Used Plastic Equipment
12 Extruder machines IN-STOCK!

More Photos: 4

Extruder knife cut-off with housing for 4" OD extruder. Equipped with 10-3/4" OD, 8-3/4" ID flanged mounting with (6) 1/2" bolt holes on 5" centers with dual 5" long rotary knife cut-offs attached to the variable speed motor drive with output of 1175 rpm maximum and 117 rpm minimum and gear ratio of 4.1-1.

OAD: 26" L x 19" W x 18" H

More Photos: 2

WRITE-UP-IN-PROGRESS
Variable speed Counter Rotating twin screw extruder. Equipped with two screws measuring ___mm (_.___") wide x ____mm (___") long. Features product infeed hopper into a _"L x _"W feed throat, five electrical heating zones, dual cooling zones into a heated transition head with a __mm x ___mm opening. Unit has L/D ratio of __, __ rpm max shaft speed and vari speed drive.

OAD: ___" L x __" W x __" H

Variable speed counter rotating twin screw extruder. Equipped with two screws measuring 100mm (3.937") wide x 3556mm (140") long. Features product infeed hopper into a 5"L x 5"W feed throat, five electrical heating zones, dual cooling zones into a heated transition head with a 60mm x 550mm opening. Unit has L/D ratio of 14, 60 rpm max shaft speed and vari speed drive.

More Photos: 2

Variable speed counter rotating twin screw extruder. Equipped with two screws measuring 100mm (3.937") wide x 3556mm (140") long. Features product infeed hopper into a 5"L x 5"W feed throat, five electrical heating zones, dual cooling zones into a heated transition head with a 60mm x 550mm opening. Unit has L/D ratio of 14, 60 rpm max shaft speed and vari speed drive.

OAD: 150" L x 32" W x 74" H

More Photos: 2

Placo, Model EX-75, 3 zone, plastic extruder, capable of productions rates up to 130 kg per hour - depending on materials and application. Equipped with 3" diameter screw and has 3 oil heated barrel sections, 3 cooling points, with controllers, variable speed direct current drive, speed and feedback controls, wirh L:D ratio of 20:1 and is commonly used for plastic melt and injection molding operations.

OAD: 108" L x 70" W x 84" H

More Photos: 3

High capacity, steam jacketed, single screw extruder, capable of 1,000 lbs "PLUS" an hour production on granular type products like grain and meal - depending on size, shape and density. Equipped with 5-1/2" diameter x 24" long carbon steel 3 head extruder barrel, steam jacketed, with Trerice 100 psi pressure guage. The X25S is equipped with 100 Hp 8 belt motor drive, 115 litre stainless steel product hopper, Syntron vibratory feeder with vari-speed controller, 3 blade circular knife for product sizing with 2 Hp variable speed drive and 81" long x 9-1/2" wide stainless steel mess conveyor feed belt for sized product with 36" discharge height and 3/4 Hp drive. Last running cheese ball, and cheese puffs.

Extruder OAD: 68" L x 75" W x 102"H
Sizer OAD: 71" L x 36" W x 54" H
Feed Belt OAD: 91" L x 26" W x 47" H

More Photos: 3

High capacity, steam jacketed, single screw extruder, capable of 1,000 lbs "PLUS" an hour production on granular type products like grain and meal - depending on size, shape and density. Equipped with 5-1/2" diameter x 24" long carbon steel 3 head extruder barrel, steam jacketed, with Trerice 100 psi pressure guage. The X25S is equipped with 100 Hp 8 belt motor drive, 115 litre stainless steel product hopper, Syntron vibratory feeder with vari-speed controller, 3 blade circular knife for product sizing with 2 Hp variable speed drive, and 81" long x 9-1/2" wide stainless steel mess conveyor feed belt for sized product with 36" discharge height and 3/4 Hp drive. Last running cheese ball, and cheese puffs.

Extruder OAD: 68" L x 78" W x 98"H
Sizer OAD: 71" L x 36" W x 41" H
Feed Belt OAD: 82" L x 24" W x 44" H

More Photos: 2
Play Video

Single screw extruder will continuously cook up to 1,000 Lbs/Hr of grain & cereal based products depending on size, shape, & density required. Extruder is a 3.25"dia x 30" length w/ 6 heads (barrels), jacketed for hot water. System consists of Accurate 1-1/2 screw feeder to a Wenger dual 6" dia x 30"L SS conditioner w/ 1.5 HP drive, . Also has a Toshiba AC frequency inverter. Ideal barrel size for starch base products like cereal. Last running rice/soy product.

More Photos: 3

Co-rotating Twin screw, 57mm carbon steel compounding extruder with optional high tourque drive capable of a throughput rate of up to 350 kg (700 lbs)/hour depending on the product and process. The extruder, features 9 jacketed barrels, 7" Long sections for heating and cooling, 3.5" diameter feed area with another infeed area of 28" down stream from the first. Includes 6 extra barrel sections 1 of which is a top / side feeding section, with powered flying knife cutoff assembly and die plate holder. Requires controls package and has a L to D ratio 34:1 Ratio

OAD: (L) 186" x (W) 40" x (H) 78"

More Photos: 2

Stainless steel, low pressure, continuous motion, batch extruder. Equipped with a 6" Diameter x 24" Long interrupted mixing screw, vari-speed drive with capacites up to 500 cu ft per hour and residence times of 15 second to 5 minutes wirth controlled continuous mixing through intermediate orifice plates and is mounted on stainless steel base with casters.

OAD: 68" L x 40" W x 54" H

More Photos: 4
Play Video

Single screw extruder rated up to 120 lbs per hour - depending on materials and application. Equipped with 100% jacketed for both water or steam with temperature range of -85 deg F up to 550 deg F and temperture is precisely controlled in each zone of hollow sectionalized jacketed barrels with a 2-1/2" diameter screw. The liners are made of hardened stainless steel with all smooth interiors. Variable speed with extrusion pressures ranging from 100 psi up to 5,000 psi. This is a cooking extruder which continuously cooks pre-mixed, semi moist and moist materials.

OAD: 87" L x 41" W x 48" H

More Photos: 2
Play Video

Variable speed, 5 zone extruder with a 28:1 ratio. Equipped with a stainless steel product hopper, flanged product in feed port, 1-1/4" diameter x 36" long S/S screw. Each zone is electrically heated and individual controlled with a temperature range to 800 degree F. Screw speed is adjustable to 125 RPM. Caster base. Last used in a home care products application. Currently equipped with a "string die" discharge.

OAD: 60" L x 36" W x 40" H

More Photos: 2

Variable speed, counter rotating, twin screw extruder. Equipped with two 1.5" diameter x 16" long rotary screws, two variable temperature controllers, and push button controls. Mounted on casters.

OAD: 57" L x 25" W x 53"H