Used Screw Equipment
30 Air Compressor machines IN-STOCK!

More Photos: 4

Curtis Masterline CV96A, 5hp, horizontal, reciprocating ari compressor rated up to 18.2 cfm @ 175 psi - depending on materials and application. Equipped with an 80 gallon supply tank, pressure lubrication system, pressure guage, and a 5hp V-belt drive.

OAD: 64" L x 23" W x 53" H

More Photos: 4

50 hp, two stage, oil free, electra screw, rotary air compressor rated up to 238 cfm - depending on materials and application. Pressure rating: up to 100 psig. Equipped with a touchpad operator interface with visual display and safety guarding.

OAD: 118" L x 56" W x 64" H

More Photos: 2

1/2 horse power, single stage, reciprocating air compressor rated up to 4.4 scfm @ 80 psi. Pressure rating: up to 160 psi. Equipped with a 30 gallon tank, pressure guage, and two 1/2" NPT connections.

OAD: 46" L x 24" W x 48" H

More Photos: 2

25 HP, 2-Stage, reciprocating air compressor rated up to 124.5 scfm. M.A.W.P.: 200 psi @ 650° F. Equipped with a 200 gallon tank, pressure guage, 1" NPT connection, and two 2" threaded inlet / outlets.

OAD: 66" L x 36" W x 64" H

More Photos: 2

25 Hp, SSR-EP25 rotary screw air compressor and DXR100 refrigerated air dryer. Air compressor: rated up to 97 scfm. Pressure rating up to 125 psig. Equipped with a 20 ft³ holding tank, touchpad controller with LED display, and 1-1/2" NPT connections. Air dryer: rated up to 100 scfm. Pressure rating: up to 250 psi. Equipped with 1-1/2" NPT connections.

OAD: 60" L x 36" W x 72" H

More Photos: 2

Two stage, 7.5 hp, oil free, "Cold Trap", Refrigerated air dryer rated up to 1,050 scfm @ 100 psig. Pressure rating: up to 200 psi. Inlet temperature: up to 100° F. Operating air temperature: 33° to 39° F. Equipped with 7.5 OD / 3.5" ID inlet / outlets, air to air heat exchanger, flooded shell evaporator, moisture separator, cold coalescing element, variable dew point temperature controls, and variable drain time controls. Refrigerant: R22; 37 lbs.

OAD: 78" L x 48" W x 61" H

More Photos: 2

250 hp, 2 stage, rotary screw air compressor rated up to 1,250 scfm - depending on materials and application. MAWP: 200 psi @ 300° F. MDMT: -20° F @ 200 psi. Ambient temperature: up to 115° F. Equipped with flanged 12" flanged inlet, 3" threaded outlets, touch pad controller with LED display, and locking safety doors.

OAD: 152" L x 84" W x 81" H

More Photos: 1

More Photos: 2

3/4 Hp, refrigerated three in one air dryer rated up to 50 cfm @ 175 psi. Dew point: 35° F. Temperature rating: up to 180° F. Equipped with 1" NPT inlet / outlets. Refrigerant: R-22.

OAD: 32"L x 21"W x 27"H

More Photos: 2

More Photos: 2

More Photos: 2

30 hp, single stage, air cooled, positive displacement, electra screw compressor

4 helical lobes 90° apart.

More Photos: 2

Single stage, rotary screw, air compressor with a maximum capacity of 23 cfm @ 100 psig. Has a 5 hp drive, 3/4" dia NPT cooling air inlet, 4 micron air intake filter, and a full sound-insulated cabinet 65 db(a). Has a 11 ft³ (80 gal), storage tank and a control box with a digital temperature read out.

OAD: 74"L x 34"W x 66"H

More Photos: 2

True-cycling, large capacity, refrigerated compressed air dryer with a maximum capacity of 4800 scfm @ 100 psig and 100°F, maximum working pressure of 220 psig, and working temperature range of -20° - 150°F. Has (2) 13.5 hp air compressors, (8) fans with 1/4 hp motors, (2) 1/2" ID no air-loss condensate drains, (2) air filters with 9" OD / 4-1/2" ID flanged inlet / outlets with 3/4" bolt holes on 2" centers, touch pad operator interface with LED display, and (2) suction pressure and (2) discharge pressure gauges. Mounted on a 92"L x 56"W x 4"H common base frame.

OAD: 98" L x 60" W x 98" H

More Photos: 4

350hp, Single-stage, air cooled aftercooler with 10 Hp fan. Oil-injected, rotary screw air compressor, with a maximum capacity of 1500 cfm, maximum operating pressure of 150psi, and working temperatute range of -20° - 650°F. Has a 75 gallon compressed air holding tank, with oil filters, Dual inlet air filters 9" OD / 4" ID flanged inlet with 3/4" bolt holes and 4-1/2" centers, (2) 7.5" OD / 3" ID flanged compressed air inlet/outlet with 3/4" bolt holes and 3-1/2" centers, Air lines after cooler and from surge tyank- (2) 3-1/2" OD / 2-3/4" ID threaded inlet/outlets. Has Quincy control box with oil filters, air/oil seperator, air pressure gauges, air outlet temperature, oil inlet temperature, and % capacity gauges. Mounted on a 128"L x 70"W x 10"H common base frame.

