Neck Bander Machines

Used Neck Bander Equipment

Neck band applicators, or neck banders are designed to apply a heat-shrinkable film band around the neck of a bottle or container. Neck band applicators take a roll of tube film and fold the tube of film counter to its seams to open the tube film. The tube of film is then lower around the neck of the container by the neck band applicator. Neck bands can be either cut by the neck band applicator or can be supplied pre-perforated and simply pulled from the film stock by the neck band applicator. After the film band is placed on the neck of the container, the container passes through a neck band shrink tunnel that shrinks the film of the neck band around the neck and cap of the bottle. Neck bands are designed to be tamper evident so that the film of the neck band must be ruptured if the cap is removed from the container. Neck band applicators have special tooling often referred to as a “bullet” that is designed to open the flat film tube. This “bullet” is placed within the film tube, is held in place by tooling surrounding the film tube, and is specifically sized for the size of neck band. The “bullet” is a change part for neck band applicators. The operation of a neck band applicator is similar to the operation of a body sleeve applicator, though neck band applicators often have machine limitations that prevent them from applying full body sleeves.

Contact Us

Neck Bander Equipment In Stock

Kalish Capper Neck Bander 5408

  • Manufacturer: Kalish
  • Model Number: 5408
  • Frain Number: 5D5094

Neckbander rated from 10 to 80 bands per minute – depending on materials and application. Band length of 1/4" to 7 3/4", a container height range of 1" – 12" and a capsize range of 20mm to 75mm.

OAD: 32" L x 34" W x 82" H

Get a Free Quote Call: 630-629-9900

PDC Intl. Corp. Capper Neck Bander 75M

PART OF COMPLETE LINE

PDC Model 75M, automatic, continuous motion, neck bander / sleever rated from 50 to 300 container per minute – depending on materials, application and machine configuration. Size range of: 3/8" to 3" in diameter; 3/4" to 2" in height. Equipped with 18" diameter eel, with perf knife cut-off, start / stop, jog and feeder controls with e-stop, has a 18" L x 3" W hot air heat tunnel, and is mounted on S/S base frame.

OAD: 70" L x 48" W x 79" H

Get a Free Quote Call: 630-629-9900

PDC Intl. Corp. Capper Neck Bander 6743

PDC Model 90-2E, automatic, high speed, dual head / dual reel neck bander / sleeve applicator combined thru rates from 50 to 400 containers per minute – depending on materials, application and machine configeration. Size range: 3/8" to 3" in diameter; 5/8" to 5" in height (with proper chage parts). 120mm maximum lay flat band width, minimum flat band width per application. Equipped with dual heads for continuous operation (one running while other loading) dual timing screws, dual powered film unwind, low film sensors, band pre-shrink, no container / no band sensor, static eliminator, Siko gauges, stepper band feed drives. Control panel with Allen Bradley PLC and Panel view operator interface. Additional features include dual speed capability (senses product infeed volume and adjusts machine speed accordingly) and Lexan guarding. Mounted on (4) leveling leg base frame.
last running 350 cpm flat band width of 120mm
set to run 67mm lay flat width x 35mm high neck bands onto 4-1/2" high container.

OAD: 74" L x 70" W x 78" H

Get a Free Quote Call: 630-629-9900

Axon Capper Neck Bander EZ200

  • Manufacturer: Axon
  • Model Number: EZ200
  • Frain Number: 5F6633

Axon, Stainless steel, dual head neck banding and shrink tunnel system rated from 100 to 220 containers per minute – depending on materials and application. Film Lay flat range: 50mm to 200mm. Container diameter: 33mm to 124mm. Film Thickness: 40 to 70 microns. Tunnel Aperture: 7.5" in Width; 6.5" in Height; 24" in Length. Equipped with two 12" long timing screws, 168" long fixed bucket conveyor, dual Axon EZ-200 neck banders, Lexan safety guarding, and two 24" long Axon EZ-48-BR shrink tunnels. Mounted on a stainless steel frame with height adjustable legs and casters.

OAD: 184" L x 60" W x 84" H

Get a Free Quote Call: 630-629-9900

Kalish Capper Neck Bander 5480

  • Manufacturer: Kalish
  • Model Number: 5480
  • Frain Number: 5C9706

PART OF COMPLETE LINE

Fully automatic, stainless steel, inline, neck and body bander capable of speed from 10 to 60 bands per minute for layflats 30mm to 200mm in width. Features a cut length up to 200mm (7 3/4"), container height up to 11", knife cut, one or two vertical perforations, unwind sensor, scanner sensor, band pusher, band thickness 40 to 80 microns (1.0 to 3.0 mil), and material roll with a 5" diameter core and up to 17 1/5" diameter. Integrated with a heat shrink tunnel with a 21"L heat chamber, a 4"W by 16"H aperature, and six hot air blowers with individual height adjustements. Equipped with touch screen controls, toolless quick changeover, E-stop, and barrier guarding with electrical interlocks.

OAD: 66"L x 47"W x 70"W

Get a Free Quote Call: 630-629-9900

Axon Capper Neck Bander EZ100

  • Manufacturer: Axon
  • Model Number: EZ100
  • Frain Number: 5F5543

Axon, Model EZ-100, automatic, tamper evident shrink neck bander or sleeve label applicator. Rated from 40 to 150 containers per minute – speeds depending on materials, application and machine configuration. Layflat: 15 mm to 112mm. Container Size Range: 3/8" to 2-11/16". Film thickness: 40 to 70 microns. Equipped with photo eyes for machine activation, knife film cut off, stepper drive film feed system, registration, tamping and a touch pad controller with LED display. Mounted on a height adjustable stainless steel frame with leveling legs and casters. Film specifications: up to 15" diameter roll on a 3" core.

OAD: 48" L x 36" W x 86" H

Get a Free Quote Call: 630-629-9900

PDC Intl. Corp. Capper Neck Bander 55M

PDC Model 55M, stainless steel, neck bander / sleever rated from 50 to 120 container per minute – depending on materials and application. Band / sleeve size range: 3/8" to 3" in diameter, 5/8 to 2" in height with 4.8" maximum lay flat and minimum depending on application. Equipped with mechanical feed, vertical perf wheel, static eliminator and low material sensor with status light beacon. Designed for tamper evident banding and shrink sleeve labeling applications. Mounted on "H" style base frame leveling legs.

OAD = 32"L x 40"W x 92"H

Get a Free Quote Call: 630-629-9900