Used Accessories Equipment
29 Tube machines IN-STOCK!

More Photos: 3

IWKA TU100, Automatic, stainless steel, plastic or laminate tuber filler, sealer rated from 40 to 100 tubes per minute - depending on materials and application. Tube size: 11mm to 50mm in Diameter; 52mm to 250 mm in Height. Fill Volume: 3.5 cm³ to 377 cm³. Equipped with 100 liter stainless steel product hopper with agitation, cassette tube magazine, tube depressor, 12 pocket rotarty turret, registration, bottom up fill, no tube / no fill, two hot air sealing stations, cooling station, trim station with blow off scrap discharge, stainless steel tube discharge chute, variable seal temperature controls and interlocking safety guarding. Mounted on height adjustable legs.

OAD: 60" L x 48" W x 108" H

More Photos: 2

Inline, tube filler, sealer, trimmer with speeds - depending on materials and applicatoion. 5 stations unit indexes pucks with single tubes into the first 2 stations which are bottom up fill stations, to a pre-heat seal station, to a seal and cool station and then to a trim station. Tubes are transfered on a 118" long x 6-1/2" wide 2 belt conveyor system with bosch puck holders and a A/B Logix5550 controller, with A/B panel view 1000 swing arm controls and has test and run switch, three e-stops, safety guarding and tubular frame with lock down legs and casters, inline roller in feed and curved roller discharge conveyors.

OAD: 120" L x 60" W x 80" H

More Photos: 2

Saga FS22P, Semi automatic, plastic tube filler and sealer . Tube size range: 1/4" to 2-3/16" in Diameter. Fill size: up to 9oz. Equipped with a 2.5 ft³ stainless steel product hopper, air tube cleaner, twin piston filler, fill nozzle, 22 pocket rotary turntable, hot jaw tube sealer, water cooled seal jaws and variable temperature and speed controls. Stainless steel contact parts. Mounted on height adjustable legs. Speed dependant on materials and application. Change parts required to accommodate size range.

OAD: 84" L x 60" W x 84" H

More Photos: 2

Arenco GAN, Automatic, 2 head, plastic tube filler, sealer rated from 40 to 120 tpm - depending on materials and application. Tube size: up to 1-1/2" in Diameter; up to 7-1/4" in Height. Equipped with magazine, 38 pocket turret, cleaner, registration, stainless steel product hopper, 4-1/2" Long x 3/8 ID pistons, with 1/4" OD nozzles, bottom up fill, heat sealing and cooling jaw assemblies with chiller. PLC controller.

80" L x 48" W x 70" H

More Photos: 2

Unipac Silver 80, Automatic, metal tube filler, sealer rated from 20 to 75 tubes per minute - depending on materials and application. Tube size range: 10mm - 40mm in Diameter; 2" - 10" in Height. Fill range: 1.5 - 450ml with proper change parts. Equipped with 20" ID x 24" deep agitated product hopper and compression auger, 24" diameter, 12 station turntable, 25" x 28" tube magazine, photo eye registration, tube cleaner, no tube / no fill, bottom up fill, 400 ml piston, 5/8" OD positive cut off nozzle, two crimping and folding stations, emboss coder, ejection station with chute and interlocked safety guarding. Change parts requires to accommodate size range. All 316 stainless steel contact parts.

OAD: 53" L x 48" W x 89" H

More Photos: 2
Play Video

Kalix KX10B, Semi-automatic, 16 station rotary metal tube filler, crimper rated from 10 to 40 tubes per minute - depending on materials and applications. Tube size range: up to 2-1/2" in Diameter; and up to 10" in Height. Fill range: from 30cc - 463cc. Equipped with 17 gallon, stainless steel heated product hopper with auger agitator, temp probe, no tube / no fill, bottom up fill, suck back nozzle, double fold, with 2 crimping / folding stations, emboss coder and ejection station. Currently set with a 1-1/2" ID x 9" L piston, with 5/8" OD, 1/2" ID product nozzle. Change parts required to accommodate size range.

