Used Fluid Bed Equipment
18 Dryer machines IN-STOCK!

More Photos: 4

9 liter, benchtop, vertical manifold style freeze dryer. Equipped with a 12" diameter x 6" deep coiled chamber, 12 port stainless steel vertical manifold,

More Photos: 3

Vacuum shelf dryer with 92.6 sq.ft. of shelf drying area. Capable of absolute pressure down to 0.23 psi. Chamber dimensions: 40-1/2" in Width; 49" in Depth; 35" in Height. Equipped with nine internally heated 39-1/4" x 42-1/2" shelves with 2-1/2" gap between shelves, two 6" diameter sight glasses, vacuum pump, vacuum gauge, vacuum release valve and controllers for temperature and vacuum. Temperature range between cold water supply and 100C. Stainless steel chamber and shelves.

OAD: 98"L x 60"W x 78"H

More Photos: 4

Vibratory dryer S/S wetted parts construction, S/S hood w/ easy open clamps & easy open door. Dryer features 18" wide x 72" long ss perforated screen w/ 1/8" holes on 1/2 in centers, in chamber up to 6" deep, adjustabe weir gate to control flow rate from dryer bed to discharge. 8" plain pipe product infeed connection, 5" plain pipe product discharge connection, 16" x 18" oval air inlet, qty 2 x 12" round air discharge ports in hood, 3" dia clean out in base. Motor and base are coil spring mounted. Includes 36" pedestals for floor mounting.
Stroke = 3/16" / RPM = 828 / Bed= 24" W x 10' 6" L

OAD = 140" L x 45" W x 84" H

More Photos: 4

Batch style fluid bed dryer / granulator system consisting of main tower assembly, air discharge bag filtration system, air handling unit with HEPA filtration, roof top blower and associated control cabinets. Warm filtered air is drawn in from the bottom of the tower crossing the air slit between rotor disc and product container, creating a whirling effect. This air flow, along with the rotation of the disc, result in a doughnut like movement of the product providing uniform exposure of air to particle surface. Injecting liquids through the spray nozzle during this process allows for granulation of the particles. The bag type filter system at the air outlet retains the suspended particles. 304 Stainless steel contact parts with polished interior.

Capacity: 5 to 40 Kg Dry (11 to 88 Lb)
Maximum working volume: 60 Liters
Temperature range: -10 to 60 Celsius
Total heating capacity: 50 kW
Maximum air volume: 1500 cubic meters/hr
(52,972 cubic feet/hr)
Steam consumption: 80 kg/hr (176 lb / hr)
Compressed air Consumption: 45 cubic meters/hr
(1589 Cubic feet/hr)
OAD of Main Tower = 56" w x 70" L x 125' H

More Photos: 2

Column & Bowl ONLY, No controls/No Air handling
Stainless steel Wurster coating system. Features 46" diameter x 68"H coating chamber. Has seven nozzles and seven 9-inch partitions (for applying coating solution in the direction of flow of the substrate), and 32"H conical deceleration zone above the coating chamber (known as an expansion chamber) with screen. Equipped with 10" diameter discharge valve, hydraulic cylinder for discharge chute, side view ports, and stainless steel frame with 10" diameter casters.

OAD: 87"L x 79"W x 84"H

More Photos: 2

Column & Bowl ONLY, No controls/No Air handling
Stainless steel Wurster coating system. Features 46" diameter x 68"H coating chamber. Has seven nozzles and seven 9-inch partitions (for applying coating solution in the direction of flow of the substrate), and 63"H conical deceleration zone above the coating chamber (known as an expansion chamber). Equipped with 10" diameter discharge valve, hydraulic cylinder for discharge chute, side view ports, and stainless steel frame with 10" diameter casters.
Requires control system and air handling system per installation, not included.

OAD: 87"L x 79"W x 84"H

More Photos: 2

310 Liter or 11 cu ft stainless steel fluid bed dryer, recommended batch weights 190-470 lb, or 86-214 KG. Fan rate 2200 cfm. Drying is achieved in a FitzAire sytstem as gas flows upward through the solids in the container. Gas is pulled through the bed, partially suspending the particles in the gas stream in a random, boiling motion. Drying occus as moisture is transferred from the particles to the fluidizing gas. Has one bowl and cart and second available at additional cost.

More Photos: 2

170 sq ft (usable space) Stainless Steel Freeze Dryer with hydraulic internal stoppering. Chamber and shelf material are 304 s/s. Chamber rated for 15PSI and FV at 650 deg F . Chamber size: 48"W x 44"H x 55"D. 100 Liter Ice condenser capacity. Has 30 HP Dunn and Bush compressor w/back up compressor, stokes 212H vacuum pumps w/roots type blowers. Number of shelves: 12 usable (13 total) with 4.5" shelf clearance. Shelf size is 41" x 50" deep. Has top down and bottom up hydraulic stoppering. Shelf temp range: -50 deg C to + 70 Deg F. Shelf fluid heater 50KW. Has skid mounted compressors and vacuum pumps. Has relay logic control package. FV.15 @ 650deg. F Door thickness 1.875 National Board#296 Condenser Serial # 71V-2459-2 FV.15@350deg.FSH.375,HD.375 Door thickness.750
National Board#297. Weight of System is 45,000 LBs

Chamber measures: 76" x 73" x 101" high
Refrigeration skid: 83" x 109" x 103" high

