Used Tablet Equipment
48 Complete Line machines IN-STOCK!

More Photos: 4
Play Video

Complete filling, capping and labeling line rated up to 100 cpm - depending on materials and application. Line consists of 42" diameter disc unscramber feeding into 10 head inline pressure over flow liquid filler with touch screen interface controls. Model ASC 6, three station / six spindle capper with cap sorting hopper and has cap size range of: 10mm - 120mm. Labellete Model APS-106 pressure sensitive spot / wrap labeler has label size range of: 1/2" - 22" L x 3/4" - 5-3/4" H and a 120" L x 4-1/2" W plastic delrin product conveyor belt and a 42" diameter disc accumulator.

OAD: 352" L x 84" W x 87" H

More Photos: 2

Automatic, stainless steel, blister sealing, and cartoning line. Features a Starview CBS 22-12x36 blister sealer, Consolidated Technologies transfer mechanism, and a Consolidated Technologies horizontal tuck cartoner. Speed dependant on materials and application.

Blister sealer: Equipped with blister feed station, open area for product load system, card feed station, seal station, A/B PLC and Panel View, and interlocking Lexan guarding.

Transfer Mechanism: Equipped with a five suction cup transversing pick and place, accumulation area, leaflet feeders, lugged right angle discharge conveyor and interlocking Lexan guarding.

Cartoner: Equipped with an 18" long blank case magazine, two head rotary pick and place, two chain carrier system set on 10" centers, top compression section, minor flap closers, major flap plows, tucking assembly, A/B PLC, and interlocking Lexan guarding.

More Photos: 3

Complete cup / tub filling line. System designed to denest, fill, tamper evident seal, overlid, front and back label, top label, wrap around case pack, and seal. Includes a Holmatic PR1S, Chicago Automation pressure sentitive labeler, and a TAD wrap around case packer and sealer. Last used in a food application filling 2 lb 5 oz tub.

More Photos: 2

Automatic, stainless steel, continuous motion, shrink, neck bander or sleever and steam tunnel rated up to 130 cpm - depending on materials and application. Band size range: 10mm to 75mm in Diameter; 15mm to 180mm in Height. Equipped with 60" long x 2-1/2" wide product conveyor (requires belt), 24" dual worm screw in feed, 20" diameter sleeve reel, static eliminator, knife cut-off, PLC and interlock safety guarding.
Steam tunnel. Aperture: 10" in Height; 7" in Width; 80" in Length. Dual zone chamber with 4 rows of tubes on each side 16 rows total and adjustable steam distributors with external steam volume flow controls, temperatures up to 195 Deg F. Features: Steam filter, thermo-couple, and 120 " long x 2-1/2" wide conveyor (requires belt). Mounted on stainless steel frame.

More Photos: 4

Complete paint or adhesive filling, lidding, labeling and bail inserting line rated up to 50 gallon containers per minute - dependent materials, application and when using all 3 filling heads. Line consists of 60" OD empty container disc unscrambler, Ideal Model AFS-1-2780-3 filler / lidder able to be run 1, 2, or 3 heads with valves volumes from 1/2 pint to gallon and accuries of +/- .25% by volume, container lid feeder applicator with roller closer for friction and press on lids and a 48" OD x 48" straight wall product holding / feeding can no cover and has (3) side bottom 4" OD product discharge ports. Also features a Neway Model E5 roll thru hot glue labeler and a Heisler Model C Bail-O-Matic metal handle former and inserter for both metal and plactic containers.

More Photos: 2

Complete automatic, open mouth bag filling and sealing line rated uo to 1,200 bag per hour - depending on materials and application. Capable of handling paper or poly laminated woven cloth, woven cloth with inner laminate linning or polyethylene pre-made bags. Bag size range: 550 - 1050mm in Length x 400 - 520mm in Width x up to 75mm Gusset depending on type bag being run with a fill range from 20 - 50 kgs a bag. Line consists of American Newlong Model 3CM-P bagging machine with a three pocket pre-made bag magazine, suction cup bag pic n place automatically places bag to the hanger and opener, thru the Parsens EV-4 filler linear scale system, to a 153" L x 11" W discharge belt conveyor to the Newlong PBC pinch bottom bag sealer.

