Over Lidder Machines

Used Over Lidder Equipment

Capper / over-lidders, or over-lid cappers are designed to apply a cap or lid onto a container on top of another cap or some other type of seal. Overlids are often resealable snap-on caps that are simply snapped onto the container. Over-lid cappers are designed to take in a container that already has a cap or some type of film closure. The over-lid capper feeds an over-lid from a magazine and places the over-lid on top of the container. The container and cap then usually pass under a set of pressure rollers to snap the over-lid in place. Some can over-lid cappers are designed to place over-lids on cans as the cans are on their sides. The cans are driven through the over-lid capper by drive belts that cause the can to turn. Pressure rollers are also used to snap the over-lid in place. Besides over-lids on cans, over-lids can also be found on top of aerosol containers and on top of plastic containers or cups that have been sealed with a foil or film seal. (Consumer products such as cream cheese, cottage cheese, or cans of chips use a package with a foil seal and an over-lid snap on cap.) Dosing cups on the caps of medicine bottles are also referred to as over-lids.

Contact Us

Over Lidder Equipment In Stock

Del Packaging Capper Over Lidder LCC

Del Packaging. Model LCC, automatic, stainless steel, inline, large container overlidder rated from 20 to 80 lids per minute – depending on materials and application. Capable of handling large pails or tubs, plastic or metal from 5" to 12" in Diameter of ridid injection molded lids or caps with proper change parts. Equipped with 104" long x 7" wide plastic container conveyor with, 48" long gravity fed lid magazine, vacuum pick off and powered roller compression section. Control panel with A/B controller start / stop and e-stop, jog, reset, no container / no lid and variable speed lid controls, mounted on height adjustable base frame.

OAD: 120" L x 45" W x 79" H

Get a Free Quote Call: 630-629-9900

Automation Devices Inc Capper Over Lidder 15

VFC Automation Devices, dual, vibratory bowl feed system with number of product per minute – depending on materials and application. Equipped with 19" long x 19" wide x 26" deep product feed hopper with plastic lift off cover and side site port, mounted on pedastal style stand with 13" long x 12" wide discharge chute and 58" discharge height, feeding dual 24" OD vibratory bowl feeders with vibratory control dials and 24" long x 1′ wide product discharge chute to 20" long worm screw feed. Mounted on common (4) leg base frame.

OAD: 60" L x 48" W x 87" H

Get a Free Quote Call: 630-629-9900

Thiele Capper Over Lidder 32-000

  • Manufacturer: Thiele
  • Model Number: 32-000
  • Frain Number: 5G4290

Thiele, Model 32-000, high speed free standing over lidder for tapered containers. Rated from 20-60 placements per minute – depending on materials, application. Equipped with 2 head rotary pick and place, 36" long magazine, screw infeed, 3"w lugged conveyor on 6" centers powered by 1Hp motor drive and has ½ Hp vacuum pump. Controls for jog / run, power on/off, vacuum on / off and E-stop.

OAD: 97" L x 47" W x 76" H

Get a Free Quote Call: 630-629-9900

Capper Over Lidder LIDFEED

  • Model Number: LIDFEED
  • Frain Number: 5G4061

Cap feeder/magazine for overlid style container.

Get a Free Quote Call: 630-629-9900

Aidlin Capper Over Lidder RDC-LB

  • Manufacturer: Aidlin
  • Model Number: RDC-LB
  • Frain Number: 5E9779

Automatic press on capper rated from 30 to 80 cpm – speeds depending on materials and application. Equipped with a 96" long x 3-1/2" wide conveyor, bulk cap sorter, cap chute, cap transfer station, side belt container transport system and variable speed drive.

