Used Cartridge Equipment
34 Dust Collector machines IN-STOCK!

More Photos: 4

Torit VS2400, Vibra Shake, cartridge dust collector rated up to 2400 cfm - depending on materials and application. Filter Dimensions: 16.6" in Diameter; 20" in Length. Filter Area: 270 ft². Cabinet Size: 29.5 ft³. Dust Storage Area: 8.5 ft³. Equipped with an 8" diameter inlet, 5 hp blower drive, and a 12" x 12" flanged center bottom discharge.

OAD: 60" L x 36" W x 156" H

More Photos: 4

Hoffman Stationary Self-Contained Industrial Vacuum System, model T-VAC-501-S1, carbon steel. Consists of (1) Hoffman T-Series exhauster, model T1A05, driven by a 5 hp, 3/60/230/460 volt, 3470 rpm motor. (1) Manual shake dust collector with 7 bags providing approximately 35 square feet filter area. Mounted on a carbon steel frame.

More Photos: 4

Wet and dry, single bag, central air system filtration system capable of handling up to 8 work stations and can be installed with remote sensors to allow vacuum to electronically regulate air flow. Equipped with, automatic filter cleaning system with compressed air, easy-release 19" diameter x 40" high stainless steel, debris container with 3-1/2" inlet port and one containment bag, mounted on large swivel wheels. Technical Data: 69 db (A) sound level, 5 Hp motor, 260 cfm airflow and 90" static water lift.

OAD: 44" L x 36" W x 54" H

More Photos: 4

More Photos: 4

4 cartridge, down flow dust collector with 7.5 hp motor drive rated from 900 to 1550 clean air flow with static pressure from 8.2 to 10.6 wg. Equipped with 5" Diameter side inlet port and 7'' Diameter top clean air exhaust port. (4) 9'' in Diameter filter cartridges, with up to 412 (ft²) filter area with the standard Ultra-Web II cartridges, built in fan with silencing system and dust collection drawer, with 1.3 cu ft dust capacity. Torit Checker Board touch pad controller with display for pressure drop, airflow and diagnostic data.

OAD: 44" L x 37" W x 77" H

More Photos: 4

More Photos: 2

4 Cartridge, downflow, self contained, dust collector rated up to 1,000 cfm - depending on materials and application. Static pressure: up to 9.7 wg. Equipped with a 7'' diameter inlet hose, 9'' diameter cartridges, 1.3 ft³ dust drawer, 5 hp Baldor blower, 17'' long x 9" wide outlet.

OAD: 47" L x 40" W x 96" H

More Photos: 2

High Efficiency, stainless steel, submerged split orifice dust collector rated at 1800 cfm. Temperature rating: up to 180° F. Efficiency rating: 95% @ 2 microns; up to 99% on larger particles - depending on materials and application. Equipped with a 9" ID / 12" OD flanged inlet, bolt down covers, level gauge, 11" ID / 14" OD flanged outlet, and a 3" diameter threaded drain. Mounted on casters. Requires air system.

OAD: 72" L x 46" W x 82" H

More Photos: 2

Cabinet style, self contained dust collecot rated from 175 to 550 scfm - depending on materials and application. Filter cloth area: 75 ft². Storage capacity: 1.1 ft³. Efficiency: 99.9%. External static pressure: 4.9 to 5.4 wg. Pressure drop: 0.15 to .72 wg. Equipped with a 3" diameter inlet.

OAD: 28" L x 28" W x 60" H

More Photos: 2

3 Bag, stainless steel, dust collector. Equipped with a 12" diameter inlet, 7.5 hp blower, and a 12" diameter discharge port.

OAD: 40" L x 57" W x 94" H

More Photos: 2

6" Diameter x 180" long, extension arm for a dust collection system. Equipped with a 13" OD inlet, three flexible joints, and a pneumatic slide gate.

OAD: 180" L x 20" W x 20" H

More Photos: 2

6" Diameter x 180" long, extension arm for a dust collection system. Equipped with a 13" OD inlet, three flexible joints, and a pneumatic slide gate.

OAD: 180" L x 20" W x 20" H

More Photos: 2

6" Diameter x 180" long, extension arm for a dust collection system. Equipped with a 13" OD inlet, three flexible joints, and a pneumatic slide gate.

OAD: 180" L x 20" W x 20" H

More Photos: 2

6" Diameter x 180" long, extension arm for a dust collection system. Equipped with a 13" OD inlet, three flexible joints, and a pneumatic slide gate.

OAD: 180" L x 20" W x 20" H

More Photos: 3

Cabinet style, self contained, dust collector rated between 175 - 550 cfm depending on application. Unit has 120 ft² of filter cloth area, 1.1 ft³ dust storage capacity, 99.9% collection efficiency, 4.70 - 5.40 wg external static pressure, 3571 - 6322 fpm velocity, 1 hp drive, and a 3" dia inlet.

OAD: 30"L x 25"W x 72"H

More Photos: 2

28 bag in plant dust collector rated up to 500 cfm. Unit has 60ft² of filter cloth area, 99.9% collection efficiency, easy clean filters, 3/4 hp drive, and a 7" dia top mounted air inlet.

OAD: 28"L x 28"W x 68"H

More Photos: 2

84 Cartridge, down flow, self contained dust collector rated up to 1,500 scfm - depending on materials and application. Efficency: 99.99%. Equipped with a 32" x 16" outer dimension 28" x 12" inner dimension flanged inlet, eighty four 5" diameter x 84" long cartridges, 84" tall chamber with four swing open doors, and a 23" OD / 20" ID discharge.