OAD: 60" L x 30" W x 88" H

More Photos: 2

Automatic, 10 station rotary tube filler, sealer capable of speeds from 30 to 70 tpm - depending on materials and application. Fill range: 2cc - 250cc, tube size range: 10mm - 50mm Dia x 60mm - 265mm L, 10 station rotary, all stainless steel construction, has 30" L x 19" W empty tube magazine capable of holding up to 2000 tubes, with registration, product pipline feed manifold in lieu of product hopper, 1/2" OD fill nozzle, bottom up fill, crimping heads for aluminum tubes, Sysmac CQMI Omron PCU touch pad controller with LED readout and interlocking safety guarding and was designed to fill high viscosity fills such as creams, paste, silicone, putty, grease and others.

OAD: 84" L x 42" W x 84" H

More Photos: 2
Play Video

Kalix KX60, Semi-automatic, 16 station, rotary plastic tube filler, and sealer rated at speeds up to 50 tpm - depending on materials and application. Maximum tube size range of: 1 1/2" dia x 7" high and a fill range of: 3/4oz - 5.4oz. Has 17 gal, S/S product hopper, diving nozzle, with no tube, no fill, cal rod radiant heat sealing head, and a water cooled seal jaw, with coder and tube ejection station.

OAD: 46" L x 32" W x 72" H

More Photos: 2

Saga FS-22-2, Automatic, double fill, plastic tube filler and sealer capable of 50 to 120 tubes per minute - depending on materials and application. Tubes: 7/16" - 1 1/2" diameter filling two tubes per index or up to 2" diameter filling 1 tube per index. Has 22 tube position rotary disc, 2 1/2 cu.ft. stainless steel jacketed product hopper, two 8 oz product pistons, cam operated tube closing doors after tube fill, heat crimp end plastic tube sealer, air blow to cool crimp seal, tube discharge, stainless steel product contacts, and E-stop. Mounted on steel-it frame. Last running double fill 1 1/4" diameter x 4" high plastic tube.

OAD: 104"L x 67"W x 81"H

More Photos: 2

Tonazzi COLIBRI 1001, Automatic, stainless steel, twin head tube filler rated from 80 to 200 tpm - depending on materials and application. Size range: 3/8" to 1" in Diameter; 2" to 9-3/4" in Height. Fill range: 0.1 oz to 13 oz. Equipped with auto tube feeder, low tube sensor, 12 position carousel, registration, diving nozzles with positive shut-off, no tube / no fill, hot air seal station, trim station, A/B SLC 5/04 PLC and interlocked Lexan guarding.

OAD: 45" L x 68" W x 86" H

More Photos: 2

Arenco AM2000, Automatic tube sealer capable of speeds from 60 to 170 tubes/min. Tube size range: (length) 50 - 250MM (Diam) 16 - 40mm and a fill volume range 3.5 - 300ml w/correct changeparts. Has a dosing accuracy of +/- .1 to .5%. Has dual cassette tube infeed, tube cleaning, bottom up fill, no tube no fill.
OAD: 104"L x 58"W x 88"H

Tonazzi COLIBRI 40, Automatic plastic / laminate tube fill and seal machine rated from 10 to 30 tubes per minute - depending on materials and application. Size range: 10mm to 50mm in Diameter; 50mm to 200 mm in Height. Filling capacity 3 to 240 ml. Equipped with agitated product hopper, bottom up fill, ultrasonic sealer, trim station and Lexan guarding. All stainless steel contact parts. Requires changes parts to accommodate size range.

OAD: 48" L x 48" W x 84" H

Arenco GAB, Semi automatic laminate tube filler/sealer capable of 20 to 60 tubes per minute - depending on materials and application. Fill volume range: 1ml - 240ml. Currently has 55mm dia piston for a .85oz- 8.1oz (25-240 Ml) fill range. Unit has a tube size range: (Length) 45mm - 210mm (Diameter) 10mm-45mm. Equipped with Philips high frequency sealer for laminate tubes, photo registration, trimmer, no tube/no fill, air tube blowout and 3'6"L X 6"W discharge conveyor.

