Used Can Piston Equipment
29 Filler Can machines IN-STOCK!

More Photos: 3

Incline cleated feeder, has a 96" L x 22" W x 48" D product hopper with 26-3/4" W rubber belt conveyor, to 158" L x 26-3/4" W inclined plastic belt conveyor, with (2) 8" L x 3-3/4" H plastic cleats, on 12" centers and has a 64" sloped discharge section, feeding to a 90" L x 84" W x 36" straight wall hopper, with a 42" L conical sloped bottom to a 60" L x 24" W rubber discharge conveyor. Last feeding 4 litre square f style plastic container to a bottle orientator.

OAD:

More Photos: 2

Automatic, 12 head rotary, piston filler capable of speeds from 80 - 300 cpm depending on size container and fill. Can handle containers from 202 - 404 Dia x 101 - 700 H and fill range from 3.85 - 50.11 fluid oz. Has (12) 4 1/8" pistons, set on 8" centers, with min / max piston stroke of 1/2" - 6 3/4" 1 3/4" OD and 1/2" ID filling nozzles, and a 24 gallon working capacity product bowl. 38" L x 4 1/2" W plastic delron product infeed conveyor with worm screw to star wheel container handling, no container / no-fill, and control panel with start / stop buttons and e-stop.

OAD: 78" L x 56" W x 72" H

More Photos: 3

18 head rotary, piston filler capable of speeds up to 180 cpm - depending on application. Can handle containers from 404 - 610 Dia including #10 cans and "F" style plastic containers, with a fill range from 40 - 160 fluid oz and accuries of + / - 0.25 oz. depending on product. Has (18) 7" ID x 9" L pistons, on 11" centers, with 2" OD and 1 1/2" ID filling nozzles, and a 208 gallon working capacity product bowl. 96" L x 4 1/2" W S/S delron product infeed conveyor with 30" L worm screw to star wheel container handling, no container / no-fill, 108" L x 4 1/2" W S/S delron conveyor from machine to a 122" L x 4 1/2" W plastic delron discharge conveyor with control panel with start / stop buttons and e-stop.

OAD: 104" L x 230" W x 87" H

More Photos: 3

40 Pocket rotary, continous motion, volumetric filler capable of speeds up to 400 cpm - depending on materials and application. Volume of fill is determined by diameter and height of the product pockets (which are change parts) currently set with (40) 1-1/4" diameter x 4" deep product pockets, all stainless steel construction, equipped with 54" L product worm screw container infeed, 4 pocket exposed product load area, with optional water nozzle product assist fill system (for sticker products) and level wipers. PLC, with control panel, has start, stop, jog, conveyor and volume, control buttons with e-stop, and colored status light bar. Can handle products like diced meat, vegetables, fruits, grainulars, etc. and was Last filling 4-1/2 oz glass baby food jars with fruits, vegtables and meats at rates from 200 - 400 cpm.

OAD: 96" L x 55" W x 78" H

More Photos: 2

Automatic, 16 head, rotary, piston filler capable of filling up to 240 containers per minute. Containers: up to 5" diameter x up to 12"H. Currently equipped with 2.5oz pistons. wormscrew to starwheel infeed, starwheel discharge, 6"W x 5 1/2"D platforms, 1/4" diameter fill nozzles, 50 gallon product tank with float valve, 3" diameter tri-clover product inlet, E-stop, hand crank volume adjustment for all pistons, volume adjustments for individual pistons, neck centering guides, and no container / no fill. Mounted on frame with height adjustable feet and stainless steel guarding.
With proper change parts, fill volume up to 35oz.
OAD: 60"L x 84"W x 84"H

More Photos: 2

Automatic, 16-head rotary, piston filler capable of up to 240 fills per minute. Currently equipped with 2.5oz pistons. Containers: up to 5" diameter x up to 12"H. Has 3 1/2"W conveyor frame, worm screw to star wheel in feed, star wheel discharge, 50 gallon product tank, neck centering guides, 3/8" diameter nozzles, fill accuracy +/- 0.5% by volume, mechanical container height adjustment, no container / no fill, gauges for changeover, and barrier guarding with electrical interlock.

