Used Glue Equipment
52 Case Erector machines IN-STOCK!

More Photos: 4

WRITE-UP-IN-PROGRESS
K & R, automatic, case erector, bag inserter, bottom taper, rated from 5 to 20 cases per minute - speeds depending on materials and application. Case size range: 12" to 22" in Length; 9" to 16" in Width; 8" to 18" in Height. Equipped with suction cup vacuum pick and place, 120" long side gripper belt conveyor, minor flap closers, bag open / inserter, mechanical finger grips, air evacuation vacuum system to bring the poly bag flush with the five inner sides of the case, major flap folders, 2" bottom case taper, PLC, with control panel and Lexan safety guarding.

OAD: 180" L x 80" W x 84" H

More Photos: 4

Wexxar Model WFT, automatic, pin and dome, case erector, bottom taper rated from 5 to 20 cases per minute - speeds depending on materials and application. Case size range: 7" to 22" in Length; 6" to 17" in Width; 6" to 34" in Height. Blank case size range: 16" to 39" in Length; 9" to 39.5" in Width. Equipped with 72" long blank case magazine, pin and dome case erecting system, bottom tape head, two 36" long hand crank adjustable side gripper belts, A/B PLC, push button controls, and interlocking safety guarding. Mounted on height adjustable legs.

OAD: 170" L x 60" W x 80" H

More Photos: 4

McDowel 201LH, Automatic, case erector bottom sealer rated from 5 to 30 cases per minute - depending on materials and application. Case size range: 5-3/4" to 24" in Length; 5-3/4" to 24" in Width; 10" to 33" flat blank Height. Equipped with a 24" long blank case magazine, two suction cup pick and place, plows and flap closers, single arm compression ram, powered height adjustments, Lexan safety guarding, and push button controls.

OAD: 96" L x 90" W x 76" H

More Photos: 4

Little David CF40T, Automatic, case former, bottom taper rated from 5 to 30 cases per minute - depending on materials and application. Case size range: 7" to 24" in Length; 6" to 16" in Width; 4" to 16" in Height. Equipped with 54" x 40" blank case magazine, 4 suction cup reciprocating pick and place, bottom minor & major flap closers, 72" long lugged case transfer conveyor, 2" bottom tape head, Lexan safety guarding, and push button controls. Mounted on height adjustable legs and casters.

OAD: 140" L x 108" W x 68" H

More Photos: 4

Combi America Model 2-EZ, automatic case erector and bottom taper rated from 3 to 12 cases per minute - speeds depending on materials and application. Case size range: 6" to 20" in Length x 4-1/2" to 16" in Width x 4-1/2" -18" in Height. Equipped blank case magazine, suction cup-pic-in-place, minor and major flap closers, mechanical pusher bar, quick-release slide out 3M Accuglide II tape head, no-tool adjustments, self cleaning vacuum system, interlock safety guarding, start and e-stop push buttons, steel-it painted finished frame with adjustable discharge height from 18" to 32".

OAD: 96" L x 60" W x 61" H

More Photos: 4

Durable Model TGA200IQCL, automatic, case erector, bottom taper capable of speeds from 5 to 20 cases per minute - speeds depending on materials and application. Case size range: 8" - 20" in Length; 6" - 16" in Width; 4" - 16" in Depth. Equipped with 48" long magazine, pneumatic three suction cup case pick and place, 2" wide pressure sensitive tape head, and dual 60" x 2-1/2" side belt asset conveyors with Lexan safety guarding. Mounted on casters.

OAD: 115" L x 96" W x 52" H With Magazine

More Photos: 4

Bemis Model 1575, automatic, poly bag inserter rated from 5 to 15 bags per minute - speeds depending on materials and application. Case size: 8" to 20" in Length; 4" to 16" in Width; 10" to 22" in Height (contains top flap height in vertical position). Bag size: case width + 7"; case depth + 5". Bag Roll Specifications: up to 10-3/4" in Diameter; up to 27-3/4" in Width; 3" Core. Equipped with a 96" long x 15" wide neoprene case conveyor with adjustable guide rails, vacuum pick and place / bag opener / inserter, Lexan safety guarding, status bar, and A/B PLC. Mounted on height adjustable legs.