Bag Stitcher Trimmer Also Available at Additional Cost

OAD:

More Photos: 4

Complete integrated F/F/S system. Which includes a bucket elevator with vibratory pan, Ishida 8 head combination weigh scale system with platform, Ilapak F/F/S rated to 80 bags per minute - depending on materials and application. Bag size range: 2-3/4" - 14-3/4" in Width; 2-1/4" - 27-1/2" in Length. Equipped with 16" wide horizontal seal jaw and 16" vertical lap seal, with side belt assist, registration and touch pad controller with panel view. Maximum roll width 30-1/2" maximum roll diameter 23-1/2" on 3" core. Ishida Model CCW-Z-208B-S/30-PB 8 hd S/S combo scale system speeds up to 80 weighs a minute with double beam strain gauge weigh cell and ranges of: 25-1000 grams with accuracy of +/- 2 grams and maximum volume 4,500cc (per single dump), (8) 6" L x 5" W x 10" D S/S smooth surface vibratory pool / weight buckets, (8) 7" L x 5" W x 9" D S/S smooth booster buckets and discharge chutes to bagger.

OAD: 72" L x 55" W x 63" H Bagger
44" L x 44" W x 68" H Scale
140" L x 104" W x 136" H Scale Platform
148" L x 24" W x 174" H Bucket Elevator
97" L x 104" W x 172" H Vib Feeder & Platform

More Photos: 2

Complete 2-1/2 gallon ice cream processing, mixing, filling and lidding line rated to 400 gallons of ice cream per hour, at 22 deg f. Line speed are based on output of the KMLT340 (3) barrel ice cream freezer. Also has a CP Model S-420 ingredients mixer with Eriez dry ingredient feeder and a Tindall 2-/12 gallon ice cream container filler and lidder. Ingredients filler and mixing units work in conjuction with the freezer to accurately, and evenly meter ingredients into viscous liquid product stream such as fruits, nuts (the ingredient), ice cream (the product) from a continous ice cream freezer, which in turn can be used with the Tindall 2-1/2 gallon filler lidder, which is mounted on caster for easy movement in / out of production areas nad has direct a hookup to the continous freezers and can run products such as ice cream, sherbert, varigrated ice cream, and ice cream with fruit and nuts. Last running 2-1/2 gallon compsite ice cream container.

More Photos: 3

Complete automatic pallet straping and stretch wrapping system speeds - depending on materials and application Consists of a A. J. Gerrard pallet strapping system and a automatic Lantech stretch wrapper currently set for 1/2" plastcis straps with Osgard strapping head and dual strap fed conveyors with PLC controller as well as individual controllers, with connecting powered roller conveyor sections.

OAD: 494" L x 260" W x 138" H

More Photos: 3

Automatic chub filling, double clip closing system rated up to 50 cycles per minute - depending on casing and portion size. Consists of Vemag Model HP15C hydraulic driven vacuum stuffer, has 36" dia x 36" deep, 350 litre, tilt back, S/S product hopper with auger, side scraper and cover. Double screw product feed system, 40 bar maximum filling pressure, sanitary threaded discharge, top sample / site port with filter screen, knee level adjustment lever, vacuum gauge and oil-less vacuum pump. Poly Clip DFC 8161 double clipper for medium to large product chubs up to 200mm dia and can handle fibrous, collagen, and synthetic type casings, double clip magazine, for series 8700 clips, with 400 clip maximum capacity, 40" L product roller conveyor, adjustable link sizer flap, iris separator and skin brake.

OAD: 119" L x 82" W x 81" H

More Photos: 3

Complete bulk bag filling and sealing line speeds - depending on materials and application. Line includes: single head bulk bag filler, Model 6180 trim, weigh scale top off filler, to 84" L x 8" W belt conveyor to Model 2975, 93" L x 14" H dual side bag shaker settler into Model 132, a 45 deg turntable to 128" L x 8" W belt conveyor into Model 3181 deltaseal, cold glue bag closer / sealer, to Model 131, a 110" L x 5" W dual compression belt section, to 108" L x 5" W top flattner discharge conveyor. Last filling 25 lbs bags at 8 - 10 bpm

OAD: 278" L x 200" W x 123" H

More Photos: 4

Complete weighing, dissolving, rotary vacuum cooking and forming system rated from 300 to 1000 kg per hour depending on application. Can be used in production for hard candy, hard candy with center fillings, jelly, soft caramels and chewy candy products also. Consists of crystal free dissolving, pre cooking and vacuum cooking system for sugar water glucose slurry from a continuous steam heated heat exchanger, with holding tank and transfer pumps. Strada forming system for continuous production of formed sweets (unfilled, highly filled liquid) laminated for hard candy, chewy candy, toffee, eclairs production of unfilled up to highly filled quality candy with 15 to 180 mm per hour rope speeds, Consisting of batch roller with (6) S/S conical, ribbed product rollers measuring 72" L x 4" Dia at base and, 1 1/2" Diameter at tip and is used to shape product into a 4 roller rope stringer system for precise centering of the filling mass within the sugar rope through the roller head of the rope sizing machine, to rope cutter and cooling tunnel.

