Used Oscilating Equipment
8 Granulator machines IN-STOCK!

More Photos: 2

Automatic rotating granulator rated up to 1500 lbs per hour - depending on materials and application. Equipped with a 1 ft³ stainless steel product hopper measuring 16-1/2" in Length x 14" in Width x 8" in Height, six stainless steel hexagonal shaped breaker bars measuring 13" long x 1" diameter, a removable, stainless steel, 12" long x 16" wide bottom discharge chute with a 4" Diameter discharge and a 29-1/2" floor clearance, and push button controls. Mounted on casters. Screens per application.

OAD: 43"L x 45"W x 55"H

Rotary, wet granulator, designed for the extrusion of wet type material in preparation of granulation, capable of up to 800 lbs an hour (depending on application). (12" dia x 27" L) S/S product hopper with 38" floor clearence, (6) blade single rotor capable of 22 rpm, has a 3 hp (2) belt motor drive, push botton start/stop, and mounted on platform base with casters for mobility. Last running in a pharmaceutical operation.

OAD: 48"L x 36" W x 60" H

More Photos: 3

Vector Model CF-360 304 S/S Granulator is capable of handling 1.5 to 4kg (bulk density 0.7) of product. Charging capacity: 0.75 - 2kg. Rotor diameter: 360mm. Rotor direction: Clockwise. Rotor speed (variable): 40-400rpm. Main application is agglomeration, granulating, and coating for any kind of powder. The specially designed rotor is installed in a large stationary cylinder (stator) and a bed of powders, granules or pills forms a fluidizing doughnut ring along the wall of the stator with a rope twisting like motion which is created by joint forces of centrifugal force, rotating speed, gravity and fluidization air directed through the slit. When binding or coating solution and powders are sprayed onto this fluidizing twisted doughnut ring of the bed, they are mixed and develop very quickly and uniformly into the ring of the bed and therefore powders, granules or pills can be granulated, agglomerated or coated uniformly within a limited time. Air from high pressure blower is directed to the chamber through heat exchanger to the slit (a 300-500 micron opening) which helps eliminate clogging of powders and granules in the chamber. Last ran in a food application. OAD: 8'L x 3'W x 6'H

Oscilating granulator has a stainless steel hopper that is 14" x 15" at the infeed. 14" long rotor with a safety grate. Stainless Steel screen support mechanism with one screen. Discharge height of 40". Control box with starter and on/off switches. Self contained oil system. Unit mounted on casters. Capacity depends on materials processed & desired objective. Last running in a pharmaceutical operation. Screens available from OEM: #4/6/8/10/12/14/16/18/20/24/30/40.

OAD: 54" H x 32" W x 36" L

More Photos: 2

Solvent recovery system consists of 100 gallon solvent recovery tank and 6 pressure pots was last running with a 100 litre fluid bed granulator system.

Colton 561 Rotary Wet Granulator Designed For The Extrusion Of Wet Type Material And Intimate Mixing Of Color Granulation. Unit Equiped With S/S Hopper Which Measures 40" From Floor To Discharge, And Has A 12"Diameter X 8 1/2" High Top Opening. High Capacity Six Bladed Rotor Has A Final Output Of 22 Revolutions Per Minute. Currently Fitted With 1/16" Mesh Screen. Mounted On Four Casters.

More Photos: 2

Automatic Continuous Motion Rotary Wet Granulator Is Designed For The Extrusion Of Wet Type Material. Granulator Is Equipped With Six Blade 304 Stainless Steel Rotor That Makes 22 Revolutions Per Min For High Capacity. Unit Has A 12" Dia X 8-1/2"H Hopper. Unit Is Belt Driven And Has A Discharge That Measures 34" From The Floor. Equipped W/Casters.

OAD: 37"L X 32"W X 56"H

Dry granulator with drive motor used to granulate tablet slugs and pellets. When using hard sligs, from 2 to 2.5mm thick, the following granulation will be obtained: 45%-16mesh,25%-24mesh,10%-70mesh,20%-powder.Infeed opening of 9" L x 3"W. OAD: 21"L x 13" W x 15"H