Vertical Machines

Used Vertical Equipment

The process for vertical paste type mixers are usually a batch operation where materials are fed into the mixer along with appropriate liquids and allowed to mix for the consistency required for making the products.

Materials are discharged out of the bottom of the mixer and pumps are used to facilitate removal of this normally stiff products. There are also vertical paste mixers that can be used in a continuous manner to enable dry powders to be metered into the mixer and the appropriate liquids are also metered into the mixer to achieve the required consistency.

Vertical Equipment In Stock

Fryma Mixer Paste Vertical VME 700 www.repassa.com

  • Manufacturer: Fryma
  • Model Number: VME 700
  • Frain Number: 5E0084

700 Liter, 304 stainless steel processing vessel. Fully jacketed, Jacket rated to 45 psi and vacuum rated. Three independent mixing / blending devices: side wall scraper, high shear disperser and an adjustable homogenizer / colloid mixer. Dome top with lock down cover and pneumatic lift , 9" diameter port, 5-1/2" diameter sight port, and 2-1/2" top inlet. Dish bottom with 3-1/2" diameter center bottom discharge at 16" floor clearance. Control panel for disperser, colloid homogenizer mill and side scraper.

OAD: 128" L x 65" W x 94" H

Get a Free Quote Call: 630-629-9900

J H Day Mixer Paste Vertical NAUTA MBX 525

  • Manufacturer: J H Day
  • Model Number: NAUTA MBX 525
  • Frain Number: 5D6631

J H Day Model NAUTA MBX 525, 52.5 cu. ft. (392 gallon), 304 stainless steel, single wall, vertical paste mixer with a 12" diameter bottom support screw. Features three distinct intermixing actions: the screw turning on its axis, the screw orbiting the tank, and the screw spiralling the material upward. Equipped with three 6" diameter top ports, one 10" diameter top port, one 4" diameter top port, a 17" wide by 46" long top acess panel, and a 6 1/2" diameter side bottom circular stopper discharge. Powered by a Reliance 10 hp motor.

OAD: 79"L x 79"W x 130"H

Get a Free Quote Call: 630-629-9900

Oakes Mixer Paste Vertical 60SMV75I

  • Manufacturer: Oakes
  • Model Number: 60SMV75I
  • Frain Number: 5J1190

Oakes Model 60SMV751, Stainless steel, continous motion, slurry mixer and transfer system rated up to 440 gallons or 2,000 lbs of product per load with 15 minutes or less mix times – depending on materials, application and machine configuration. Equipped with 60" ID x 36" straight wall stainless steel product mix tank with pnuematic flip up cover and magnetic safety switch with (2) stationary pull out stator assemblies one each side and inner rotating mixing blades with bottom platform mounted motor drive. Waukesha Model 200U1PD transfer pump has 4½" OD / 4" ID inlet / outlets ports with twin wing rotors, O-Ring seals, 10 Hp motor drive to ensure quick and total transfer of product and now mixer is ready to receive another batch. Control panel has A/B controller and panel view with digital readout, rotor, pump and e-stop push button controls. A/C starter package and A/B poweflex VFD. Mounted on 102" long x 79" wide stainless steel platform with legs.
Ideal for icing, frosting, slurries and more.

OAD: 104" L x 79" W x 108" H

Get a Free Quote Call: 630-629-9900

Amf Glen Mixer Paste Vertical 74-36

  • Manufacturer: Amf Glen
  • Model Number: 74-36
  • Frain Number: 5H9730

Amf Glen, Model 74-36, dough mixer – with pounds of product per hour – depending on materials, application and operator dexterity. Equipped with four wing beater agitation, 340 qt bowl, variable speed gearbox, timer dial, push button start/stop and push button bowl up / bowl down.

OAD: 85"L x 51"W x 82"H

Get a Free Quote Call: 630-629-9900

Ross Mixer Paste Vertical CDA50 Ross 65 gallon paste mixer

  • Manufacturer: Ross
  • Model Number: CDA50
  • Frain Number: R30083

Ross Model CDA50 vertical jacketed mixer with gallons of product per hour – depending on materials and application. 304 stainless steel with 65 gallon total and 50 gallon working capacities. Equipped with full vacuum up to 29.50 Hg, jacketed pressure rated up to 100 psi. with variable high speed, independently driven, high speed hear homogenizing and scrape surface agitation. Has 3-1/4" sight port, temperature probe and 2" ball valve discharge and vacuum pump. Start, stop and e-stop push button controls.

OAD: 92" L x 36" W x 74" H

Get a Free Quote Call: 630-629-9900

Ross Mixer Paste Vertical LDM2

  • Manufacturer: Ross
  • Model Number: LDM2
  • Frain Number: R30084

Ross Model LDM2, 2 gallon, jacketed, double planetary mixer with orbital speeds from 20 to 100 rpm and pounds of product per hour – depending on materials and application. Equipped with 100 psi steam jacket and vacuum cover rated up to 29" Hg vacuum, model DS-2 hydraulic discharge press, (2) 3/4" ID threaded vacuum ports, vacuum gauge, (2) 3" inlets/sight glasses, safety switch, temperature probe port and Sterling variable speed gear reducer. Mounted on base frame with casters.

