Auger Machines

Used Auger Equipment

There are two type of rotary filters and the first is similar to the leaf filter were the liquid with the suspended solids are pumped through a rotating filter section and the solids are retained until they are concentrated. Another version of the rotary filter is the rotary drum filter where a drum rotates into the liquid solution and the drum is under vacuum while that portion of the drum is submerged. The drum is also wrapped with a filter media to remove the solids from the stream. The vacuum process continues while the drum is rotating. The fabric is a continuous stream that is then pulled away from the drum and doubles back to discharge the filtered materials.

Contact Us

Auger Equipment In Stock

Viking Masek Global Packaging Form & Fill Auger M250/3800S

Viking Masek Global Packaging Tech, Model M250, Vertical form, fill, seal machine, rated from 10 to 100 cycles per minute with number of bags or pouches – depending on materials, application and machine configuration. All Stainless steel construction. Bag or pouch size range of: 2.3" to 15.75" long x 3.1" to 10.5" wide. Film Roll size of: 28" width maximum. Equipped with Spee Dee single head auger filler and product hopper, fill tube, dual side belt assist, 17" long lap seal bar with 11¼" wide horizontal seal jaws with product discharge chute. Control panel has PLC controller with panel view controls and start, stop, reset and e-stop push buttons. Mounted on stainless steel frame with height adjustable legs and interlock safety doors.

Video Jet 6330 Thermo printer at Additional Cost

OAD: 96" L x 53" W x 64" H – (Without Auger Filler)
32" L x 32" W x 68" H – Spee Dee

Get a Free Quote Call: 630-629-9900

Viking Masek Global Packaging Form & Fill Auger ST200

Viking Masek, Model ST200, 2-up, stick pack form, fill and seal. Size range: 17mm to 40mm in Width; 50mm to 200mm in Length. Equipped with dual augers assembly, film slitters, dual forming tubes, dual vertical seals and cross-seal jaw. Rated up to 30 cycles per minute depending on materials, application and machine configuration. Maximum film width of 200mm. Maximum roll diameter of 400mm.

OAD: 68"L x 46"W x 99"H

Get a Free Quote Call: 630-629-9900

Khs Usa, Inc. Form & Fill Auger IMF 8-16 SERVO

  • Manufacturer: Khs Usa, Inc.
  • Model Number: IMF 8-16 SERVO
  • Frain Number: R33530

KHS / Bartelt Innopouch, Model IMF8-16, Automatic, left to right, horizontal, intermittent motion, servo driven, flexible pouch, form, fill, seal machine rated from 20 to 110 pouches per minute – depending on materials and application. Capable of doing (3) sided seal, open gusset and fin pouches. Pouch size range: 2" to 7-3/4" in Width; 2" to 9-1/2" in Height with proper change parts. Equipped with chain fed pouch conveyor and has (16) clip pouch stations set on 8" centers, end roll stock fed with film roll specs of 24" maximum OD, 21" maximum web width on 3" OD cores. Film registration sensor, adjustable gusseted film forming plow, side seal station, film tension rolls, knife cut off station, vacuum pouch opener, (16) rotary fill funnel stations set on 8" centers, with (2) Spee Dee Model 3600S servo driven auger fillers with product settler, top pouch cleaner, pre heat with top heat seal and cooling pouch stations with vacuum suction cup discharge. Control panel has A/B PLC controls and A/B touchpad controller with drive / speed, start / stop, jog, reset and e-stop controls, with vacuum pump, interlocking safety doors and statis light bar. Mounted on heavy duty multi-leg frame.
Unit suitable for a wide range of food and non-food products, including drink mixes, rice, beans, spices, noodles, towelettes, viscous liquids and powders.

Markem-Image SmartData X40 Coder Available at Extra Cost.

OAD: 300" L x 60" W x 92" H

Get a Free Quote Call: 630-629-9900

Bartelt Form & Fill Auger IMF6.5

  • Manufacturer: Bartelt
  • Model Number: IMF6.5
  • Frain Number: 5H7310

Bartelt Model IMF6.5, Automatic, intermittent motion, horizontal, form, fill, seal machine rated from 40 to 100 pouches per minute – depending on materials and application. Pouch size range: 2" to 4-3/4" in Width; 2" to 6" in Length. Equipped with height adjustable gusseted film forming plow, side seal station, 9-1/2" high film tension rolls, knife cut off station, vacuum pouch opener, 14 rotary head fill station set on 6-1/2" centers, single head auger filler buckets, top heat seal stations and recipricating suction cup pic n place discharge. Control panel has Siemens Simatic 505 PLC controller with touchpad controller, and variable heat seal controls, with interlocking safety guarding. Film Specifications: up to 22" in Width; up to 18" in diameter with a max 3" OD core. Mounted on heavy duty frame.

Optional filler, zipper attachment, coder, tear notch, available at additional cost.