OAD: 92"L x 68"W x 90"H

Fills: up to 35 oz (with proper change parts).

More Photos: 4

Automatic, 28-head rotary, piston can filler capable of 300 to 800 cans per minute. Currently equipped with 12 oz pistons. Cans: 202 to 404 diameter x up to 506. Has 5" centers, 88 gallon filler bowl, 60"L x 4 1/2"W in feed conveyor, worm screw to star wheel in feed, 16mm diameter drum valve opening, no container / no fill, and accurate to +/- 0.1 fluid ounce. Mounted on steel-it frame. Last running 211 x 400 can (10.94 oz fill).

OAD: 97"L x 79"W x 78"H

More Photos: 3

Automatic, continuous motion, S/S, 30 head rotary liquid filler capable of speeds to 500 cpm (depending on product). Has 9.5 oz pistons set on 5 3/4" centers w/ drum valves (for heavy particulates) and 1/2" ID nozzles. Equipped with timing screw to starwheel wheel infeed, starwheel discharge, no can/no fill, and handcrank adjustment for fill size. Unit mounted on mild steel frame. Last running 2 1/2" dia. x 3"(H) containers.

OAD: 80"(L) x 122"(W) x 75"(H)

More Photos: 4

Automatic, 10 head rotary, stainless steel, piston filler rated to 300 containers per minute - depending on materials and application. Size range: 202 to 404 in Diameter; 101 to 700 in Height. Fill range: up to 40 ounces. Equipped with screw to star wheel infeed, 7/8"outer diameter (3/8" inner diameter) nozzles set on 6-1/2" centers, no container / no fill feature, star discharge. Change parts required to accomodate size range.
(Currently equipped with ten 40oz pistons, 3-1/2" ID x 15-1/2" H. Unit accepts pistons up to 52 oz.)

OAD: 106" L x 54" W x 83" H






.

More Photos: 2

Fully automatic 14 head rotary piston filler capable of speeds up to 400 containers per minute. Can fill cans from 202 to 404 in diameter with a maximum fill capacity of 52 fluid oz. Currently set to fill a 300 (dia) can with a 1" (dia) fill nozzle. Equipped with stainless steel contact parts, worm screw infeed to star wheel, a 25 gallon product storage hopper, chain drive and is mounted on (4) stainless steel pipe legs.
OAD: 56" (L) x 42" (W) x 72" (H)

More Photos: 4

9 head rotary, S/S piston filler capable of speeds up to 75 cpm - depending on application. All S/S contact parts has 9 filling heads set on 8-1/2" centers with 3/8" OD, 1/8" ID S/S nozzles, (9) 7" Dia x 7" L pistons, fills to 128 ozs, with accuracies of 0.1 fluid oz and containers to 603 Dia x 12" H, with proper change parts. Has 5" L x 8" W bottom up fill container pedestals and container grippers no container / no fill, S/S drip pan, 72" L x 4 1/2" W plastic delrin container conveyor with 36" L worm screw in feed and container guide rails, control panel with run / jog switch and e-stop. The PB series is for narrow neck, blow molded plastic containers and was last set for 32 oz square plastic container.

OAD: 112" L x 72" W x 96" H

More Photos: 2

Automatic 8 head rotary piston filler capable of speeds up to 120 CPM (depending on product and fill volume). Currently set up with 2.5 oz pistons. Maximum container size: 5" diameter x 12" height. Equipped with 14 gallon heated hopper with level detection, mechanical container height and piston adjustment, No Container / No Fill, 4-1/2" x 6' conveyor track, S/S contact parts and Lexan guarding.
Air requirements: 60 psi at 1 CFM.
Maximum fill volume: 35 oz (with proper pistons)
Left to right product flow.
OAD: 120" L x 48" W x 80" H Weight: 3000 LBS

