Semi Auto (Semi-Automatic) Machines

Used Semi Auto (Semi-Automatic) Equipment

Semi-automatic cappers are designed to tighten the cap on a container or bottle but require an operator to place the cap on the bottle. Semi-automatic cappers are designed needing different levels of operator involvement. The most simple semi-automatic cappers, often called hand held cappers or manual assist cappers, require the operator to place the cap on the container, hold the container, bring the hand held capper in touch with the cap, and activate the hand held capper. (Hand held cappers are approximately the size of a powered screw driver.) At the other extreme of semi-automatic cappers are spindle cappers, often called retorquers. Semi-automatic spindle cappers require the operator to only place the cap on the container while the spindle capper automatically handles the remainder of the capping operation. Single head chuck cappers can also be used as semi-automatic cappers.

Spindle cappers use one of multiple pairs of counter rotating spindles. The gripper wheels at the end of the spindles make contact with the cap and tighten the cap on the container. The gap between the spindles gets progressively smaller with each subsequent pair of spindles to increase the force applied on the cap. Spindle cappers have gripper belts which grip both sides of the container to move the past the spindles and to prevent the container from spinning or turning as the caps are being tightened. Spindle cappers are designed to cap containers that are on a conveyor. (For more information on spindle cappers see Cappers / Spindle Cappers.)

Semi-automatic chuck cappers are designed with a single chuck. Semi-automatic chuck cappers require an operator to place the cap on the container and to place the container below the chuck. The chuck on the semi-automatic capper is then lowered by the operator to make contact with the cap and tighten the cap on the container. Once the proper amount of torque is applied to the cap, the chuck on the semi-automatic capper releases the cap. Chucks are designed to “sense” the amount of torque that is applied to the cap. The sensing of torque is often done pneumatically or mechanically, and the chucks can be adjusted to apply different amounts of torque. Chucks are specifically designed for the size cap that they are applying. For different size caps, different size chucks need to be installed on the semi-automatic capper.

Contact Us

Semi Auto (Semi-Automatic) Equipment In Stock

Accutek Capper Semi Auto (Capper) 22-001-000

  • Manufacturer: Accutek
  • Model Number: 22-001-000
  • Frain Number: R22842

Semi-automatic, stainless steel, 6-spindle, capper capable of 5 to 100 caps per minute for screw and lug type caps. Caps: (10mm – 150mm) diameter. Bottles: up to 10"W. Has 5 to 65 lbs max torque depending on materials and application. 36"L x 1"H side bottle grip belts open to a maximum 9" width adjustment, controls for individual pairs of spindles, height adjustable C-style frame, and E-stop. Designed to be mounted above conveyor. Mounted on stainless steel frame with set down feet and casters.

OAD: 38"L x 35"W x 61"H

Get a Free Quote Call: 630-629-9900

Kiss Pkg Capper Semi Auto (Capper) VACT06DG

  • Manufacturer: Kiss Pkg
  • Model Number: VACT06DG
  • Frain Number: R22206

Three station semi-automatic capper (torquer) rated from 60 to 150 cpm – speeds depending on materials and application. Three sets of spindle style tightener wheels. Cap size range: 10mm to110mm. Air torque adjustment on third spindle set, individual speed adjustment on spindle and container belt speed, height adjustment on capping head, independent gripper belt height adjustment, stainless steel base with wheels and leveling legs.

OAD: 68" (L) x 50" (W) x 72" (H)

Get a Free Quote Call: 630-629-9900

Kiss Pkg Capper Semi Auto (Capper) 2STATIONTIGHTNE

  • Manufacturer: Kiss Pkg
  • Model Number: 2STATIONTIGHTNE
  • Frain Number: R19635

Two station cap tightner semi-automatic capper (torquer) with:Two sets of spindle style tightener wheels, individual speed adjustment on spindle and container belt speed, height adjustment on capping head, independent gripper belt height adjustment s/s base with wheels and leveling legs.

OAD: 52" (L) x 42" (W) x 76" (H)

Get a Free Quote Call: 630-629-9900

Kiss Pkg Capper Semi Auto (Capper) CT08 Capper 8 quill or 4 Station Heavy Duty Cap Tightener

  • Manufacturer: Kiss Pkg
  • Model Number: CT08
  • Frain Number: R18771

Eight Spindle / four station, heavy duty cap tightener. Capable of handling cap diameters from 10mm to 120mm. Equipped with double gripper belts, individual adjustment on spindles and gripper belts, air clutch on last set of spindles for finale torque adjustment. Motorized height adjustment.
Frame 42" long, (belts 38" long)

Get a Free Quote Call: 630-629-9900

Pack West Capper Semi Auto (Capper) 120 TORQUER

  • Manufacturer: Pack West
  • Model Number: 120 TORQUER
  • Frain Number: 5F8180

Inline, 3 station, 6 spindle, stainless steel capper rated from 80 to 200 cpm – speeds depending on materials and application. Cap size range: 10mm – 120mm. Equipped with 24" long x 1" wide single container gripper belts, hand crank height adjustment, gripper belt and quill speed contols with air clutch and 3-1/4" wide x 96" long Delrin tabletop conveyor with 32" infeed/discharge height and 1/8hp motor. Mounted on roll over conveyor base frame.

OAD: 60" L x 42" W x 85" H

Get a Free Quote Call: 630-629-9900