Used Box Equipment
15 Cooler machines IN-STOCK!

More Photos: 2

20" Wide x 144" Long, stainless steel, mesh belt, cooling tunnel. Equipped with a 3/4 hp drive, 4" high guide rails, and a 5" wide x 10" long discharge. Mounted on a hollow stainless steel frame with height adjustable legs. Requires air handling package.

OAD: 144" L x 60" W x 42"H

More Photos: 4
Play Video

20" Wide x 144" Long, stainless steel, mesh belt, cooling tunnel. Equipped with a hooded top cover, 4" high product containment rails, and a 5" wide x 10" long discharge. Mounted on a hollow stainless steel frame with height adjustable legs. Requires air handling package. Air is blown down from on top of the conveyor and ehausted through ports below.

OAD: 144" L x 60" W x 88" H

More Photos: 2

30" Wide x 192" Long, stainless steel, cooling conveyor. Equipped with 1-1/2 hp blower package, variable speed controls, and bi-directional controls. Mounted on a stainless steel frame with height adjustable legs.

OAD: 192" L x 52" W x 60" H

More Photos: 4

Air cooled tunnel, designed to cool enrobed chocolates, as well as fat coatings. Modular design equipped with 236" (19.6 feet) long total, air tight tunnel area, polyurethane constructed, has removeable hoods that require no tooling or seals and maintain constant tempatures from entrance to exit with radiation air cooling from above and contact cooling from below. Suggested cooling temperatures chocolates 15 deg C and fat coatings 10 Deg C. and can handle up to a 24.8" wide product belt with refrigeration and evaporator units located in lower part of tunnel, compact drive section and control panel.

OAD: 284" L x 48" W x 45" H

More Photos: 3

Water cooled tunnel, designed to cool enrobed and center mass enrobbed chocolates. Modular design equipped with 513" (42.7 feet) long total air tight tunnel area, polyurethane constructed, has removeable hoods that require no tooling or seals, top and bottom cooling tubes positioned horizontally above product conveyor to maintain constant cooling temperatures from entrance to exit, with radiation water cooling from above and contact cooling from below. Adjustable temperatures from 6 to 12 Deg C. and can handle up to a 24.8" wide product belt, with heat exchanger, compressor, condenser, water circulation pump and evaporator units located in lower part of tunnel, compact drive section and control panel.

OAD: 640" L x 48" W x 47" H

More Photos: 2
Play Video

I & H, cooling tunnel four pass water spray cooling conveyor for cooling hot fill pouches. Equipped with four 30" wide interlocking conveyor. Each pass approximately 12' long with water spray from top and bottom of each pass with 6" clearance nozzles to belt. Pouches enter approximately 74" and discharge at approximately 31". Pouch clearance is 5"+.


OAD: 170" L x 75" W x 83" H

More Photos: 2

135"L x 72"W 3 Tier neoprene vibrating cooling conveyor. Each section is 115"L x 46.5" W with an adjustable height for the whole thing and each individual level. Has 5 fans, five separate belt sections, and a control panel with start/stop buttons for every level. Used with a hard candy processing and packaging line.

More Photos: 2

135"L x 72"W 3 Tier neoprene vibrating cooling conveyor. Equipped with five separate belt sections, five cooling fans and a control panel with start/stop buttons. Each section is 115"L x 46.5" W with an adjustable height for each individual level. Used with a hard candy processing and packaging line.

OAD: 135"

More Photos: 2

Stainlesss steel cooling tunnel equipped with variable speed 10' long by 8" wide conveyor, two - 5000 BTU AHAM certified air conditioners and tunnel opening of 14"W x 5"H. Discharge height at 32". Mounted on casters.

OAD: 130"L x 40" W x 64"H

More Photos: 1

Control panel for AEC units and equipped with a TCM cooling unit which is capable or 40 gallons per minute with 1" inlet and outlet process hoses and 1/2" cooling inlet and outlet hoses.

OAD: 60"L x 54"W x 92"H

More Photos: 4

(5) pass, 15" wide by 40' long with 6" clearance cooling conveyer and has a Bohn HCL14FC air handling unit. Equipped with 14 sq ft of cold face refrigeration area all stainless steel contact parts and is over / under bypass unit completely enclosed. 5 section stacked with (2) 237" (2) 227" and (1) 219" L x 15" W and (3) section stacked with (2) 237" (1) 227" x 15" W inner chamber conveyor sections, with (5) 13-1/4" W sections of white flex-link belt conveyor. Last running in gum operation.

More Photos: 2

PART OF COMPLETE LINE
Ambient air cooling tunnel, has a 60" wide x 12' L cooling chamber, has all stainless steel contact parts has a 60" wide flat wire product conveyor belt that runs completely thru chamber, with a 60" wide product in feed that tapers down to 34" wide x 39" high product discharge. Last running in a corn tortilla chips.

OAD: 13' L x 7' W x 6' 6"H

More Photos: 4

24" Wide belt x 86' Long cooling conveyor consisting of Eleven 94" long sections. Product clearance: 7 1/2" Discharging height: 34". Four sections are equipped with 7 1/2HP blowers.

OAD: 86' L x 66" W x 54" H

More Photos: 2

S/S Continuous flow cooling conveyor 32" wide by 136" long with 4 1/2" high side rails, and 42" discharge height .Unit has two 5-3/4" ID sanitary ports, one 1-1/4" ID sanitary port and one 24" x 17-1/2" port. and 42" discharge height Equipped with a 20" ID cool air intake and a 20" air exhaust, a comb-style product disperser bar with 1-1/4" clearance above conveyor and two product laning bars mounted 3/4" above conveyor.

OAD: 163"(L) x 76"(W) x 66"(H)

More Photos: 2

Stainless steel cooling conveyor 34" wide by 20' long. Designed for use with chilled glycol water for air temperatures from 40-50 deg. Fahrenheit. Adjustable height guard on top of conveyor.
Requires independent chiller.

OAD: 228" (L) x 70" (W) x 80" (H)