Used Capsule Equipment
62 Filler Powder machines IN-STOCK!

More Photos: 4

Continuous motion, straight line, tumble filler rated up to 500 fills per minute - depending on materials and application. Container size: 1-1/2" to 6-1/2" in Diameter; 1-1/2" to 7" in Height. Equipped with a 132" long container conveyor with adjustable height guide rails, 36" diameter x 48" long filling chamber, stainless steel guarding, 36" long x 24" wide drip pan, and push button controls. Mounted on a stainless steel frame with height adjustable legs. Filler uses container as measuring device, for precise filling. "Shake-While-Fill" orients product in container while fill angle determines volume, and no product waste.

OAD: 132" L x 42" W x 75" H

More Photos: 4

Automatic, inline, dual head, stainless steel, weigh scale auger filler rated up to 140 containers per minute - depending on materials and application. Container size: up to 7" in Width. Equipped with a 132" long two chain conveying system, adjustable container guide rails, 43A auger filler with a 22" diameter x 16" deep hopper, 12" inlet, sweep agitation, 9" long weigh cell, 43A auger filler with 16" diameter x 12" deep hopper, sweep agitation, 9" long weigh cell, and a push button control panel. Mounted on height adjustable legs.

OAD: 132" L x 32" W x 96" H

More Photos: 2

Compact, intermittent motion, single dose capsule filler, rated up to 40,000 capsules per hour - depending on materials and application. Capable of handling capsule sizes: 00, 0, 1, 2, 3, 4 and 5 with powders, granules and pellets, as well as tablets (with proper change parts). Vertical movement, vacuum dosators and limited change parts for fast change-over. Capsule Tech Inc integrated controller and safety guarding.

OAD: 43" L x 40" W x 72" H

More Photos: 2

parts machine

More Photos: 2

Twin auger filler rated up to 80 fills per minute - depending on materials and application. Equipped with two stainless steeel 22" diameter x 20" deep oval product hoppers, 12" x 8" product inlet, two 1" diameter auger screws with 8" of seperation between them, level controls, timer controls, and foot pedal activation switch. Mounted on a 132" long x 48" wide column base frame with 84"

OAD: 132" L x 48" W x 128" H

More Photos: 2

Pneumatic gross weight, slant bottom valve bag packer rated up to 10 (50lb) bpm - depending on materials and application. Bag size range: up to 32" in Length. Fill range: up to 110 pounds. Accuracies: up to +/- 4oz. Equipped with low pressure product supply column and timer actuated air cylinder, dust collection hood, bag clamp that closes on bag and opens cylinder to filling spout, weigh beam scale system with automatic bag kick off discharge. Taylor electronic weigh system with touch pad controller and digital readout.

OAD: 64" L x 18" W x 89" H

More Photos: 2

Pneumatic gross weight, slant bottom valve bag packer rated up to 10 (50lb) bpm - depending on materials and application. Bag size range: up to 32" in Length. Fill range: up to 110 pounds. Accuracies: up to +/- 4oz. Equipped with low pressure product supply column and timer actuated air cylinder, dust collection hood, bag clamp that closes on bag and opens cylinder to filling spout, weigh beam scale system with automatic bag kick off discharge. Taylor electronic weigh system with touch pad controller and digital readout.

OAD: 64" L x 18" W x 89" H

More Photos: 2

Pneumatic gross weight, slant bottom valve bag packer rated up to 10 (50lb) bpm - depending on materials and application. Bag size range: up to 32" in Length. Fill range: up to 110 pounds. Accuracies: up to +/- 4oz. Equipped with low pressure product supply column and timer actuated air cylinder, dust collection hood, bag clamp that closes on bag and opens cylinder to filling spout, weigh beam scale system with automatic bag kick off discharge. Taylor electronic weigh system with touch pad controller and digital readout.

