designed for high capacity, length sizing, and stem separation of free flowing granular products capable of doing up to 550 Bushel@Hour on rice product. Double stacked separators, are arranged for parrallel product flow, used for larger capacity volumes. Has 30" diameter x 82" product separation chambers with twenty 25" diameter discs with "ALPHA style pockets" (3/8" x 1/2" in staggered pattern) in each chamber. Top product infeed, and bottom discharge for separated product, side bottom discharge valve for the separated stems, and has a 5 hp "V" belt sprocket to motor drive.

OAD: 96" L x 48" W x 80" H

More Photos: 3

Carter Day BU3, 25" Disc separator designed for high capacity, length sizing, and stem separation of free flowing granular products capable of doing up to 550 Bushel@Hour on rice product. Double stacked separators, are arranged for parrallel product flow, used for larger capacity volumes. Equipped with 30" diameter x 82" product separation chambers with twenty 25" diameter discs with "ALPHA style pockets" (3/8" x 1/2" in staggered pattern) in each chamber. Top product infeed, and bottom discharge for separated product, and side bottom discharge valve for the separated stems, and has a 5 hp "V" belt sprocket to motor drive.

OAD: 96" L x 48" W x 80" H

More Photos: 3

Carter Day WY4, 25" Disc separator designed for high capacity, length sizing, and stem separation of free flowing granular products capable of doing up to 550 Bushel@Hour on rice product. Double stacked separators, are arranged for parrallel product flow, used for larger capacity volumes. Equipped with 30" diameter x 82" product separation chambers with twenty 25" diameter discs with "ALPHA style pockets" (3/8" x 1/2" in staggered pattern) in each chamber. Top product infeed, and bottom discharge for separated product, side bottom discharge valve for the separated stems, and has a 5 hp "V" belt sprocket to motor drive.

OAD: 96" L x 48" W x 80" H

More Photos: 2

Carter Day WY2, 25" Disc separator designed for high capacity, length sizing, and stem separation of free flowing granular products capable of doing up to 550 Bushel@Hour on rice product. Double stacked separators, are arranged for parrallel product flow, used for larger capacity volumes. Equipped with 30" diameter x 82" product separation chambers with twenty 25" diameter discs with "ALPHA style pockets" (3/8" x 1/2" in staggered pattern) in each chamber, top product infeed, bottom discharge for separated product and
side bottom discharge valve for the separated stems. 5 hp "V" belt sprocket to motor drive.

OAD: 96" L x 48" W x 80" H

More Photos: 4
Play Video

Sweco, 30" diameter, stainless steel, three deck, two screen, vibratory sifter rated up to 1000 lbs per hour - depending on materials and application. Equipped with 7" high top deck, 7" high middle deck, 6" high bottom deck, and two 6" diameter discharge ports. Mounted on a pedestal style base.

OAD: 32" L x 48" W x 32" H