More Photos: 4

Glatt CPCG 120 Powder Coater w/32" dia. Wurster. The fluidized bed filmcoating system is especially designed for the coating of oval tablets, pellets, and similar products. During the suspension and drying phases, the required air is sucked through the machine from the outside by the outlet (exhaust) air fan unit. There is a pre-filter to clean the air and a heater element that preconditions the air to be used in the process. Product movement within the product container is achieved by the air introduced in connection with the perforated base of the product container and ascending pipe. Spray liquid is introduced into the turbulent zone.
(where product is in a ascending stage). Unit includes 3 Glatt model 940/7-1-S25 spray knozzles/WSG series, top spray nozzles. Spray quanity is largely dependent on fluid viscosity. SPECIFICATIONS: 420 Ltr Bowl Cap.
600,000 BTU heating cap. 70d C. rise over inlet air at median air throughput. Maximum Steam consumption is 750 lbs/hr. This unit has horizonal explosion relief.
Last used in animal health industry.

More Photos: 2

Model 220FS300-HCO - 220 sq ft unit with shelves and internal ice condenser has 300 liter ice capacity. 11 useable Heresite coated shelves, 60" x 48" and 4 1/2" clearance. Includes skid mounted refrigeration package with (2) Stokes 7.5 Hp vacuum pumps and Dunham Bush 2 stage 30 Hp compressor (1) 7.5 Hp Hydraulic pump has internal hydraulic stoppering capabilities and chamber suited for vacuum and atmospheric pressure only. Approximate weights: Chamber 22,000 Lbs, Vacuum package: 1,000 lbs, Control panel: 400 lbs, Refrigeration package: 10,500 lbs.

OAD: Chamber: 102" L x 95" D x 102" H
OAD: Refrigeration: 66" L x 138" D x 102" H

More Photos: 2

Stokes Model 72 freeze dryer with seven usable shelves comprising 84 sq. ft. surface area with a 3.5" space between shelves. Shelf temperature between -40 F to 180 F with a chill down from 75 F to -40 F in 1.5 hours. Skid mounted external condenser with four plate, 50 square foot, with 100 liter load capacity at 20 mm ice thickness and a baffled interior to ensure even ice distribution. Refrigeration features a York two Stage 20 Hp motor with Freon 502 refrigerant and a Copeland Semi hermetic 3 HP auxiliary chilling system. Honeywell chart recorder, vacuum pressure gauge, vacuum pressure recorder, shelf and condenser temperature controller and an Autolyophile AL-101 PLC controls. 304 Stainless steel with a #4 finish. Unit REQUIRES CONTROL PACKAGE.

OAD: 84"W x 114"L x 93"H (Chamber unit)
OAD: 94"W x 82"L x 81"H (Condenser unit).

Stainless Steel fluid bed dryer rated to 300 Kilos per hour . Equipped with two product bowls measuring 66-1/2" diameter x 22" deep. Control panel and s/s chamber (without spray system). External steam coil, blower driven by 40 HP motor.

More Photos: 2

Model 005 (2kg/5 liter) Fluid Bed Dryer/Granulator was used a pilot dryer for 100 liter production dryer. This is pilot scale fluid air granulator is equipped with Magnaflow filter chamber.

Requires controls that are now imbedded with 100 ltr dryer panel, consisting of Factrol automatic programmable microprocessor to control operating temperature, gas flow and spray rates.

4 Square foot working capacity. Two 12" x 24" shelves with 5-1/2" clearance. Equipped with bottom-up hydraulic stoppering, internal condenser, through the door Gassing, 1/2-Hp vacuum pump, 6 liter ice capacity. Steam sterilizable.

OAD: 46"Wide x 99" Deep x 76" High.

304 S/S Pre dryer freezer with 270 sq ft shelf area. selves: 15 at 39" x 76" x 4-1/2". Temperature range: to -60 Degrees C. Chamber measures 48" X 83" X 81". Dunn & Bush 30 Hp 2 Stage refrigeration compressor.

OAD: 16' L x 4'4" W x 8' H

Self Contained Lab Size Freeze Dryer Has A Condensate Capacity Of 24 Liters And A 506 Sq In Cold Surface Area. Has Cascade Refrigeration: 40"L X 24"W X 36"H Cabinet Houses Two 1/2 Hp Compressores In Series For Condensor Temperatures To -85 Deg C. Equipped W/18 Port Manifold With 3/4" Valves, Panel Mounted Thermister Temperature Indicator -85 To 25 Deg C And Thermocouple Vacuum Gauge, 0-2000 Microns.

Lab size freeze dryer, 2.75 sq ft with Internal air bladder stoppering. Has 2 heresite trays 11 3/4" W x 17" L with 1 1/2" clearance, shelf and condensor temperatures are continuously monitored, and has a shelf range of -60 C to +100 C , and a condensor range of -80 C to +30 C. Enclosed stainless steel cabinet Measuring 20" Dia x 19" Deep. and has a ice capacity of 15 lbs or 8 litres.

OAD: 27" L x 42" W x 62" H

More Photos: 1

Glatt 'Uni-Glatt' lab size fluid bed dryer capable of drying, mixing and coating tablets, hard/soft gel capsules, metal beads & seeds as per the fluidized bed system from .5 to 3.0kg. Uses 4 x 440 kW of heat, 144 cfm fan and has a 4" discharge. Available with the WSG Drying Column or Wurster Liquid spray column. System can dry conventional granules, powders & crystalline substances. Unit mounted on s/s base w/casters.

OAD: 28" (L) x 26" (W) x 56" (H)