IWKA TU24, Metal sealing jaw capable of sealing a 'saddle' seal.
OAD: 28"L x 12"W x 12"H

More Photos: 3

Arenco GAN, Fully automatic plastic tube filler, capable of speeds from 20 to 120 tubes per minute - depending on materials and containers. Maximum tube range: to 1-1/2" diameter; to 7-1/4" tall. Equipped with dual cassette tube magazines, tube registration, air cleaner station, twin piston filler station, front/back emboss coder, water cooled jaws, tube trim station and bar code verification.

OAD: 9'L x 7'H x 6'W

More Photos: 2

IWKA TU200, Automatic dual head plastic tube filler capable of speeds from 70 to 200 TPM. Has a tube size range: (diam) 11mm - 40mm and (length) 52mm - 250 mm. Fill volume range: 3.5ml - 196ml w/correct size changeparts. Currently equipped w/55mm diam piston for a fill size range: 26.8 ml - 156ml or 30mm diam piston w/fill range: 7.8ml - 45ml (one set included w/machine). Has cassette tube infeed, registration, diving nozzles w/positive shut off. Bottom up fill, fill tubes divie into tube and rise during fill process to reduce air pockets. Has manifold stlye product infeed, three heated sealing stations, one water cooled seal station w/trimmer and automatic tube ejection. Currently set up with pucks for 1" or 25mm diam tubes. has 1/2" diam nozzles. Last ran in cosmetic operation. OAD: 75"L x 60"W x 70"H or 92"H w/product feed tube.

More Photos: 4

IWKA V551TF, automatic twin head metal tube filler capable of speeds from 60 to 160 tubes per minute - depending on materials and application. Has a tube size range: (diam) 12.7mm - 40mm; (length) 70 - 200mm; (filled tube) 3.5mm - 225mm. Fill volume range: 2.0 grams to 225 grams w/change parts. Currently set up with a 40mm diam piston for a fill tange of: 14 - 70 grams. Has a cassette tube automatic infeed, cap tightening and tube cleaning station w/millipore clean air filter. Has HB registration control, AB Plus electro cam, diving nozzle w/positive shut off for drip control. Has a saddle fold type seal with embossing station and automatic eject. Last running a 2 gram tube with 14mm diam in a pharmaceutical operation. Iwka CP 160 cartoner w/tube transfer also available.

OAD: 6'L x 6'W x 6'H

More Photos: 1

IWKA TF23, Manual feed metal tube filler with tube size range: (Diameter) 10mm to 40mm by (Length) 55mm to 220mm. Equipped with print registration, cap tightener, no tube no fill, diving nozzle. Currently fitted with a 55mm diameter piston with a fill range of 30cc to 155 cc. Has 4 crimping and folding stations which last ran a double fold crimp seal. Emboss coder.
(2.5 cc to 250 cc w/proper change parts)

OAD: 54"L x 38"W x 72"H

Chemical & Pharmaceutical GRISONA TE10, Semi automatic table top tube filler and metal tube crimp sealer. TE1000 fill range of: 100ml to 1000ml. Capable of handling all types of containers and tubes up to 300mm (11.8") high. Unit equipped with a electronic controlled volumetric metering pump, 12 liter S/S product hopper, protective housing, and is mounted on base plate with column. System includes matching table top metal tube crimper,

OAD: 31"L x 16"W x 40"H

More Photos: 1
Play Video

Norden AM1000, Automatic metal tube filler/sealer capable of filling from 20 to 100 tubes per minute - depending on materials and application. Tube size range:10mm - 50mm in Diameter; 50mm - 250mm in Length. Equipped with tube magazine, registration, air cleaner, cap tightener, product hopper with level detection, bottom up fill, saddle fold seal, emboss code and lexan guarding.

OAD: 78" L x 57" W x 90" H

Cotuplas RS61, Plastic or laminate tube filler and sealer rated from 10 to 40 tubes per minute - depending on materials and application. Tube size range: 13.5 - 40mm in Diameter x 55 - 230mm in Length. Currently equipped with a 4 oz piston. Rotary 12 puck unit equipped with autocassette empty tube loader, registration, large hopper to piston fill plunge fill with cut-off. Branson 187P ultrasonic tube sealing with 4" wide jaw, with coder in jaw and trim sectons and a cut-off station.

