Used Plate and Frame Equipment
60 Filter machines IN-STOCK!

Parkson Hydroscreen Model HS36DF, liquid / solids separation system used in municipal and industrial applications for screening fibrous and nongreasy solids with dry weights of 800 lbs and operating weights of 3100 lbs. Compact design with no moving parts, motors, or complicated connections, simple and economical to operate one of the most basic Parkson screens, with high throughput, swinging baffle across the weir directs the flow for efficient screen operation. Unique bi-wave wedgewire screen panel, with double downward curves, increases the rapidly stripping of liquid from the influent as it hits the top of the screen panel, rapid shearing maximizes solids capture and minimizes screen blinding. Additional drainage occurs as the solids captured by the screen roll down the curved screen face. At the end of the screen panel is a drip lip that directs the drained liquid away from the solids and returns it to the filtrate chamber.
Headbox options, including deep flat and shallow tapered designs to accommodate solids loading.

More Photos: 4

Alar Model 220 Auto-Vac, self contained, pre-piped, pre-wired, skid mounted rotary vacuum drum dewatering filter system capable of filtering sludges down to 1/2 micron. Equipped with 24" Diameter x 24" Long rotary drum 22" ID x 37" straight wall poly filter and mixing tank. with 12.6 square foot filtration area and is self-cleaning with each revolution, vacuum system with pump and cyntrifical transfer pump. Control panel with filter agitation, drum drive, vacuum pump, reciver pump, knife advance on/off switches with e-stop and mounted on skid.

OAD: 115" L x 80" W x 75" H

More Photos: 4

WRITE-UP-IN PROGRESS
Alar Model Micro-Klean Hydraulic, plate and frame, filter press rated at 20 minutes per filtration cycle. Equuipped with (11) 19-1/4" Long x 19-14" Wide x 2-1/4" thick recessed polypropylene filtration plates, hydralic opening and closing ram with maximum filtration pressure of psi. Filtration area: square feet. Volume: cu ft /, with two 1-3/4" OD threaded, top, and two 1-3/4" OD threaded bottom outlets. PVC piping and mounted on (4) leg forkable base frame.
Dewatering system removes solids from wastewater and produces a clean effluenthas.

OAD: 91" L x 30" W x 56" H

More Photos: 4

Cuno Incorporated 12ZPIP, 1 Cartridge, 316 Stainless Steel, sanitary filter housing. Media Area: 16.4 ft². Vessel dimensions: 12" in Diameter; 10.75" in Height. Pressure rating: 150 psig @ 212° F. Equipped with a dome top with 2" OD inlet, bolt down cover, pressure gauge, and a 2" OD side bottom discharge. Mounted on a stainless steel frame.

OAD: 16" L x 16" W x 40" H

More Photos: 4

Millipore P630x500x500, Chromatography column. Column tube diameter: 630 mm. Column tube height: adjustable up to 50 cm. Capacity: 156 Liter. Operating pressure: up to 3.15 bar. Operating temperature: 0° C to 30° C. Process connection: 3/4" diameter. Slurry connection: 1" diameter. 316 Stainless steel and Acrylic construction. Mounted on locking casters.

OAD: 40" L x 40" W x 58" H

More Photos: 4

Millipore P1000x500x500, Chromatography column. Column tube diameter: 1000 mm. Column tube height: adjustable up to 50 cm. Capacity: 385 Liter. Operating pressure: up to 3.15 bar. Operating temperature: 0° C to 30° C. Process connection: 3/4" diameter. Slurry connection: 1" diameter. 316 Stainless steel and Acrylic construction. Mounted on locking casters.

OAD: 48" L x 48" W x 58" H

More Photos: 4

Millipore Millistak 1Rx1/2H, 316 Stainless steel, cartridge filter housing. Vessel dimensions: 12" in Diameter; 6" Staright Wall. Operating pressure: -15 psi to 145 psi. Operating temperature: -10° C to 135° C. Equipped with a bolt down stainless steel cover, pressure guage, and 2" OD Tri-Clover inlet and outlets. Mounted on a stainless steel frame.

OAD: 16" L x 16" W x 24" H

More Photos: 4

Millipore Millistak 1Rx1/2H, 316 Stainless steel, cartridge filter housing. Vessel dimensions: 12" in Diameter; 6" Staright Wall. Operating pressure: -15 psi to 145 psi. Operating temperature: -10° C to 135° C. Equipped with a bolt down stainless steel cover, pressure guage, and 2" OD Tri-Clover inlet and outlets. Mounted on a stainless steel frame.

OAD: 16" L x 16" W x 24" H

More Photos: 4

Stainless steel, rotrary screen finisher. Filtration area: 12" in Diameter; 24" in Length. Equipped with one 2.5" OD Tri-clover inlet, two 2" OD Tri-clover inlet/outlets, spring loaded nylon scrapers, and crank open closures. Mounted on a stainless steel frame with casters.

