Band Machines

Used Band Equipment

Premade bags are ideal for many packing operations. They can be hand or machine loaded but then the open top needs to be sealed. Band sealers are just the thing for this. They will work with a variety of bag materials provided always that the inside of the bag material is heat sealable.

bag-band-sealers

The band sealer consists of a conveyor to support the bag and a pair of thin, horizontal fiberglass belts, facing each other and running in the same direction. Heating and cooling sections are located behind and in direct contact with the belts on either side.

The product is placed on a conveyor that is running in synchronization with the sealer. The top portion of the bag is manually straightened to eliminate wrinkles and guided between the two belts. As the belts grip the bag, the operator releases it and lets the sealer and conveyor do the rest of the work.

As the bag enters the heated section of the sealer, heat is transferred through the belts to the bag. Springs press the belts and plates against the bag with a controlled force. The combination of belt pressure, heater temperature, and speed (dwell time) determine the quality of the seal.

Immediately after sealing, the seal is still hot and has not yet set up. Any stress on it at this point could result in failure. After leaving the heated section of the sealer, the bag, still gripped by the sealing belts and supported by the conveyor enters a cooling section. This consists of cooling blocks, cooled by circulating air around them. As the bag is carried through the cooling section, the seal is cooled to near room temperature and takes a permanent set.

The conveyor, moving at the same speed holds the bag straight while in the sealer.

An optional feature on some bag sealers is a cut-off to remove excess bag material above the seal.

Another option is an integrated coder to apply a lot number, expiration date or other variable information. This can be debossing wheel or an inkjet printer.

Contact Us

Band Equipment In Stock

Bandrite Sealer Bag Band 6000

  • Manufacturer: Bandrite
  • Model Number: 6000
  • Frain Number: R38260

Bandrite Model 6000 RTL, Automatic, continuous motion, band style bag sealer rated from 250 to 750 inches per minute with number of bags – depending on materials, application and operator dexterity. Equipped with angled, tilt away sealing head has ¾" wide heat sealing and cooling bars with non-marking carrier belts, adjustable running speeds and temperature controls up to 600°F, bag trim station, 1 line coder and hand crank height adjustable for different size bags. Mounted over 6" wide x 100" long stainless steel conveyor with variable speed controller powered by ¼ Hp drive.

OAD: 108" L x 36" W x 59" H

Get a Free Quote Call: 630-629-9900

Bandrite Sealer Bag Band 6000

  • Manufacturer: Bandrite
  • Model Number: 6000
  • Frain Number: R37943

Bandrite Model 6000, Automatic, in line, band style bag sealer rated from 0 to 750 inches per minute with number of bags – depending on materials, application and operator dexterity. Equipped with angled sealing tilt away head has ¾" wide heat sealing and cooling bars with non-marking carrier belts, adjustable running speeds and temperature controls up to 600 Deg F. bag trim station, 1 line coder and hand crank height adjustable for different size bags. Heat and cool down on / off, temperature controller and speed control dial. Mounted over 6" wide x 96" long stainless steel belt conveyor with adjustable guides and powered by ¼ Hp drive.

OAD: 96" L x 36" W x 59" H

Get a Free Quote Call: 630-629-9900

Bandrite Sealer Bag Band 6000

  • Manufacturer: Bandrite
  • Model Number: 6000
  • Frain Number: R37942

Bandrite Model 6000, Automatic, in line, band style bag sealer rated from 0 to 750 inches per minute with number of bags – depending on materials, application and operator dexterity. Equipped with angled sealing tilt away head has ¾" wide heat sealing and cooling bars with non-marking carrier belts, adjustable running speeds and temperature controls up to 600 Deg F. bag trim station, 1 line coder and hand crank height adjustable for different size bags. Heat and cool down on / off, temperature controller and speed control dial. Mounted over 6" wide x 96" long stainless steel belt conveyor with adjustable guides and powered by ¼ Hp drive.

OAD: 96" L x 36" W x 59" H

Get a Free Quote Call: 630-629-9900

Bandrite Sealer Bag Band 6000

  • Manufacturer: Bandrite
  • Model Number: 6000
  • Frain Number: R30141

Bandrite, Model 6000, Right to left, automatic, continuous motion, stainless steel, band style, bag sealer. Rated from 0 to 750 inches per minute with number of product – depending on materials, application and operator dexterity. Equipped with bag trim station, 1 line coder, ¾" wide heat sealing bar and cooling bar, angled sealing and tilt away drive head, non-marking carrier belts with adjustable running speeds and temperature controls up to 600 Deg F. Hand crank height adjustable for different size bags. Mounted over 6" wide x 100" long belt conveyor with adjustable guide rails and powered by ¼ Hp drive.

OAD: 110"L x 40"W x 59"H

Get a Free Quote Call: 630-629-9900

Bandrite Sealer Bag Band 6000

  • Manufacturer: Bandrite
  • Model Number: 6000
  • Frain Number: R37940

Bandrite Model 6000, Automatic, in line, band style bag sealer rated from 0 to 750 inches per minute with number of bags – depending on materials, application and operator dexterity. Equipped with angled sealing tilt away head has ¾" wide heat sealing and cooling bars with non-marking carrier belts, adjustable running speeds and temperature controls up to 600 Deg F. bag trim station, 1 line coder and hand crank height adjustable for different size bags. Heat and cool down on / off, temperature controller and speed control dial. Mounted over 6" wide x 96" long stainless steel belt conveyor with adjustable guides and powered by ¼ Hp drive.