OAD: 64" L x 18" W x 89" H

More Photos: 2

Open mouth bag weigh scale filling system rated up to 12 weighments per lane or 25 bpm - depending on materials and application. Bag size range: up to 27" in Length; up to 19" in Width. Fill range: 5 to 50 lbs. Accuracies: +/- 2 grams on 10 lbs of sugar; +/- 7 grams on 50 lbs of pet food. Equipped with 3 lane linear scale system, 18" wide discharge funnel, S-series Simplex bag hanger with magazine, reciprocating bag pick and place, vacuum bag opener, bag platform with single arm discharge and take away conveyor. Additional features: microprocessor controller and conditioning conveyor. Last running 5 lb bags of pet food at 25 bags per minute.

OAD:

More Photos: 2

4/16 pocket, stainless steel, rotary volumetric filler rated up to 120 fills per minute - depending on materials and application. Fill size range: 0.5 - 185 in³ (8cc - 3 liter). Equipped with a 8 ft³ product hopper with two product diverters, sixteen 1" diameter x 2" deep product pockets, four leveling brushes, eight port custom discharge, and variable speed controls. Mounted on a stainless steel frame.

OAD: 56"L x 36"W x 55"H

More Photos: 2

4/16 pocket, stainless steel, rotary volumetric filler rated up to 120 fills per minute - depending on materials and application. Fill size range: 0.5 - 185 in³ (8cc - 3 liter). Equipped with a 8 ft³ product hopper with two product diverters, sixteen 1" diameter x 2" deep product pockets, four leveling brushes, eight port custom discharge, and variable speed controls. Mounted on a stainless steel frame.

OAD: 56"L x 36"W x 55"H

More Photos: 2

4/16 pocket, stainless steel, rotary volumetric filler rated up to 120 fills per minute - depending on materials and application. Fill size range: 0.5 - 185 in³ (8cc - 3 liter). Equipped with a 8 ft³ product hopper with two product diverters, sixteen 1" diameter x 2" deep product pockets, four leveling brushes, eight port custom discharge, and variable speed controls. Mounted on a stainless steel frame.

OAD: 56"L x 36"W x 55"H

More Photos: 2

4/16 pocket, stainless steel, rotary volumetric filler rated up to 120 fills per minute - depending on materials and application. Fill size range: 0.5 - 185 in³ (8cc - 3 liter). Equipped with a 8 ft³ product hopper with two product diverters, sixteen 1" diameter x 2" deep product pockets, four leveling brushes, eight port custom discharge, and variable speed controls. Mounted on a stainless steel frame.

OAD: 56"L x 36"W x 55"H

More Photos: 2

4/16 Pocket, stainless steel, rotary volumetric filler rated up to 120 fills per minute - depending on materials and application. Fill size range: 0.5 - 185 in³ (8cc - 3 liter). Equipped with a 8 ft³ product hopper with two product diverters, sixteen 1" diameter x 2" deep product pockets, four leveling brushes, eight port custom discharge, and variable speed controls. Mounted on a stainless steel frame.

OAD: 56"L x 36"W x 55"H

More Photos: 2

Dual head, automatic, servo driven, pre-made wicketted bag filler capable of speeds up to 55 bpm depending on application. Has a bag size range of: 4" - 14" W x 4" - 24" L, with standard bag magazine capacity of 500 -1000 depending on size bag, and is to be integrated with scale systems and bag sealers. Has dual funnel feed hoppers with (2) 7 1/4" L x 5 1/2" W x 10" D product discharge buckets designed to open, fill and transfer pre-made wicketed bags into a sealing or closing machine with easy and rapid product change over requiring no additional tools. Has A/B Micrologix 1500 controller with a 550 panel view, last timed with Ishida scale system.

OAD: 60" L x 40" W x 78" H

More Photos: 4

8 Pocket volumetric filler capable of speeds up to 140 fills per minute - depending on materials and application. Equipped with stainless steel feed shoot, eight 5-1/4" diameter telescoping pockets, manual adjusting upper turret plate for quick and easy volume adjustment, stationary brush bars to assure level fills in each cup and eight independent trap door seal bottoms which are cam activated to discharge with precision timing. All contact parts are stainless steel, aluminum or food grade plastic. Cylinders required per application.