OAD: 60" L x 20" W x 40" H

More Photos: 4

2 Cartridge, 316 Stainless steel, sanitary filter housing. Media area: 32.8 ft². Vessel dimensions: 12" in Diameter; 24" Straight Wall. Pressure rating: 150 psig @ 212° F. Equipped with a dome top with 2" OD inlet, bolt down cover, two 12" dia x 10.75"H filter cartridges, pressure guage, and two 2" OD side bottom dicharges. Mounted on a stainless steel frame with casters.

OAD: 24" L x 24" W x 48" H

More Photos: 4

316 Stainless steel, filter housing. Vessel Dimensions: 16" in Diameter; 36" Straight wall. M.A.W.P.: 45 psi @ 302° F; M.D.M.T. -20° F @ 45 psi. Equipped with a bolt down cover, dome top with 1.5" top center inlet, 0.5" OD inlet, and two 2" OD discharges with hand crank valves. Mounted on stainless steel legs with casters.

OAD: 24" L x 24" W x 80" H

More Photos: 4

Poly carbonate, horizontal, plate and frame filter press. Filtration area: 95 ft²; 4.34 ft² per plate, 22 total plates. Equipped with four 2" OD threaded inlet / outlets, one 1.5" OD threaded outlet, and variable pressure settings.

OAD: 112" L x 30" W x 62" H

More Photos: 1

316 stainless steel, cartridge filter. Vessel dimensions: 16" in Diameter; 36" in Height. MAWP: 45 PSI and full vacuum @ 302°F; MDMT: -20°F @ 45 PSI and full vacuum. Equipped 2" OD top center inlet, 2" OD bottom side inlet with 19" of floor clearance, and a 2" OD bottom side outlet with 19" of floor clearance. Mounted on locking casters.

OAD: 24" L x 24" W x 68" H

More Photos: 1

316 stainless steel, cartridge filter. Vessel dimensions: 16" in Diameter; 36" in Height. MAWP: 45 PSI and full vacuum @ 302°F; MDMT: -20°F @ 45 PSI and full vacuum. Equipped 2" OD top center inlet, 2" OD bottom side inlet with 19" of floor clearance, and a 2" OD bottom side outlet with 19" of floor clearance. Mounted on locking casters.

OAD: 24" L x 24" W x 68" H

More Photos: 1

316 stainless steel, cartridge filter. Vessel dimensions: 16" in Diameter; 36" in Height. MAWP: 45 PSI and full vacuum @ 302°F; MDMT: -20°F @ 45 PSI and full vacuum. Equipped 2" OD top center inlet, 2" OD bottom side inlet with 19" of floor clearance, and a 2" OD bottom side outlet with 19" of floor clearance. Mounted on locking casters.

OAD: 24" L x 24" W x 68" H

More Photos: 1

316 stainless steel, cartridge filter. Vessel dimensions: 16" in Diameter; 36" in Height. MAWP: 45 PSI and full vacuum @ 302°F; MDMT: -20°F @ 45 PSI and full vacuum. Equipped 2" OD top center inlet, 2" OD bottom side inlet with 19" of floor clearance, and a 2" OD bottom side outlet with 19" of floor clearance. Mounted on locking casters.

OAD: 24" L x 24" W x 68" H

More Photos: 1

316 stainless steel, cartridge filter. Vessel dimensions: 16" in Diameter; 24" in Height. MAWP: 45 PSI and full vacuum @ 302°F; MDMT: -20°F @ 45 PSI and full vacuum. Equipped 2" OD top center inlet, 2" OD bottom side inlet with 19" of floor clearance, and a 2" OD bottom side outlet with 19" of floor clearance. Mounted on locking casters.

OAD: 24" L x 24" W x 56" H

More Photos: 1

316 stainless steel, cartridge filter. Vessel dimensions: 16" in Diameter; 36" in Height. MAWP: 45 PSI and full vacuum @ 302°F; MDMT: -20°F @ 45 PSI and full vacuum. Equipped 2" OD top center inlet, 2" OD bottom side inlet with 19" of floor clearance, and a 2" OD bottom side outlet with 19" of floor clearance. Mounted on locking casters.

OAD: 24" L x 24" W x 68" H

More Photos: 2

316 stainless steel, cartridge filter. Vessel dimensions: 16" in Diameter; 24" in Height. MAWP: 45 PSI and full vacuum @ 302°F; MDMT: -20°F @ 45 PSI and full vacuum. Equipped 2" OD top center inlet, 2" OD bottom side inlet with 15" of floor clearance, and a 2" OD bottom side outlet with 19" of floor clearance. Mounted on locking casters.

OAD: 24" L x 24" W x 56" H

More Photos: 1

316 stainless steel, cartridge filter. Vessel dimensions: 16" in Diameter; 36" in Height. MAWP: 45 PSI and full vacuum @ 302°F; MDMT: -20°F @ 45 PSI and full vacuum. Equipped 2" OD top center inlet, 2" OD bottom side inlet with 19" of floor clearance, and a 2" OD bottom side outlet with 19" of floor clearance. Mounted on locking casters.

