See us at the PMCA Show in Lancaster, PA on 4/15
Home ยป Paul O Abbe
Paul O Abbe Model 1/2 cubic foot working capacity 304 stainless steel, jacketed ribbon Blender. Jacketed rating of 14psig. Center bottom discharge.
OAD: 32" L x 16" W x 48" H.
Paul O Abbe, 1.7 ft³, total 1.2 ft³ working capacity stainless steel, roto cone blender with the number of pounds of product per hour – depending on materials, application and machine configuration. Equipped with 24" high cone shell with 10" top and bottom slants and 7" straight wall, with 5" OD top product port with clamp down cover and 7" OD discharge valve with 32" floor clearance, chain and sprocket drive has safety guarding and controller with start, stop push buttons. Mounted on (4) legs with forkable platform.
OAD: 76" L x 32" W x 62" H
Paul O Abbe, Model RB-10, 10 ft³, 304 stainless steel, double ribbon mixer. Inner mixing chamber dimensions of: 39" in Length; 22" in Width; 25" in Depth. Equipped with top mounted product feed hopper with safety grate and flip up / clamp down interlock safety cover and 5 Hp drive. Bottom pneumatic flap valve discharge has 16" x 12" flanged bottom and 10" x 3" ID of chute discharge with 35" ground clearence. Variable speed and e-stop. Rate dependent on materials, machine configuration and application.
OAD: 73"L x 38"W x 82"H
Paul O Abbe, Model RB-10, 10 ft³, double ribbon mixer with amount of product per hour – depending on materials and application. 304 stainless steel contact parts. Inner mixing chamber dimensions of: 39" in Length; 22" in Width; 25" in Depth. Equipped with top mounted product feed hopper with safety grate and flip up / clamp down interlock safety cover and 1½" wide x (3/8)" thick (outer) and 2" wide x ¼" thick (inner) stainless steel ribbons double ribbons powered by 5 Hp drive. Bottom pneumatic flap valve discharge has 16" x 12" flanged bottom with 35" ground clearence. Controls have valve open / close switch and variable speed control and e-stop. Mounted on heavy duty frame.
Paul O Abbe, 20 ft³ total capacity (15 ft³ working capacity), 316 stainless steel, double cone mixer. Equipped with (1) 14" ID product port with clamp down cover, 45" long x 42" diameter shell powered by 5 Hp motor drive, pin bar and 8" ID butterfly valve discharge. Requires 80" ceiling clearance with 30" swing radius / 60" swing diameter. Mounted on heavy duty base frame.
OAD: 110"L x 45"W x 70"H
Stainless steel double arm sigma mixer. Capacity: 20 gallon working (40 gal overall). Chamber dimensions: 21" in Length; 25" in Width; 23" in Depth. Equipped with hydraulic tilt bowl, low pressure jacket and cover.
OAD: 94"L x 44"W x 54"H
Sign up for our newsletter to receive the latest in packaging tips, case studies and more.