OAD: 96"L x 36"W x 84"H

Get a Free Quote Call: 630-629-9900

Holmatic /Oystar Capper Over Lidder PH41RL

Automatic, S/S, inline overlidder capable of speed from to 40 to 120 cpm, depending on application. 158" L x 4 1/2" W plastic delrin chain feed conveyor with adjustable guide rails, starwheel infeed, and a 40" L rotary lugged chain container handling conveyor with (2) 5" L x 3 1/4" W oval container grippers pockets, lids are stripped out of the 36" H lid magazine by the container then snapped on thru a compression section, grippers pockets then open up and release down conveyor belt, has controller with start / stop buttons and a e-stop.

OAD: 160" L x 36" W x 75" H

Get a Free Quote Call: 630-629-9900

Holmatic /Oystar Capper Over Lidder PH-41P

Holmatic Model PH-41P, automatic, stainless steel, inline overlidder rated from 60 to 200 lids per minute – depending on materials and application. Equipped with 175" long x 4-1/2" wide plastic Delrin conveyor with adjustable guide rails, star wheel in feed, with 36" long rotary lugged chain container handling conveyor with round container grippers pockets, 48" long powered spinning roller lid magazine and powered roller compression section, grippers then open up and release down conveyor belt with no lid air ram reject. Control panelnd panel view controller with start / stop buttons and e-stop, no container no lid, variable speed controls, interlocking Lexan guarding, statis light and mounted on height adjustable base frame.

OAD: 178" L x 40" W x 80" H

Get a Free Quote Call: 630-629-9900

Holmatic /Oystar Capper Over Lidder PH-41P

Holmatic Model PH-41P, automatic, stainless steel, inline overlidder rated from 60 to 200 lids per minute – depending on materials and application. Equipped with 175" long x 4-1/2" wide plastic Delrin conveyor with adjustable guide rails, star wheel in feed, with 36" long rotary lugged chain container handling conveyor with round container grippers pockets, 48" long powered spinning roller lid magazine and powered roller compression section, grippers then open up and release down conveyor belt with no lid air ram reject. Control panel has panel view controller with start / stop buttons and e-stop, no container no lid, variable speed controls, interlocking Lexan guarding, statis light and mounted on height adjustable base frame.

OAD: 175" L x 46" W x 96" H

Get a Free Quote Call: 630-629-9900

MRM Elgin Capper Over Lidder S CAN LIDDER

  • Manufacturer: MRM Elgin
  • Model Number: S CAN LIDDER
  • Frain Number: 5E7620

Model "S" metal lid placer / closer. Designed to automatically separate filled metal cans and securely place and close both double / triple friction 603 lids on metal style paint cans. Equipped with 84" L x 7" W S/S delron conveyor, lid magazine, lid chute, dual 8" diameter compression wheels and is mounted on base frame with casters. Speeds dependent on materials, application and machine configuration.

OAD: 92" L x 28" W x 78" H

Get a Free Quote Call: 630-629-9900

Donahower Capper Over Lidder SHRL1000

  • Manufacturer: Donahower
  • Model Number: SHRL1000
  • Frain Number: 5C8966

3 lb can overcapper, Plastic lid applicator for 502 diameter cans with a maximum height of 700. Unit has a horizontal roller type lid magazine measuring 62” L x 26" W. Machine is mounted on adjustable steel legs.

OAD: 90" (L) x 80" (W) x 46" (H)

Get a Free Quote Call: 630-629-9900

Anderson Capper Over Lidder OC600A

  • Manufacturer: Anderson
  • Model Number: OC600A
  • Frain Number: 5C7228

Fully automatic 8 head overcapper capable of speeds from 80 to 200 Containers per minute – speeds depending on materials and application. Has a cleated belt cap elevator feed into a 36" diameter horizontal bowl feeder for sorting of caps. Cap spindles are on 7" centers and was last running an oval 48mm and 63mm flip top cap on a lotion container, currently set on 48mm. Has worm screw in feed into star wheel center guide. Containers are brought in to machine via worm screw and travel through machine on 3-1/4"w x 6’L conveyor. Caps are placed on container at first station, pressed down and container remains on conveyor throughout the process.
OAD: 144"L x 45"W x 112"H.

Get a Free Quote Call: 630-629-9900