OAD: 228" L x 48" W x 67" H

Get a Free Quote Call: 630-629-9900

Viking Masek Global Packaging Form & Fill Auger E250

Viking Maeck Global Packaging Tech, Model E250, Vertical form, fill, seal machine, rated from 10 to 70 cycles per minute with number of bags or pouches – depending on materials, application and machine configuration. All Stainless steel construction. Bag or pouch size range of: 2½" to 15" long x 2½" to 11" wide. Film Roll size of: 21" wide maximum. Equipped with All Fill single head auger filler and product hopper, fill tube, dual side belt assist, 12" wide hot knife seal jaws with 16" long lap seal bar and product discharge chute. Control panel has touch pad controller and panel view with start, stop, reset and e-stop push buttons. Mounted on stainless steel frame with height adjustable legs and interlock safety doors.

OAD: 72" L x 48" W x 62" H Without Auger Filler
115" H With Auger Filler

Get a Free Quote Call: 630-629-9900

Bartelt Form & Fill Auger IM712

  • Manufacturer: Bartelt
  • Model Number: IM712
  • Frain Number: R32180

Bartelt Model IM712, Automatic, horizontal, mechanical driven, intermittent motion, form, fill, seal machine with single head auger filler rated from 12 to 60 pouches per minute – depending on materials and application. Pouch size range: 2" to 5-3/4" in Width; 2" to 9-1/2" in Length. Equipped with chain feed pouch conveyor and has 12 stations set on 7" centers, forming plow, with tension rollers, pouch side seal and cut-off stations, suction cup pouch opener, single head auger filler with controller, spinning wheel top pouch dust-off and heat seal bar with pouch pick-off station. 18" OD maximum film roll, with 20" maximum web width, on 1" OD core. Control panel has PLS controls with auger, start, run, jog, registration, top, bottom and side heat seal control switches with start, stop e-stop and web feed push button controls. Mounted on heavy duty frame with cage style safety guarding.

OAD: 198" L x 48" W x 85" H

Get a Free Quote Call: 630-629-9900

Bartelt Form & Fill Auger IM714

  • Manufacturer: Bartelt
  • Model Number: IM714
  • Frain Number: R29640

Bartelt Model IM714, Fully automatic intermittent motion form, fill, seal, machine rated from 10 to 100 pouches per minute – depending on materials and application. Pouch size range: 2" to 9-1/2" in Height 2" to 5-3/4" in Width and 2" thick. Equipped with 14 stations on 7" centers, double auger fillers with product settlers and pouch shaker stop, cleaning and sealing stations with vacuum pick-off. Controller has PLS 5000 Electro cam controls. Mounted on heavy duty frame with interlock safety guarding. Last running instant Oatmeal.

Emboss coder in seal available.

OAD: 216" L x 50" W x 100" H

Get a Free Quote Call: 630-629-9900

Bartelt Form & Fill Auger SLITTER

  • Manufacturer: Bartelt
  • Model Number: SLITTER
  • Frain Number: 5G8205

7" wide x 58" long (2) chain lugged conveyor. Equipped with fixed pockets on 9" centers, 3½" OD cutting wheel section and (4) suction cup reciprocating pick and place discharge. Mounted on (4) legs with leveling legs and a 31" to 35" infeed / discharge range.

OAD: 77"L x 29"W x 65"H

Get a Free Quote Call: 630-629-9900

Southern Packaging Form & Fill Auger SPM 10-12

Southern Packaging, Model SPM 10-12, automatic, horizontal, intermittent motion, form, fill, seal machine. Rated from 10 to 100 cycles per minute – depending on materials, application and machine configuration. Pouch size range: 2" to 8¾" in Length; 2" to 9½" in Height. Equipped with splice station with auto web tracking, zipper unwind, hole punch with scrap collection, lower and upper crush for gusset pouches, pouch feed chain system set on 10" centers, forming plow, film tension rollers, registration, side seal with parallel mounting bars, cut-off station, (12) clip stations, suction cup style pouch opener, Mateer servo auger filler, top heat seal bar, top seal cooling bar and pouch pick-off station. Film Specifications: 20" OD maximum film roll, with 28" maximum web width, on 3" OD core. Control panel with an AB controller, AB PanelView 550 touch pad display, push button start/stop and digital temperatue controllers. Mounted on heavy duty base frame.

OAD: 311"L x 58"W x 91"H

Get a Free Quote Call: 630-629-9900

Bartelt Form & Fill Auger IM914

  • Manufacturer: Bartelt
  • Model Number: IM914
  • Frain Number: R17701

Bartelt Model IM9-14, horizontal form, fill, seal machine rated from 20 to 70 packages per minute – depending on materials and application. Package size range: 2" to 9-1/2" in Height; 2" to 7-3/4" in Width; up to 2" Thick. Equipped with bottom seal station, emboss date coding, variable frequency speed controller, registration, vacuum openers, Dual Bartelt auger fillers and vacuum pick off discharge. Mounted on frame with Lexan safety guarding.

Gusseting attachment available for additional cost.

OAD: 22′ x 5′ x 8’H

Get a Free Quote Call: 630-629-9900