More Photos: 4

PART OF 5E4631AA
Hard candy kitchen and depositing line capable of up to 405 kg/hour with an output of up to 2600 pieces/minute with a weight of 2.6 grams per piece. Cooking kitchen consists of express dissolver with 300 liter stainless steel mixing vessel a 450 liter stainless steel kettle with 3 blade prop style agitation. APV Baker microfilm and APV Baker turbofilm cooking systems each with 2 zone plate and frame heat exchangers lobe transfer pumps, vacuum system and control panel. Bran Luebbe color/flavoring additive mixing, metering and feeding system.

Depositing line consists of APV Baker model 250 split hopper, double row depositor with with dual split product hoppers (20) stainless steel pistons each side total of 40 per hopper capable of 65 strokes/minute at 40 pieces per stroke. APV Baker ambient cooling tunnel measuring 20'L x 48"W with control panel with A/B PLC.

More Photos: 3

Complete powder bag filling, sealing and bundling line rated from 20 - 40 bags per minute - depending on materials and application and has adjustable weight ranges from 2 lb - 10 lbs. Line includes: (1) Bemis FF-108 (2) head, feeding, and filling machine, (1) 6180 trim, weigh scale fed top off filler, to 84" L x 5" W belt conveyor into (1) 2975, 83" L x 9" H dual side bag shaker, settler to a 132, 45 deg turntable to 176" L x 5" W belt conveyor into a 3181 deltaseal, cold glue bag closer / sealer, to a 131, 10' L x 4" W dual compression belt section, to 192" L x 5" W belt conveyor. Last running 5 lb pre-formed bags of flour at 40 bpm.

OAD: 732" L x 100" W x 146" H

More Photos: 3
Play Video

Complete powder bag filling, sealing, and bundling line capable of speed from 20 - 40 bpm, depending on size bag, and product filled, with adjustable weight ranges from 2 lb - 10 lbs. Line includes: (1) Bemis FF-108 (2) head, feeding, and filling machine, (1) 6180 trim, weigh scale fed top off filler, to 84" L x 5 3/4" W belt conveyor to (1) 2975, 84" L x 11" H dual side bag shaker, settler into 132, 45 deg turntable to 204" L x 7" W belt conveyor into a 3181 deltaseal, cold glue bag closer / sealer, to a 131, 10' L x 4" W dual compression belt section, (no conveyor section to the bundler) Great Lakes 16550-37CB shrink bundler with product collator, and single side product ram arm, and 37" W seal jaw, to Great lakes MP20/40/60/C4 shrink tunnel with 40" W x 20" H apeture x 60" L chamber, and a 132" L x 39" W nylon mesh conveyor belt. Last running 5 lb pre-formed bags of flour at 40 bpm.

OAD: 732" L x 100" W x 146" H

More Photos: 4
Play Video

Complete Line, automatic, powder / granule bag filling line consisting of a Thiele bag hanger, Hapman screw feeder, Merrick weigh feeder, stainless steel hopper, and a St. Regis v-trough discharge conveyor. Speeds: 4 to 8 bags per minute - depending on materials and application. Bags: gusseted sewn open mouth or pinch bottom bags multi wall paper bags, face width 11" - 18"; Length 25" - 37"; Gusset 1.5" - 4.5". Equipped with a 144" long empty bag magazine, vacuum pick and place, screw feeder, 48" long loss in weight feeder, bag filling spout, and a 264" long V-Trough discharge conveyor. Stainless steel contact parts.

Bag Sealer available at additional cost.

Fully automatic, complete liquid filling line capable of speeds up to 500 cpm. (depending on application). Comes with a Barry Wehmiller ZC4-1 S/S uncaser, US Bottlers 56 Hd rotary gross/net weigh liquid filler w/control system, Consolidated 16 Hd rotary capper w/hopper & cleated incline cap feeding system, Miller Hydro HS-40 servo laner drop caser, full case checkweigher and ABC case tape sealer.

More Photos: 2

Complete inline, tray filling, roll stock sealing line capable of doing up to 250 trays per minute - depending on materials and application. Equipped with inline (4) head pick-in-place tray denester, feeds onto a (2) lane conveying system, then to (4) head piston filler with jacketed product hopper, filled trays, conveyed to Raque HS2 (2) lane tray (8) heat sealer with lugged 2 lane discharge conveyor with rotary suction cup tray pick-off conveyor, currently set for 4 3/8" L x 3 1/4" W oval tray.