Rotary, 14 head, piston filler rated to 400 cpm with a fill range to 52 oz. and a container size range from 202 - 404 diameter by 700 high. No container /no fill, 25 gl capacity hopper, pistons measure 4" inside diameter x 19" length and has screw to starwheel infeed. 316 Stainless steel contact parts. Filling speeds depend on product, temperature and container size. Right to left machine. Last used on 48 oz soup into a 404 x 700 can.
OAD= 56"L x 52"W x 86"H

More Photos: 2

Rotary motion , 22 head piston filler with all s/s contact parts. 3" dia pistons for filling to 20 oz fills at speeds up to 660 cpm. Worm to star infeed. Will accept 202 - 303 dia, containers with proper change parts. 4.189" valve centers. S/S bowl holds 16 - 21.3 gallons product. Valves are controlled by magnetic monitor to eliminate jamming & no can/no fill. Line shaft driven. Last filling 202 diam non-round containers.
O.A.D 72 in. H x 76 in. W x 76 in. L

.

More Photos: 2

Rotary motion , 18 head piston filler with all s/s contact parts. 3" dia pistons for filling up to 20 oz at speeds up to 540 cpm. Counter-clock wise rotation w/worm to star infeed. Will accept 202 - 303 dia, containers with proper change parts. 4.189" valve centers. S/S bowl holds 16 - 21.3 gallons product. Valves are controlled by magnetic monitor to eliminate jamming & no can/no fill. Line shaft driven. Last filling 211 diam. containers.
O.A.D 87 in. H x 60 in. W x 54 in. L

More Photos: 1

Fully automatic 10 head rotary piston filler capable of speeds up to 300 cpm. Has a can diameter range: 202 - 404. Filler bowl has a 9 gallon product capacity, pistons measure 3-3/4" inside diameter x 19-1/2 " length (52oz capacity), no container no fill, starwheel infeed to starwheel discharge. Currently set up with 4 5/8" O.D. / 3 3/4" I.D. pistons. All stainless steel contact parts. Last ran in a juice operation.

OAD: 48"l x 42"w x 72"h.

More Photos: 2

Fully automatic 10 head rotary piston filler capable of speeds up to 150 cpm. Has a can diameter range: 202 - 404. Filler bowl has a 9 gallon product capacity, pistons measure 3-3/4" inside diameter x 16-1/2" length (42.5oz max. capacity) , no container no fill, starwheel infeed to starwheel discharge. Currently set up with 4 5/8" O.D. / 3 3/4" I.D. pistons. All stainless steel contact parts. Last ran in a juice operation.

OAD: 48"l x 42"w x 72"h.

More Photos: 2

Pfaudler 14 head rotary piston filler with four station Continental can seamer type 336-cr-ir. 14 head filler has 2-3/4"dia cylinders with 5/8"dia tapered nozzles. Filler has worm screw infeed and no container, no fill. Continental Can seamer is a model 336-cr-1r. Can seamer size range: (Diameter) 202 to 404, (Height) 104 to 600. Filler and can seamer has a 6'l lugged conveyor on 7" centers transporting cans from the filler to the seamer. Mounted on common frame w/casters. Last ran a 211 diameter 16oz can at speeds of 150 cpm. OAD: 11'l x 6'w x 7'6"h.

Fully automatic 28 head rotary gravity filler capable of speeds over 300 CPM. Filling nozzles are set on 5-1/4" centers. Currently set on 404 diam cans and was last used in a food operation filling soup and juice. Has bottom up fill and was driven by a seamer. Fill volume determined by can diameter. Has worm screw to star wheel infeed. Has standard open air type filling valves. All contact parts, and frame are constructed of S/S. OAD: 56"W x 75"L x 65"H.

Fully automatic 28 head rotary gravity filler capable of speeds over 400 CPM. Filling nozzles are set on 5-1/2" centers. Currently set on 211 diam cans and was last used in a soup operation filling chicken broth. Has bottom up fill and was driven by a seamer. Fill volume determined by can diameter. Has worm screw to star wheel infeed. Has standard open air type filling valves. All contact parts and frame are constructed of S/S. OAD: 72"W x 56"L x 56"H.