OAD: 84" L x 63" W x 112" H

More Photos: 4

Bemis Model 1575, automatic, poly bag inserter rated from 5 to 15 bags per minute - speeds depending on materials and application. Case size: 8" to 20" in Length; 4" to 16" in Width; 10" to 22" in Height (contains top flap height in vertical position). Bag size: case width + 7"; case depth + 5". Bag Roll Specifications: up to 10-3/4" in Diameter; up to 27-3/4" in Width; 3" Core. Equipped with a 96" long x 15" wide neoprene case conveyor with adjustable guide rails, vacuum pick and place / bag opener / inserter, Lexan safety guarding, status bar, and A/B PLC. Mounted on height adjustable legs.

OAD: 84" L x 63" W x 112" H

More Photos: 2
Play Video

Little David ModelCF30T, automatic, case erector and bottom taper rated from 3 to 10 cases per minute - speeds depending on materials and application. Case size range: 8" to 18" in Length; 8" to 15" in Width; 6" to 15" in Height. Equipped with a 72" long blank case magazine, vacuum pick and place, flap plows and closers, 2" bottom tape head, A/B PLC, and Lexan safety guarding.

OAD: 158" L x 55" W x 72" H

More Photos: 4

Marq Model HPE215, automatic, case erector, bottom taper rated from 5 to 15 cases per minute - speeds depending on materials and application. Case size range: 8" to 27" in Length; 5.25" to 17" in Width. 3.5" to 18" in height. Flat case blank size: 14.75" to 44" in Length; 10.5" to 33" in Width. Equipped with a continuous feed magazine, top and bottom vacuum suction cup pick off, lugged chain case conveyor, minor and major flap closers, top squaring device, 2" tape head, PLC, and a touch pad controller with visual display. Mounted on height adjustable legs.

OAD: 96" L x 90" W x 64" H

More Photos: 2

Marq Model HPE3154RH, Automatic, case erector, bottom taper rated from 5 to 15 cases per minute - speeds depending on materials and application. Case size range: 8" to 27" in Length; 5.25" to 17" in Width; 3.5" to 18" in Height. Equipped with a continuous feed magazine, top / bottom vacuum suction cup pick off, lugged chain case conveyor, minor and major flap closers, top squaring device, 3M Accuglide pressure sensitive 3" tape head, PLC with touch pad controller, and safety guarding. Mounted on height adjustable legs and casters.

OAD: 91" L x 82" W x 72" H

More Photos: 4

ABC Model 500, automatic, continuous motion, hot glue, case erector and bottom sealer, rated from 20 to 55 cases per minute - speeds depending on materials and application. Knock down case size: 14-1/4" to 29-3/4" in Length; 12-1/4" to 26" in Width. Equipped with a 32" long blank case magazine, reciprocating vacuum pick and place, lugged chain carrier system set on 32" centers, top squaring conveyor, minor and major flap closers, two compressing rams, hot melt glue system, and interlocking Lexan guarding.

OAD: 180" L x 84" W x 68" H

More Photos: 2
Play Video

Wexxar Model WFT, automatic, pin and dome, case erector, bottom taper rated from 5 to 20 cases per minute - speeds depending on materials and application. Case size range: 7" to 22" in Length; 6" to 17" in Width; 6" to 34" in Height. Blank case size range: 16" to 39" in Length; 9" to 39.5" in Width. Equipped with 72" long blank case magazine, pin and dome case erecting system, 3" bottom tape head, two 36" long hand crank adjustable side gripper belts, A/B PLC, push button controls, interlocking safety guarding, statis light bar and mounted on height adjustable legs.

OAD: 170" L x 60" W x 80" H

More Photos: 4

Elliott Model 80EG, automatic, case erector and bottom sealer rated from 8 to 25 cases per minute - speeds depending on materials and application. Case size range: 8" to 23" in Length; 6" to 16" in Width; 3" to 16" in Height. Equipped with a 72" long x 44" wide bank case magazine, reciprocating vacuum pick and place, reciprocating case indexing system, minor flap closer, major flap plows, single arm compression ram, and Lexan safety guarding. Mounted on height adjustable legs.

OAD: 132" L x 126" W x 104" H

More Photos: 2

K & R Model PBI32, automatic, case erector and bag inserter with bottom taper, rated from 5 to 20 cases per minute - speeds depending on materials and application. Case size range: 12" to 22" in Length; 9" to 16" in Width; 8" to 18" in Height. Equipped with a 72" long blank case magazine, 3 suction cup vacuum pick and place, 108" long side gripper belt conveyor, minor flap closers, bag open / inserter with mechanical finger grips, air evacuation vacuum system to bring the poly bag flush with the five inner sides of the case, major flap folders, 2" bottom case taper, A/B PLC, push button controls, and Lexan safety guarding.