More Photos: 4

Oil fryer, cooking line capable of producing up to 3,000 lbs of finished tortilla corn chips per hour. Consists of Model CC2.0 continuous oil circulated, deep fryer rated to 3000 lb per hour on finished corn chip product. 76" W x 25' L frying chamber, has 50" W x 7" H product in feed and 55" W x 7" H product discharge, with a 55" W mild steel woven mess product discharge conveyor belt. Equipped with top paddles on mess belt to evenly push, and control floating products thru the oil for consistent cook times. Model AAC ambient air cooler, Model CTHX 3.0 vertical, stainless steel contact parts, tube and shell heat exchanger capable of heat transfer capacities up to 20,000,000 BTU per hour, Model DPF drum pre-filtration system, capable of filtering up to 5,000 gph of frying oil and circulating oil in system will pass through Model TD model 3610 continous coating drum with oil pump. 40 Hp Drive. Last running tortilla corn chips at 3000 lb per hour,

OAD: 832" L x 57" W x 129" H

More Photos: 4

Complete bagel line, capable of running up to 2400 bagels @ hour - depending on application. Consists of Winkler dough feeder, Admiral 4 pocket dough divider and rounder, 300mm wide transfer belt conveyor, intermediate proofer drying zone which takes moister out of bagel, with tilt station. Thompson bagel machine with dough weights between 50 - 80 grams, Mono rail system takes up and positions bagels, 550mm and 1100mm wide collecting conveyor belts, single row 8 pocket indexer, proofer, setting machine with 1100mm wide belt. Winkler electric heat tunnel style oven has 3 heating zones, wire mesh belt, with 1100mm infeed, 9000mm baking room and 1300mm discharge belt lengths, PLC controls, with boiler and infrared dryer. Last run pilot bagel operation, never run in production.

More Photos: 2

Automatic bottle filling and capping line capable of up to 420 bpm. Container sizes: 1" to 4" (Diameter) x 4 1/2" to 12" (H). Cap sizes: 1/2" (13mm) to 3 1/2" (89mm) diameter x 1" to 2" (H). Line consists of US Bottlers model GE48LS 48 head rotary gravity filler and Pneumatic Scale 12 head rotary air chuck capper. Both units have all S/S contact parts. Last running in a pharmaceutical facility.

More Photos: 2

Automatic, filling and capping line capable of up to 300 containers per minute. Containers: (1 1/2" - 3 3/4") dia x (2 1/2" - 14"H). Caps: 13mm - 89mm. Filler: 30-head rotary, neck centering guides, no container / no fill, fill height accuracy +/- .02" standard deviation. Capper: 8-head rotary, cap sorting bowl, air controlled capping chucks. Has cap / product presence inspection system, and 34 ft long x 3 1/4"W. Last running 8oz plastic containers with a child-proof 32mm cap.

OAD: 408"L x 72"W x 100"H

Complete automatic S/S net weigh filling line capable of speeds to 200 cpm, . Line consists of Omega RP series unscrambler w/ionized air cleaner, Pneumatic Scale 24 head net weigh filler synchronized with Pneumatic Scale 8 Head capper, Harland Sirius inline p/s wraparound labeler with hot stamp coder (Sancoa rotary p/s labeler avialalble at additional cost), PDC 65ER neck bander/sleever with heat tunnel and all interconnecting conveyor. Bundlers and cartoners available upon request.
Last running cough syrup. All 316 stainless steel contact parts, 1/4" positive cut off nozzles, no bottle/no fill, CIP system, 35 gallon jacketed pressure supply tank and electrically interlocked lexan guarding, with touch screen interface.

OAD: 98" L x 78" W x 102" H

More Photos: 2

Automatic, intermittent motion, horizontal f/f/s, and cartoner capable of speeds up to 60 ppm. depending on application. F/F/S machine has 14 stations, set on 7" centers, package size range of: 2" - 5 3/4" L x 2" - 9 1/2" H) with maximum thickness of 2". Auger powder filler, no pouch / no fill, dust collection hood, vacuum pick-off, digital temp controls, with safety guarding. Horizontal, cartoner H/M glue system, 2 chain unit set on 6" centers with 1 1/2" high square lugs, Carton range 2.5" x 5.13" L x 0.75" x 2.25" W x 3.38" x 8.25" D. Has a 8' L product infeed conveyor with 4 3/4" L x 3" W x 7/8" H fixed product buckets, blank carton magazine with a 2 suction cup, recipicating pic n place, single arm product ram, Nordson 2302 (2) gun H/M glue system, 20" L x 3" H carton compression section. with no product / no carton, both have Electro-cam PLS 6000 controller with touch pad and panel view.