OAD: 48" L x 42" W x 34" H

More Photos: 2

(6) pocket volumetric filler capable of doing up to 80 indexes @ min, speeds dependent on size fill, and product being run. Has a cup size range of 1" - 4" Dia x 0.62 - 12" L, and a fill range from 0.5 - 200 cu inches each head currently set with a 13" dia filling plates with (4) 1 1/4" Dia x 2" Deep product pockets, and leveling brush each head and 2" OD x 8" L discharge chutes, and has 12" ID x 20" Deep, and 18" Dia x 28" D S/S, product hoppers, with 1/2 Hp drives each, and mounted on base frame.

OAD: 54" L x 40" W x 48" H

More Photos: 2

6 Pocket volumetric filler capable of speeds up to 120 fills per minute - depending on materials and application. Equipped with stainless steel reservoir feed hopper, six 5-1/4" diameter telescoping pockets, motorized upper turret plate for quick and easy volume adjustment, stationary brush bars to assure level fills in each cup and six independent trap door seal bottoms which are cam activated to discharge with precision timing. All contact parts are stainless steel, aluminum or food grade plastic. Cylinders required per application.

OAD: 44" L x 38" W x 54" H

More Photos: 2

Semi-automatic stainless steel auger filler. Equipped with a 16 gallon agitated product hopper with cover and 2-1/2" OD sanitary port, site port and a 7" dia product port, electro mechanical clutch-brake assembly, and motor starter. Rates dependant on materials and application. Accuracies: +/- 1% depending on materials and application.

OAD: 43" L x 38" W x 56" H

More Photos: 2

12 pocket, rotary, continous motion, stainless steel auger filler rated to 200 containers per minute - depending on materials and application. Container size range: 3" to 5" in Diameter x 1/2" to10" in Height, fill range from oz to lbs with accuracies of +/- 1/2 of 1%. depending on product. Equipped dual one piece stainless steel product hopper, with twin agitatiors, set on 14" centers, and dust proof cover with 10" dia single product feed port. 120" L x 3" W, S/S delron chain product conveyor, has a worm screw to star wheel infeed / discharge and 34" infeed / discharge height. 45" dia turret with (12) 9" L x 4 1/2" W x 5" D product funnels on 12" centers with no container / no fill, control panel with start / stop, feed, conveyor, vibrator, turret controls with e-stop and is mounted on a S/S base frame.

OAD: 136" L x 70" W x 99" H

More Photos: 2

Semi-automatic, servo driven, stainless steel, auger filler capable of speeds up to 120 cycles per minute with accuracies of +/- 1% depending on materials and application. Equipped with all stainless steel contact parts, 22" diameter, 16 gallon product hopper with agitator, bolt down dust cover, 6" diameter product port, 6" long x 3" wide sight port and level detector. Features Spee dee digitronic 3500 servo conversion kit controller, and was mounted on platform over f/f/s machine.

OAD: 36" L x 24" W x 60" H

More Photos: 3

Vacuum powder filler & stoppering unit. Container size range of: 0.75" to 2.5" in Diameter; 1" to 6" in Height. Fill capacity: 50 milligrams to 1.5 grams. Can accommodate stoppering sizes: 11, 13, 20, 28, and 30 mm. Equipped with a 30" diameter unscrambling table with 20 x 20 load area, a 48" by 2" stainless steel mesh conveyor, product hopper, an 8 position Accofil rotary vacuum / pressure fill wheel, stopper hopper, stopper peal off station with dual compression rollers, dual 12" x 1 " single gripper container belts and 30" diameter accumulation table. Controls for start, stop, unscramble, dose, stopper, and accumulation and e-stop. Stainless steel system. Change parts required to accommodate size / fill range. Speed dependant on materials and application.

OAD: 128" L x 33" W x 68" H

More Photos: 2

44 head rotary, volumetric filler rated up to 370 cpm - depending on materials and application. Fill range: up to 32oz fills. Container diameter: up to 4-1/2". Equipped with a 72" diameter rotary platform set on 5" centers, bottom up fill, with no container / no fill and interlocked dust hood saftey enclosure, centralized lube system, with dust collector port, and was last running in a food operation. Change parts required to accommodate range.