OAD: 197" L x 76" W x 100" H

More Photos: 2

Dyna Pack Model C0P3, Case erector and positioner with number of cases per minute - depending on materials and application. Equipped with 52" Long x 34" Wide two chain powered flat blank case magazine, three pivoting pneumatic arms with suction cups and three pneumatic minor, major flap closers. The combined operation will pull, erect, close flaps and position empty case to advance to case packing operation. Start/stop push bottons and e-stop.

OAD: 136" L x 48" W x 81" H

More Photos: 2

Pearson Model Y1928, automatic bag inserter rated from 5 to 25 cpm - speeds depending on materials and application. RSC case size range : 9.5" - 24" in Length; 9.5" - 17" in Width; 10" - 24" in (open) Depth. Bag size range: up to 21" in Length; up to 26" in Width; up to 52" in Perimeter. Equipped with bag opening carriage with vacuum cup assist, four corner cuffing rods and single head bag inserting head, PLC controller, vacuum pump, safety guarding and e-stop. Inserts pre-performed roll stock or gusseted bag stock into cases, filling all corners and cuffing the bag around the outer perimeter.

OAD: 84" L x 80" W x 100" H

More Photos: 2

Automatic, case erector, bottom taper capable of speeds up to 30 cpm - speeds depending on material and application. Equipped with 45" L x 28" W x 30" H, automatic blank case magazine, with top and bottom vacuum suction cup pick-off, minor and major flat closers, 84" L top squaring device, 3M Accuglide 2" P/S tape head, and slide door saftey guarding.

OAD: 141" L x 45" W x 83" H

More Photos: 1
Play Video

Automatic, H/M glue, tray former "bliss" style capable of speeds up to 35 tpm, depending on tray type. Tray size range of: 11" - 24" L x 8" - 20.5 " W x 4" - 12" H, has a top 54" L x 19" W, and (2) side 48" L x 11" W blank tray magazines, with vacuum pick - n -place, center guide rollers, forming mandrel, and a 21" tray discharge height. Mechanical drive with start / stop, glue, mag, jog, cycle, on /off control switches, e-stop, and a Nordson glue system. A/B SLC

OAD: 103" L x 60" W x 100" H

More Photos: 2

Wexxar Model ABH, automatic, hot melt glue, tray former "bliss" style capable of speeds from 10 to 35 trays per minute - speeds depending on material and application. Tray size range: 11" - 24" L x 8" - 20.5" W x 4" - 12" H, has a top 54" L x 19" W, and (2) side 48" L x 11" W blank tray section magazines, with vacuum pick - n -place, center guide rollers, forming mandrel, has 21" tray discharge height, with a Nordson 3700 (2) gun H/M glue system, mechanical drive with start / stop, glue, mag, jog, cycle, on /off control switches, and e-stop.

OAD: 103" L x 60" W x 100" H

More Photos: 2

Wexxar Model ABH, automatic, hot melt glue, tray former "bliss" style capable of speeds from 10 to 35 trays per minute - speeds depending on material and application. Tray size range: 11" - 24" L x 8" - 20.5" W x 4" - 12" H, has a top 54" L x 19" W, and (2) side 48" L x 11" W blank tray magazines, with vacuum pick n place, center guide rollers, forming mandrel, and 21" tray discharge height, with a Nordson 3700 (2) gun H/M glue system.
mechanical drive with start / stop, glue, mag, jog, cycle, on /off control switches, and e-stop.

OAD: 103" L x 60" W x 100" H

More Photos: 2
Play Video

Pearson Model R211, automatic case erector and bottom sealer rated from 10 to 35 cases per minute - speeds depending on materials and application. Case size range: 10" to 23-1/2" in Length; 6" to 16" in Width; 6" - 21" in Depth. Knockdown case sizes: 16" to 37" in Length; 9" to 29" in Width; with a bottom flap height of 3" to 8". Equipped with 96" L x 30" W blank case magazine, (2) suction reciprocating blank cup pic-n-place, case minor flap closer, and major flap closing rails, bottom single compression ram, PLC controller, and safety guarding.

OAD: 240" L x 84" W x 92" H

Lantech Model CE1000ADJ, automatic, inline stainless steel case erector, bottom taper rated from 5 to 18 containers per minute - speeds depending on materials and application. Case size range: 12" - 19" in Length x 6" - 12" in Width x 6" - 12" in Height. Equipped with a powered blank case magazine with 40" long x 18" wide belt conveyor, (4) suction cup pic n place and (2) suction cup case erector, 60" long top and bottom lugged case transport conveyors with 40" discharge height, minor and major flap closers, 2" wide tape head and is hand crank adjustabe. Features: A/B PLC with on, off, manual, auto and vacuum controls, e-stop, saftey guarding is quick change over capable and mounted on a stainless steel base frame.