OAD: 24" L x 24" W x 68" H

More Photos: 1

Vertical, liquid-solids separation system rated from 140 to 290 gallons per minute - depending on materials and application. Particle size range: up to 0.375" (9mm). Pressure rating: up to 150 psi (10.3 bar). Pressure loss range: 5 - 21 psi. Temperature rating: up to 180° F (82.2°C). Equipped with 3" NPT inlet / outlets and a 2" solids purge valve.

OAD: 60" L x 21" W x 18" H

More Photos: 3

1700 gallon, S/S, continuous motion, vacuum, drum filter with a 6' dia x 8' L, 150 ft², drum. Has positive seals on drum ends and between drum compartments, fixed position blade scrap discharge, filter agitation, variable speed drive, (2) filter drains, and a 154"L x 7"dia screw discharge conveyor with 2.5" ribbons, 2"dia shaft, on 5" centers. Mounted on a mild steel frame.

OAD: 196"L x 102"W x 96"H

More Photos: 4

Self contained media air cleaning system. Effectively removes smoke, mist, dust, and other airborne contaminants at a rate of up to 6000cfm. Unit has (2) 23 3/8"L x 23 3/4"W x 11 1/2"H non-shedding polypropylene filters, a 306ft² collection area, a maximum ambient temperature of 175°F, and a 5hp drive.

OAD: 48"L x 50"W x 34"H

More Photos: 3

3 Ozone generator system capable of up to 42 lbs of ozone per day. Equipped with a 3 Model G-14 generators, Kaeser air compressor with a capacity if 60scfm @ 100psig, min pressure of 50psi, max pressure of 150psi, and max temperature of 120F. PCI Model LC ozone monitor with an LED display for concentration (in ppm), an Allen Bradley SLC 502 CPU, an operator interface with LED display, and each generator has a separate power source and lock-out, air conditioners for each generator, and controls for scfm air, air pressure and ozone output.

OAD: 202"L x 56"W x 88"H

More Photos: 2

Centrifugal mist and smoke collector capable of 300cfm @ 1" ESP (external static pressure). Has 98% efficiency on 1.0 micrometer particles, 3 stages of filtration, 4" dia intake, 24"L x 12"W clean air discharge, 16-guage steel encasement, horizontal pre-filter trap, drain kit, throw away liner, primary filter, secondary filter, and exhaust grill filter. Powered by 1hp Century motor. Designed to collect, filter, and reclaim mist generated from machines using oil-based, synthetic, semi-synthetic, or water soluble coolants. Mounted on casters.

OAD: 40"L x 30"W x 78"H

More Photos: 1

S/S filter press equipped with five-1/4"W x 12"Diameter plates for 8 sqft of filter area with an overall length of 1-3/4"W. Equipped with a motor rated at 1/3 hp, 1" diameter NPT discharge valve, a 1/2" overflow valve and drip pan.

OAD: 32"L x 28"W x 28"H

More Photos: 2

Continuous, inline, high temperature oil filtration system rated at MWAP of 70 psi @ 350° F and MDMT of -20° F @ 70 psi. Equipped with 2-1/2 ID NPT inlet / outlets, a round cartridge housing with multiple metal filter disc's that extract particulate contaminations (ex., metal shavings, rust and other particles) from oil and are then scraped off with internal cleaning blades and dropped down to catch basin for removal. Similar to cars oil filter but on industrial level.

OAD: 38" L x 12" W x 16" H

More Photos: 2
Play Video

All stainless steel rotary screen sifter. Equipped with 36" diameter by 48" long waste water scalper,with 470 microns (0.018 inch) sifting screen, 39" W x 12" L scraper plate for solids, and a 49" W x 21"L x 18 D sludge collector bin, with (2) 2" diameter, and (1) 3-1/2" diameter bottom discharges. Has 1-1/2 Hp motor drive and mounted on a stainless steel base with 2 1/2" side bottom discharge.

OAD: 84" W x 65" L x 45" H

More Photos: 2

Stainless steel upflow cartridge filter capable of handling up to 600 gpm and rated at 150 psi with a temperature rating to 140 deg F. Equipped with 9" diameter flange with 4-1/2" ID inlet and outlet.

OAD: 30"L x 30"W x 48"H

More Photos: 1

CSL series, ultraviolet, water filtration system, is a all stainless steel constructed, compact one piece design, capable of doing up to 166 gpm. 316L S/S construction treatment chamber, and 304 S/S cabinet housing, standard operating pressure of 120 psig (8.3 bar), and has 8 ultraviolet tubes with 30,000 UV dosage. (2) top 7 1/2" diameter flanges with (4) 3/4" diameter bolt holes on 4" centers, and 3 1/2" diameter product openings, mounted on the 58" L x 6" diameter filtration treatment chamber tube.

OAD: 69" L x 12"W x 26" H