OAD: 96" L x 36" W x 59" H

Get a Free Quote Call: 630-629-9900

Bandrite Sealer Bag Band 6000

  • Manufacturer: Bandrite
  • Model Number: 6000
  • Frain Number: R37941

Bandrite Model 6000, Automatic, in line, band style bag sealer rated from 0 to 750 inches per minute with number of bags – depending on materials, application and operator dexterity. Equipped with angled sealing tilt away head has ¾" wide heat sealing and cooling bars with non-marking carrier belts, adjustable running speeds and temperature controls up to 600 Deg F. bag trim station, 1 line coder and hand crank height adjustable for different size bags. Heat and cool down on / off, temperature controller and speed control dial. Mounted over 6" wide x 96" long stainless steel belt conveyor with adjustable guides and powered by ¼ Hp drive.

OAD: 96" L x 36" W x 59" H

Get a Free Quote Call: 630-629-9900

Bandrite Sealer Bag Band 6000

  • Manufacturer: Bandrite
  • Model Number: 6000
  • Frain Number: R34280

Bandrite, Model 6000, Right to left, automatic, continous motion, in line, band style, bag sealer rated from 0 to 750 inches per minute with number of bags – depending on materials, application and operator dexterity. Equipped with angled sealing tilt away head has ¾" wide heat sealing and cooling bars with non-marking carrier belts, adjustable running speeds and temperature controls up to 600 Deg F. bag trim station, 1 line coder and hand crank height adjustable for different size bags. Heat and cool down on / off, temperature controller and speed control dial. Mounted over 6" wide x 96" long stainless steel belt conveyor with adjustable guides and powered by ¼ Hp drive.

OAD: 96" L x 36" W x 59" H

Get a Free Quote Call: 630-629-9900

Bandrite Sealer Bag Band 6000

  • Manufacturer: Bandrite
  • Model Number: 6000
  • Frain Number: R34281

Bandrite Model 6000, Automatic, in line, band style bag sealer rated from 0 to 750 inches per minute with number of bags – depending on materials, application and operator dexterity. Equipped with angled sealing tilt away head has ¾" wide heat sealing and cooling bars with non-marking carrier belts, adjustable running speeds and temperature controls up to 600 Deg F. bag trim station, 1 line coder and hand crank height adjustable for different size bags. Heat and cool down on / off, temperature controller and speed control dial. Mounted over 6" wide x 96" long stainless steel belt conveyor with adjustable guides and powered by ¼ Hp drive.

OAD: 96" L x 36" W x 59" H

Get a Free Quote Call: 630-629-9900

Bandrite Sealer Bag Band 6000

  • Manufacturer: Bandrite
  • Model Number: 6000
  • Frain Number: R34181

Bandrite Model 6000, Automatic, in line, band style bag sealer rated from 0 to 750 inches per minute with number of bags – depending on materials, application and operator dexterity. Equipped with angled sealing tilt away head has ¾" wide heat sealing and cooling bars with non-marking carrier belts, adjustable running speeds and temperature controls up to 600 Deg F. bag trim station, 1 line coder and hand crank height adjustable for different size bags. Heat and cool down on / off, temperature controller and speed control dial. Mounted over 6" wide x 96" long stainless steel belt conveyor with adjustable guides and powered by ¼ Hp drive.

OAD: 96" L x 36" W x 59" H

Get a Free Quote Call: 630-629-9900

Bandrite Sealer Bag Band 6000

  • Manufacturer: Bandrite
  • Model Number: 6000
  • Frain Number: R34180

Bandrite Model 6000, Automatic, in line, band style bag sealer rated from 0 to 750 inches per minute with number of bags – depending on materials, application and operator dexterity. Equipped with angled sealing tilt away head has ¾" wide heat sealing and cooling bars with non-marking carrier belts, adjustable running speeds and temperature controls up to 600 Deg F. bag trim station, 1 line coder and hand crank height adjustable for different size bags. Heat and cool down on / off, temperature controller and speed control dial. Mounted over 6" wide x 96" long stainless steel belt conveyor with adjustable guides and powered by ¼ Hp drive.

OAD: 96" L x 36" W x 59" H

Get a Free Quote Call: 630-629-9900

Bandrite Sealer Bag Band 6000

  • Manufacturer: Bandrite
  • Model Number: 6000
  • Frain Number: R32082

Bandrite Model 6000, Right to left, automatic, continuous motion, band style, bag sealer. Rated from 0 to 750 inches per minute with number of product – depending on materials, application and operator dexterity. Equipped with bag trim station, 1 line coder, ¾" wide heat sealing and cooling bar, angled sealing and tilt away drive head, non-marking carrier belts with adjustable running speeds and temperature controls up to 600 Deg F. and hand crank adjustable for different size bags. Mounted over 6" wide x 96" long belt conveyor with adjustable guides and powered by a ¼ Hp drive.

OAD: 110" L x 36" W x 59" H

Get a Free Quote Call: 630-629-9900

Bandrite Sealer Bag Band 6000

  • Manufacturer: Bandrite
  • Model Number: 6000
  • Frain Number: R32080

Bandrite, Model 6000, Right to left, automatic, continuous motion, band style, bag sealer rated from 0 to 750 inches per minute with number of product – depending on materials, application and operator dexterity. Equipped with bag trim station, 1 line coder, ¾" wide heat sealing and cooling bar, angled sealing and tilt away drive head, non-marking carrier belts with adjustable running speeds and temperature controls up to 600 Deg F. and hand crank adjustable for different size bags. Mounted over 6" wide x 96" long belt conveyor with adjustable guides and powered by ¼ Hp drive.
Coder requires seprate type.

OAD: 110" L x 36" W x 59" H

Get a Free Quote Call: 630-629-9900