OAD: 80" L x 84" W x 88" H

More Photos: 2

Carbon steel, volumetric, drop gate bulk feeder, capable of doing up to 30 product dumps a minute, depending on size container, and product being filled. Has an enclosed 48" inside diameter x 26" high volumetric fill section, with rortary product sweep blade. "U" shaped 30" L x 13" W product infeed chute, and a 24" L x 20" W product discharge chute with 36 " discharge height, and is mounted on a common base frame. Last mezzanine mounted above a vert f/f/s machine fillng 1 cu ft bags of top soil.

OAD: 67" L x 64" W x 77" H

More Photos: 3

Carbon steel, bulk powder, scale filler, capable of doing up to 30 product dumps a minute, depending on size container and product being filled. Has a enclosed, manual set, slide bar beam weigh scale system, with a weight range of 10 - 100 lbs, with a 16" W x 12" L bulk product feed port, to a 20" W x 24" L bulk product feeder belt, that feeds a 22" W x 22" L x 22" D carbon steel bulk product accumulation / discharge bucket, and is mounted on a common base frame. Ideal for filling powder, pelleted, and granular type products, and was last mezzanine mounted above a vert f/f/s machine fillng 1 cu ft bags of top soil.

OAD: 72" L x 64" W x 70" H

More Photos: 3

Automatic, inline, auger filler. Equipped with a 16 gallon agitated product hopper with dust cover, one 6" and one 7" top ports. 80" long x 3-1/4" wide Delrin container conveyor with guide rails and pneumatic container indexing system, variable speed and mounted on height adjustable legs.

OAD: 108" L x 32" W x 80" H

More Photos: 4

Automatic, inline, dual head, stainless steel, auger filler. Size range : up to 6" in Diameter; up to 16" in Height. Dual one piece product hopper, with two Neotron augers set on 19" centers, dust proof cover with 7"product port, block chain conveyor, bottom up fill, vibrating filling station, no container / no fill, pneumatic indexing, touch pad controller, 48" long by 6" wide flex link in feed, / discharge conveyors. Speed dependant on materials and application.

OAD: 168" L x 36" W x 93" H

More Photos: 2

Automatic, in line, dual head, S/S, auger filler capable of doing up to 50 cpm depending on application. Container size range of : 3" - 6" W x 1/2" - 16" H, fill range from 2oz - 10 lbs with accuracies of +/- 0.15%. Dual S/S product hopper, with two Neotron fillers, set on 38" centers, dust proof covers with 7" dia product feed ports, level sensor, block chain product fill conveyor, , no container / no fill, pneumatic container indexing, Mateer SL3 controller, with touch pad , and panel view read out, and is mounted on a S/S base frame, and foot pedal jog control.

OAD: 192" L x 60" W x 105" H

More Photos: 3

Open mouth bag filler for use with pre-formed bags. 4-lane linear scale, single bulk open mouth bag filling system, capable of fills up to 100 lbs and speeds up to 70 bpm depending on application. Unit has (4) 12"L x 10"W infeed buckets, which feed into (2) 8"L x 9"W discharge buckets, which discharge into a 12"L x 38"W feed hopper with a 3"L x 6"W pneumatic discharge chute and a (6) cup vacuum bag opener. Equipped with 18"L x 10"W bag magazine, a (4) cup recipicating pick & place, 216"L x 6"W conditioning conveyor with (2) 60"L x 7-1/2"W side belt conveyors and (2) guide rails at 20"H.

OAD: 54"L x 84"W x 140"H

Open mouth, gross weight scale, bulk bag filler rated for for up to 110 lb bags (speeds depending on application).
(18" L x 16" W x 8 1/2" D) product hopper, (6" dia x 30" L) auger. Has a gross weight scale beam system, 1/3 hp motor belt drive, push botton start/stop botton with e-stop.

OAD: 36" L x 18" W x 66" H