OAD: 193'' L x 56'' W x 83'' H

More Photos: 2

Serpa Model 2500CE, automatic case erector, bottom taper capable of speeds from 5 to 25 cpm - speeds depending on material and application. Case size range : 5" - 18" L x 5" - 14" W x 3" - 24" H, has carton blank magazine, (4) cup vacuum pic n place, lugged case transport conveyors, with top case squaring device, 2" bottom tape head, A/B PLC, A/B VFD, servo drive, Seiko gauges, e-stop, base frame has height adjustable legs and safey guarding.

OAD: 150" L x 84" W x 80" H

More Photos: 2

Little David Model CF40T, automatic case former and bottom taper rated from 5 to 20 case per minute - speeds depending on materials and application. Case size range: 7" to 24" in Length; 6" to 16" in Width; 4" to 16" in Height. Equipped with 54" x 40" blank case magazine, mechanical case opener, bottom minor & major flap closers, case transfer system with 72" side chained conveyor & 2" x 1-1/2" lugs, 2" bottom taper, low hopper alarm and low tape alarm.

OAD: 132"L x 108"W x 68"H

More Photos: 2

Moen Model PF106HI, automatic, vertical, corrugated "H" style partition inserter capable of speeds from 10 to 45 inserts cases per minute - speeds depending on material and application. Can run in conjunction with standard "RSC" case or "H" style bliss box formers with cases from min / max range of: 10" - 24" L x 10" - 16" W x 7" - 15" D. Equipped with a 36" x 48" blank insert magazine, (3) wheel feed system, pneumatic pusher arm and a die compression section with ram arm, and 4 sided forming insertion station. Moen M3-A (2) gun H/M glue system, control panel, with on / off feed wheel, "H" feed, and die compress controls.

OAD: 107" L x 65" W x 99" H

More Photos: 2

Padlocker Model CF1511OWF automatic, intermittent motion, case erector, bottom glue sealer capable of speeds from 10 to 45 cpm - speeds depending on material and application. Small footprint, heavy duty constructed unit can handle both RSC, and HSC cases, with case size range of : 8" - 22.5" L x 4" - 14" W x 5" to 15" D, and knock down blank size range of : 13" - 34" L x 11 - 24" W, 24"L x 20" W blank case magazine, with belt conveyor, 48" L angled case magazine, vacuum cup recipicating blank case pic n place, pneumatic closers, pneumatic single arm ram compression station, to be used with stand alone H/M glue unit, PLC, with A/B touch pad controller with panel view.

OAD: 168" L x 104" W x 76" H

More Photos: 2

Wexxar Model WFHT Jr, automatic, inline case erector, bottom sealer hot melt glue capable of speeds from 5 to 20 cases per minute - speeds depending materials and application. Case size range: 8" - 20" in Length; 6" - 16" in Width; 9-1/2" - 23" in Height. Knock down case size of: 16" - 38" in Lenght; 12" - 26-1/2" in Width. Equipped with a 72" long magazine, recipicating case forming plates, minor and major flap closers, single arm case compression ram, with 24" L dual side roller discharge section. A/B PCU, with start, stop, glue, and ram arm controls with e-stop, statis light bar, and saftey guarding.

OAD: 150" L x 56" W x 100" H

More Photos: 2

Automatic bag inserter rated up to 15 cases per minute - depending on materials and application. Case size range: 8" to 20" in Length; 4" to 16" in Width; 10" to 22" in Depth. Length of bag cuff overlay/depth, and width is (+ 5" depth) x (+ 7" width). Equipped with case indexing system and AB Micrologix 1000 PLC. Unit is designed to receive an erected and bottom sealed case, insert a bag from a roll of performed stock into case and cuff the top over container flaps.

OAD: 86" L x 56" W x 90" H

More Photos: 4

Durable Model CE50L, automatic, pneumatic, left-hand case erector capable of speeds from 5 to 15 cpm - speeds depending on material and application. Case size range: (8" - 20"L) x (6"- 16"W) x (4"- 16"H). Equipped with a (48"L) case magazine, 3 cup vacuum pick off, and Durable's Pneu-Arm which cradles and supports in cases while erecting.

OAD: 80"(L) x 90"(W) x 64"(H)