OAD: 42" L x 22" W x 56" H

Get a Free Quote Call: 630-629-9900

Ross Mixer Paste Vertical VB001

  • Manufacturer: Ross
  • Model Number: VB001
  • Frain Number: R30052

Ross, Model VB-001, 1 ft³, 304 stainless steel, jacketed and vacuum rated, vertical cone blender. Vessel dimensions: 22" top diameter; 29" deep cone. Equipped with a clamp down cover, electric cone lift powered by a ½ hp drive, (1) 3¾"OD / 3"ID I-Line style charge port, (1) 2¾"ID sight glass, dual action Nauta mixer with .33 hp arm drive / ½ hp screw drive and 2" NPT bottom discharge valve with 17" clearance (with cone in the up position). Control panel with independent push button start / stop and variable speed control dials for orbital arm and screw and a raise / off / lower switch for the lift.

Jacket: 15 PSIG
Vacuum: 29.5 HG

OAD: 53"L x 36"W x 80"H

Get a Free Quote Call: 630-629-9900

Littleford Mixer Paste Vertical W-10-B

  • Manufacturer: Littleford
  • Model Number: W-10-B
  • Frain Number: 5G9706

Littleford, Model W-10, high intensity ¼ ft³ working capacity lab mixer with number of pounds of product per hour – depending on materials and application. Equipped with stainless steel contact parts, jacketed bowl 9" diameter x 8½" deep,hinged top cover with spray nozzle, 2 tier blade, 1½" diameter outlet with manual plug valve and 41" ground clearance and driven by 3 hp motor. Control panel with push button start / stop and variable speed adjustment.

MAWP: 125 PSI @ 400°F

OAD: 35"L x 26"W x 62"H

Get a Free Quote Call: 630-629-9900

GLASS GMBH & Co Mixer Paste Vertical VSM/F 150

GLASS Model VSM/F 150, 150 liter, stainless steel, vertical, low pressure jacketed vacuum mixer with steam injection. Pounds of product per hour – depending on materials, application, machine configuration and operator dexterity. Equipped with __" ID x __" Deep stainless steel mixing bowl, with 90° pnuematic tilt, automatic open and close bolt down cover, mixing arm and side wall scrapers with hygienic seals, 5 Hp motor drive and integrated vacuum pump. Control panel has touch panel controller with process data recording and run left / right mixing baffle, motor fast, slow with vacuum on / off switch and stop push button controls. Mounted on stainless steel base frame with casters and leveling legs.
Used for conveience foods, delicacies salad dressings and marinates.

OAD: 108" L x 48" W x 62" H

Get a Free Quote Call: 630-629-9900

GLASS GMBH & Co Mixer Paste Vertical VSM/F 300

GLASS Model VSM/F 300, 300 liter, stainless steel, vertical, low pressure jacketed vacuum mixer with steam injection. Pounds of product per hour – depending on materials, application, machine configuration and operator dexterity. Equipped with 29" ID x 29" Deep stainless steel mixing bowl, with 90° pnuematic tilt, automatic open and close bolt down cover, mixing arm, side wall scrapers with hygienic seals, 5 Hp motor drive and integrated vacuum pump. Control panel has touch panel controller with process data recording and run left / right mixing baffle, motor fast, slow with vacuum on / off switch and stop push button controls. Mounted on stainless steel base frame with casters and leveling legs.
Used for convience foods, delicacies salad dressings and marinates.

OAD: 90" L x 48" W x 62" H

Get a Free Quote Call: 630-629-9900

GLASS GMBH & Co Mixer Paste Vertical VSM 300

GLASS Model VSM 300, is a 300 liter, stainless steel, vertical, vacuum mixer and meat marinating machine with pounds of product per hour – depending on materials, application, machine configuration and operator dexterity. Equipped with 30" OD x 28" Deep stainless steel mixing bowl, with 90° tilt, and automatic open and close bolt down lid with bottom mixing arms and side wall scrapers with hygienic seals and low pressure cooling jacket with 1-1/4" OD threaded side jacket ports and 5 Hp motor drive with integrated vacuum pump. Control panel has touch panel operation with process data recording and run left / right mixing baffle, motor fast, slow and stop push button controls with vacuum on / off switch. Mounted on stainless steel base frame with leveling legs.

OAD: 102" L x 48" W x 62" H

Get a Free Quote Call: 630-629-9900

Ross Mixer Paste Vertical DPM-40

  • Manufacturer: Ross
  • Model Number: DPM-40
  • Frain Number: R29011

Ross Model DPM-40 Series lll, 40 Gallon, 316 stainless steel, sanitary design, atmospheric, double planetary batch mixer with pounds of product per hour – depending on materials and application. Equipped with hydraulic lift mixing head and has 15 Hp motor drive, with self contained pressurized air / oil tank with dry air, dual rectangle mixing blades for low and high viscosity applications suitable for wet or dry blending and has a capacity from 5 to 40 gallons and rated for 10,000 to 8 million cps. 8" OD hinged sight / charge port with 6" OD Tri Clover atomizing nozzle port, (2) 2" OD sanitary top and 3" OD light port. Control panel has PLC controller with mixer start, stop, speed decrease, increase, lift raise, lower, light on, off with start, stop, and e-stop controls. 24" in diameter; 24" straight wall stainless steel mixing can with casters. Mounted on heavy duty stainless steel forkable base frame.

OAD: 88" L x 60" W x 83" H

Get a Free Quote Call: 630-629-9900