OAD: 132"L x 104"W x 76"H

More Photos: 2

5hp, single stage, reciprocating, dual cylinder "oil free" air compressor capable of 21scfm @ 75psi. Duplex tank mounted unit has NEMA 4 controls, 80 gal tank, 1.5" threaded ID outlet with flow control valve, and a manual tank drain and service valve.

OAD: 78"L x 40"W x 60"H

More Photos: 2

Burton Corblin Model P123-HG335 2005 Reciprocating Air Compressor, Series BCC, Serial Number 26913, 190-NM3H, Unit is Skid Mounted with ABB 86KW (Approx. 115 HP)/1770 RPM/ 60Hz/ 3Ph Drive Motor and Control Panel. Rated at 600 (42 Bar) PSI Discharge Pressure. Unit also has an Ingersoll Rand Model CAF-CV1 Intake Air Filter/Silencer. Previously Operating in Large PET Bottling Facility With Bottle Blow Molder.

OAD: 80"L x 112"W x 92"H

More Photos: 3

More Photos: 1

1/2 Hp, refigerated three in one air dryer rated up to 30 cfm - depending on materials and application. Dew point: 35° F. Temperature rating: up to 180° F. Equipped wtih 1" NPT inlet / outlets. Requires R-22 refigerant.

OAD: 20"L x 32"W x 30"H

More Photos: 2

Single stage, 15 HP compressed air dryer rated at 3,250 SCFM at 150 psig. Refrigeration test pressure (low) 150 (high) 150. Max inlet air temp is at 130F. Refrigerant: 50 lbs of R22.

OAD: 100" L x 88" H x 77" W

More Photos: 1

75 horsepower rotary screw air compressor. Compressor capacity of: 325 cfm @ 125 psi. Water cooled.

OAD: 110" L x 52" W x 55" H

More Photos: 1

Oil-free 75hp, water cooled, rotary screw compressor capable of 300 cfm output. Has max working pressure 110psi (max pressure 120psi), 6605 rpm, cooling water in/out port, drain water out port, potable water in port, and AEON 9000 lubricant and holding tank. Equipped with E-stop, LED displays for discharge pressure and discharge temperature; controls for constant run, auto lead, and auto lag; and warning lights for high temperature, motor overload, change water filter, and low oil pressure.

OAD: 92"L x 54"W x 68"H

Air cooled, piston, air dryer, compressor capable of 48scfm @ 100psig @ 100F (ambient). Has working pressure of 200psi, test pressure of 300psi, 2" O.D. threaded air outlet, 2" O.D. threaded air inlet, refrigerant analyzer pressure guage, air pressure out guage, and high temperature indicator light. Mounted on painted steel frame.

OAD: 32"L x 24"W x 39"H

More Photos: 1

10 HP Reciprocating air compressor rated to 35.2 scfm @ 200 psi.
National Board # 934768.

OAD: 82" L x 38" W x 72" H

More Photos: 2

250 HP Centac, oil free centrifugal, 2 stage air compressor. Water cooled, 1000 CFM at 125 psi and equipped with Zeks 12hp air dryer.

More Photos: 1

Refrigerant (R-12) cooled compressor/condenser rated at 150 psi low side, and 300 psi high side. Features forty 20"L condensing loops, a 14" diameter fan, and a 20"L x 21 1/2"H condensing area. Equipped with a 1" diameter refrigerant intake pipe. Powered by a 1/3hp GE motor. Mounted on raised base with four legs.

OAD: 25"L x 25"W x 32"H

More Photos: 1

1/2 hp, Ingersoll Rand Dryer. Maximum inlet air pressure 75 Cfm @ 250 psi. Maximum inlet air temp 130 degree F. with min/max ambient temp(F degree) 40/120. Equipped with motor start switch and on board system operation monitor.

OAD: 36"L x 28"W x 36"H

Two stage, 20 HP air compressor rated at 80.6 CFM at 100 # pressure. Ruggedly constructed floor mounted air cooled unit, complete with teflon rings on cylinders allowing for virtually "OIL FREE" air production. Most commonly used in food and pharmaceutical applications. Maximum rating of 72.6 CFM at 125 # pressure.
OAD= 64" W x 50" L x 72" H

Ingersoll Rand Model LL5A150 complete compressed air plant. Electrical motor driven 2 stage, double acting water cooled, heavy duty, crosshead reciprocating air compressor. Equipped with flanged mounted induction motor, water intercooler and aftercooler, 3 step constant speed regulation, separtate motor driven cylinder lubricator, air inlet filter-silencer and contorl panel. 16 1/4' x 10' x 5', current meter reads 5,285 hours used. Also has a Zurn Model R100A refrigerated air dryer with maximum working pressure of 200 psig specs and dimensions based on 100 psig at 100 deg f. capacity 35 deg f dewpoint 500 scfm auto drain float trap 3" NPT inlet / outlets, this is a refrigeration unit and runs on Freon, and is powered by a 150hp motor.

This Nonlubricated, Water Cooled Unit Complete W/Nema Motor; Inlet Air Filter; Belt Drive; Auto Start/Stop; Asme Code 60 Gal Receiver And Totally Enclosed Belt Guard. Maximum Pressure: 100 Psig Actual Operating Capacity: 75 Cfm @ 7.4 Psig To 100 Cfm @ 6.9 Psig. Nat'L Board #: 69586b Rated For 200 Psi (Working) @ 450 Degrees F

OAD: 22"W X 49"L X 45"H
505 Lbs