30 head rotary, volumetric filler capable of speeds over 500 cpm (depending on application). Has can diameter range from 202 - 404 (currently set on 4" centers for a 211 dia can). Volume determined by diameter and height of pockets (which are changeparts). currently 30 funnel style cups on a 52" dia base with dimmentions of: (4"dia top product infeed, 2 1/4" bottom product discharge and 3" deep). All S/S construction 36" L product worm screw infeed to starwheel container handling. Unit is driven by seamer. Can handle products such as diced vegetables, corn, peas, berries, meat balls, cubed meats etc. Last used in a food operation filling dried beans into a can.

OAD: 72"W x 78"L x 80" H

More Photos: 4

36 Valve rotary piston filler equipped with 40 oz pistons set on 5-1/4" centers and rated to 900 cpm. Containers diameters: from 2" to 4-1/4". Features no container - no fill, worm to star in feed and individual piston stroke adjustment. Bowl capacity 150 gallons with a working capacity of 112 gal. Counterclockwise rotation. Last running (32 oz) 307 x 710 cans at 400cpm.

More Photos: 4

FMC 15 pocket granular filler with Rutherford syrup dispenser. Unit currently seton 5" centers for a 300 x 407 can. Filling mechanism and hopper constructed of s/s, machine frame is painted cast. Syrup dispenser construced of nylon. Machine last filling peas.

Automatic 19 head, rotary S/S, gravity filler capable of speeds up to 200 cpm (depending on application). Fill nozzles on 6"centers, and currently set for 301 dia cans. Fill volume determined by can dia. Has (4'L x 4" W) product conveyor, to star wheel infeed. standard open air type filling valves with bottom up fill. All contact parts, and frame are S/S constructed . Driven by a seamer.

OAD: 80"L x 74"W x 83"H

10 Head rotary piston filler capable of speeds up to 200 cpm. Diameter range: 202 - 404. Filler bowl has a 9 gallon product capacity, 21 oz pistons 2-3/4" diameter, l s/s contact parts.
Last running: 307 x 113 high; 307 x 202 high;307 x 510 high can at a speed of 175 cpm.

More Photos: 2

Fully automatic 10 head rotary piston filler capable of speeds up to 150 cpm. Currently set up with 2-3/4" diameter pistons combined with 3 1/2" cam pitch filling range to 28 ounces. Unit set for a 211 x 300 High & a 211 x 400 high can at a speed of 125 cpm. Unit has a can diameter range: 202 - 404. Filler bowl has a 9 gal product capacity. Unit is equipped with all s/s contact parts. Last doing clam chowder, minced clams & clam sauce. 28 oz pistons on machine.

Fully automatic 10 head rotary piston filler capable of speeds from 50 to 250 cpm (depending on can size & fill). Has container size range: 202 - 404 dia x 101 - 700 Height. Equipped w/10 gal (38 liter) 15 1/8" dia hopper, 41" L x 3 1/4" W conveyor, worm screw/starwheel infeed & spaces container 6.25" apart. Has 3" piston with min/max stroke of 1/2" - 5 1/4" for 21 oz max capacity .

Last running 401 x 509 composite cans at 480 - 520 cpm. Fillers had brass contact parts. Pallet consists of various spare mechanical parts for fillers (not container handling parts). Originally were spare parts to support 3 fillers in operation.

More Photos: 3

Automatic, 14 head, rotary, 316 S/S, piston filler capable of speeds up to 200 cpm depending on application. Has 48" OD turntable, with (14) 3/4" OD, 3/8" ID fill nozzles currently set on 10 1/4" centers, is capable of handling jugs, bottles, plastic containers, or # 10 tin cans, and volumetric fills of up to 180 oz with accuracies of 0.25 oz. and a 82 gallon capacity product bowl, 120" L x 4 1/2" W delron chain conveyor with worm screw to star wheel container handling.

OAD: 130" L x 80" W x 111" H