OAD: 96" L x 88" W x 172" H

More Photos: 1

Bag dust collector with 225 sq. ft. of filter area. Has (52) 4"dia x 48"L filter bags, air pulse jet dust removal, 7" dia air outfeed, 5" dia air infeed, 20"W x 41"H confined access door, and vibratory funnel to remove collected dust with 9 1/2"diameter discharge at 39"H.

OAD: 65"L x 63"W x 91"H

More Photos: 3

2 section, pulse jet, bag house dust collector, all welded 12 gauge construction with 1,231 sq ft each section or 2,462 sq ft total filter area, rated from 10,000 - 12,000 cfm. Has (9) high pressure air supply valves, bolt down access door, 100 (10 x 10 pattern) 4" OD, 3" ID filter ports, with cone shaped hoppers on leg supports. with 16" dia side product inlet and 14" dia bottom product outlet with 48" floor clearance each section, with 40 Hp blower anmd is self cleaning and was designed for continuous flow.

OAD: 144" L x 85" W 245" H

More Photos: 2

WRITE-UP-IN-PROGRESS
Pulse jet style dust collector, air filtration system rated to cfm, has sq ft of cloth area. 42" Diameter x 69" Long outside bag housing with ( ) " diameter x " long filtration bags. Equipped with top 16-1/4" OD, 13-3/4" ID flanged top port with 16-1/4" OD, 13-3/4" ID flanged side discharge port and 2 top side air manifolds with 5 air valves. 40" L x 24" W OD 31"L x 17" W ID flanged side service door. 34" long cone bottom with 5-1/2 ID inlet port and 11-1/4" OD, 8-3/4" ID flanged bottom discharge port

OAD: 68" L x 60" W x 108" H

More Photos: 2

Self Cleaner equipped with a blower rated @ 160 scfm @ 40"WC, 7 gal compressed air tank w/ filter and regulator, heavy-duty rubber vibration isolators. Unit comes equipped with a dust cart, hopper (16"L x 16"W x 16"H) and stand.

OAD: 36"L x 42"W x 88"H

More Photos: 1

Three bag dust collector with 20 sq.ft. of filter area. Has 1 7/8" diameter inlet, 5 1/2" diameter oulet, Allen Bradley push button controls, dust collection pan, and pneumatic tamper to shake dust from filters. Powered by 1-1/2 hp motor. Mounted on casters.

OAD: 35"L x 25"W x 87"H

More Photos: 1

Bag-type dust collector with 100 sq. ft. of filter area. Features four 1 1/2" diameter inlet/outlets, and dust collection pan. Equipped with 15 bags, and a manual dust shaker handle. Powered by a 1 hp motor.

OAD: 28"L x 28"W x 60"H

Three bag dust collector with 20 sq.ft. of filter area. Has 1 7/8" diameter inlet, 5 1/2" diameter oulet, Allen Bradley push button controls, dust collection pan, and pneumatic tamper to shake dust from filters. Mounted on casters.

OAD: 35"L x 25"W x 87"H

More Photos: 2

Dust collector with (25) 5" diameter x 50"(H) cloth bags for a total of 170 sqft. of collection surface. Equipped with 8"(W) x 3 1/2"(H) air inlet, 28" x 24" x 16" collection pan, 2HP Baldor motor, and bag shake lever. Mounted on a painted steel frame.

OAD: 35"(L) x 31"(W) x 94"(H)

More Photos: 1

Model 64 cabinet series dust collector equipped with 24 filter bags (with filter dimensions of 18 3/4" x 10 1/2"). Equipped with a 3/4 hp motor, 6" x 12" top vent, 3" top mounted air inlet & starter and on off switch.

OAD: 26"L x 24"W x 50"H

More Photos: 2

Air filter with (9) 8" diameter x 60"long cloth bags for a total of 88 sq. ft. Unit features a reverse air pulse cleaning system which flexes bags to dislodge accumulated dust. Equipped with a 14" OD flanged inlet, 10" x 10" flanged discharge, 4" ID clean air outlet, and 30" x 18" entry door.

OAD: 34"(L) x 34"(W) x 84"(H)

Unit has a filter area of 7.5 Sq. ft. & is equipped with a pneumatic pulse jet system for continuous automatic bag cleaning, tubesheet, bag housing, pyramid hopper with a 6" ID dusty air inlet and a 9-1/2" X 11" material discharge opening with an 13-3/4" X 15" OD flange, a 5"ID clean air outlet, compressed air valves and timer and a quick access door. Unit also equipped with a fan/suction dnit. Last running in a food operation. (OAD: 32"L x 40"Wx 60"H).

More Photos: 4

Torit / Donaldson Model DFT2-4 (4) cartridge, down flow dust collector with 500 to 3,150 clean air flow. Equipped with 10-1/2" OD x 8" ID flanged top side inlet port and 10-1/2'' OD x 8" ID side bottom flanged clean air exhaust port. (4) 14'' in Diameter filter cartridges, with up to 760 (ft²) filter area with the standard Ultra-Web II cartridges, built in fan with silencing system and 14" OD bottom product outlet with 14" floor clearance. New York Blower Series 20-GI size 144LS centrifugal fan with 8" x 8" centrifugal inlet port and side 9" OD exhaust port.

OAD: 70" L x 56" W x 87" H Dust Collector
54" L x 20" W x 30" H Blower

More Photos: 4

Torit DF 2DF16, 16 Cartridge, Down flow, dust collector rated up to 12,600 cfm - depending on materials and application. Filter Area: 3,040 ft². Equipped with two 12" diameter inlets, 16" x 48" side access, eight vales, radial paddle blower, and two 14" diameter discharges with 30" of ground clearance. Mounted on height adjustable legs.

OAD: 84" L x 96" W x 128" H