OAD: 26" L x 65" W x 84" H

More Photos: 2

Automatic, intermittent motion, horizontal f/f/s, and cartoner capable of speeds up to 60 ppm. (depending on application). F/F/S machine has 14 stations, set on 7" centers, package size range of: (2" - 5 3/4" L) x (2" - 9 1/2" H) with a maximum thickness of 2". Auger powder filler, no pouch/no fill, dust collection hood, vacuum pick-off, digital temperature controls, and safety guarding. Cartoner, is a 2 chain unit set on 6" centers with 1 1/2" high square lugs, carton size range of: (1/2" - 2" L) x (3/4" - 3 1/2"W) x (1/2" - 3 1/2"D). Has a 7' L product infeed conveyor with (4 3/4" L x 3" W x 7/8 "H) fixed buckets,.8 station (4 1/2" L x 4" W x 24" H) rotary carousel, blank carton magazine, 1-cup pick & place, no product / no carton sensor, both have Electro-cam PLS 6000 controller with touch pad and panel view.

OAD: 27' 6" L x 55" W x 96" H

More Photos: 2

Complete powder filling line rated to 25-50 cpm depending on size of container and product. Line starts with a Terco 36" bottle unscrambler feeding into an All Fill single head auger filler then into a Kaps All model E capper to a Avery pressure sensative wrap around labeler and finally to a 36" Terco accumulator. Completely integrated line. OPTIONAL Enercon induction sealer available at an additional cost.

Complete powder filling line rated upto 50 cpm depending on size of container and product. Line starts with a Teco 48" bottle unscrambler with built in air cleaner, feeding into a All Fill single head auger filler, to a Resina F24 fitment applicator, to a Resina S-30 single head capper, to a PPS 5kw induction sealer, to a LabeleAire pressure sensitive spot labeler, completely intergrated line, last used for spice filling.

More Photos: 3

Complete, automatic, strip packaging and display hooded carton packaging line capable of up to 35 cartons per minute, or up to 2000 strip packs per minute. Has vertical strip packager with UV ink printer, hooded glue carton erector, vertical carton accumulator, triseal carton closer, and glue case erector / packer with carton collator. Strip Packs: 30mm x 30mm - 10 up, 30mm x 45mm - 10 up, 60mm x 50mm - 5 up, 62mm x 46mm - 5 up (current tooling). Cartons: (2 3/4" - 4 1/4")L x (1" - 8")W x up to 10"D. Cases: (2 1/2" - 13 1/2")L x (1" - 19")W x (1/2" - 12")H. Has Allen Bradley programmable controllers, lexan barrier guarding with electrical interlock.

OAD: 525"L x 332"W x 90"H
(43' 9"L x 27' 8" x 7' 6"H)
(OADs refers to original U-shaped line layout)

More Photos: 3

Automatic vial cleaning, filling, stoppering, aluminum capping line capable of speeds up to 50 vials @ min depending on application. Line consists of B & S FAW1002 rotary cleaner with siliconization station. B & S WDS 2000 inline 2 station weight dosing filler, stoppering machine and a B & S KS1010 aluminum capper. Has fill range from : 5g-1000g, container size range of 16 - 100mm dia, and is currently set for 100ml vial and has change parts available for 10, 20, 30, 50, 100, 250, 500ml (one set included with line). Will handle regular and slotted style stoppers with change parts available for 13, 20 or 28mm. and the aluminum capper has change parts available for 13, 20 or 28mm flip off caps. B & S PLC Control system, and last ran in class 100 hepa filter operation.

More Photos: 2

Complete Vial Line consisting of vial cleaning, sterilizing, filling, stoppering and aluminum capping rated to 60 vials per minute. Line consists of Groninger ASV100 rotary vial washer with siliconization option for insertion of stoppers. Groninger STS depyrogenation tunnel oven w/Hepa Filtration. Groninger KFVG monoblock filler stopper and aluminum capper. Has a container range: (height) 30 - 200MM (diameter) 10 - 100MM. Has a fill volume range: 3 - 270 ml w/correct change parts. Stopper range: 13 - 28MM and currently set up for regular and Lyo-stoppers for 13 or 20MM. Tray in feed to worm screw to star wheel indexing system. Bottom up fill, no container no fill and automatic rejection w/rejection conveyor for no stopper or no cap detection. Currently set up with two dosing stations, Set up to run 2, 5, 12, 25 and 50ml vials. Never used in Production!