More Photos: 2
Play Video

Arenco 500, Arenco metal tube filler capable of filling from 5 to 50 tubes per minute - depending on materials and application. Size range: tube diameter from 10mm - 50mm; Tube length: 50mm - 250mm; Fill volume 1ml - 300ml. Manual tube load system equipped with stainless steel contact parts, agitation & side scrape hopper, air/vac tube cleaning, cap tightening, bottom up fill, emboss coder, no product / no fill and #2 double fold. Appropriate change parts required for each tube diameter and fill volume.

OAD: 60" l x 42" W x 91" H

Arenco GAP, The Plastic Sealing Unit Is Capable Of Sealing 10 To 50 Tpm Depending On Tube Size, Filling Product, & Quality Of The Tube. Tube Size Range (Including Cap):(Diameter) 10 - 50mm (Length) 65-245 Mm. Units Sealing Patterns Include Straight Rifles, Oblique Rifles, & Plain. Comes With A Rotory Regavolt Which Regulates Voltage Output From 0-120v. Was Last Used In Conjuction With An Arenco Gan.
O/A Dim: 28"L X 26"W X 48"H

Arenco GAP, The Plastic Sealing Unit Is Capable Of Sealing 10 To 50 Tpm Depending On Tube Size, Filling Product, & Quality Of The Tube. Tube Size Range (Including Cap):(Diameter) 10-50 Mm (Length) 65-245 Mm. Units Sealing Patterns Include Straight Rifles, Oblique Rifles, Or Plain. Comes With A Rotory Regavolt Which Regulates Voltage Output From 0-120v. Was Last Used In Conjuction With An Arenco Gan.

Kalix KX10, Tube Filler/Sealer Capable Of 10 To 40 Tubes per Min - depending on materials and application. Tube Size: to 2" in diameter; to 10" in height. Capable Of 2 Tubes/Puck With A Size Range:(Diameter) Two Tubes Not To Exceed 2" Wide (Height) To 10". Set For (2) 7/16"Dia X 2"H Tubes Per Puck. Uses Filamatic Pistons With Fill Range Of Up To 260 CC.
Double Tube Pucks 3/8" Dia And Uses Radiant Heat For Tube Sealing.

Branson 4EB1, Ultrasonic Sealer, Time Range: .020 -.040 Seconds. Tube Size Range: To 60mm Lay Flat. Dual Station Unit Designed To Be Mounted On A Filling Machine. Was Last Used In Conjuntion With An Arenco Gan.

Arenco P40, Plastic Tube Sealer Is Capable Of 60 To 150 Tubes Per Minute - depending on materials and application. Has A Tube Size Range Of 10 - 40mm Diameter. Tube Length Is Determined Upon Filling Machine. Can Be Mounted On The Following Arencomatic Filling Machines: 500p, 600p, 610p, 1000p, And 2000p. 20 Head Unit Is Equipped With A Plain Sealing Pattern.

More Photos: 1

IWKA, S/S, dual agitator with a 610mm (24") overall shaft length. Agitator blades are 432 mm (17" wide) and are adjustable. Item was last used in a 100 L (26 Gallon) hopper used on an IWKA model V50TF metal tube filler.

OAD: H 39" x W 17" x L 22"

More Photos: 2
Play Video

Norden 400, Automatic, hot air, plastic or laminate tube filler / sealer rated from 10 to 40 tubes per minute - depending on materials and application. Tube size range: 3/8" to 2" in Diameter; 2" to 10" in Height. Fill size range: 1 to 10oz Equipped with 15" OD x 24" D stainless steel product hopper, cassette style magazine, tube depressor, 16 pocket rotary turret, registration, bottom up fill, no tube / no fill, hot air sealing system, trim station and interlocking safety guarding. Proper change parts required per application.

60" L x 58" W x 85" H