Bliss Machines

Used Bliss Equipment

Bliss case erectors or bliss box case erectors are designed to erect bliss boxes or bliss cases. Bliss boxes are made from a solid bottom piece that is folded to form two sides, and two additional pieces, which are inserted into the box and attached to the solid bottom piece to form the other two sides. The addition two pieces to form the additional sides of the bliss box are glued into the inside of the solid bottom piece using hot melt glue. Because of the solid bottom piece, bliss box erectors create a case that only has top flats to close and seal once the case has been filled.

Bliss Equipment In Stock

W E Plemons Machinery Service Case Erector Bliss BLISS

W E Plemens, Model Bliss. automatic, bliss box former, hot melt glue sealer rated from 10 to 35 cases per minute – depending on material and application. Case size range: 9-1/4" to 31-7/8" in Length; 8" to 20" in Width; 4" to16"in Height. Equipped with blank case magazine, 6-cup vacuum pick n place, center guide roller, (2) side blank feed magazine, forming mandrel (2) glue hot pots with temperature controllers vacuum system, start and e-stops controls.

OAD: 71"L x 60"W x 94"H

Get a Free Quote Call: 630-629-9900

Wexxar Case Erector Bliss ABH

  • Manufacturer: Wexxar
  • Model Number: ABH
  • Frain Number: 5E7540

Automatic, H/M glue, tray former "bliss" style capable of speeds up to 35 tpm, depending on tray type. Tray size range of: 11" – 24" L x 8" – 20.5 " W x 4" – 12" H, has a top 54" L x 19" W, and (2) side 48" L x 11" W blank tray magazines, with vacuum pick – n -place, center guide rollers, forming mandrel, and a 21" tray discharge height. Mechanical drive with start / stop, glue, mag, jog, cycle, on /off control switches, e-stop, and a Nordson glue system. A/B SLC

OAD: 103" L x 60" W x 100" H

Get a Free Quote Call: 630-629-9900

Wexxar Case Erector Bliss ABH

  • Manufacturer: Wexxar
  • Model Number: ABH
  • Frain Number: 5E6792

Wexxar Model ABH, automatic, hot melt glue, tray former "bliss" style capable of speeds from 10 to 35 trays per minute – speeds depending on material and application. Tray size range: 11" – 24" L x 8" – 20.5" W x 4" – 12" H, has a top 54" L x 19" W, and (2) side 48" L x 11" W blank tray section magazines, with vacuum pick – n -place, center guide rollers, forming mandrel, has 21" tray discharge height, with a Nordson 3700 (2) gun H/M glue system, mechanical drive with start / stop, glue, mag, jog, cycle, on /off control switches, and e-stop.

OAD: 103" L x 60" W x 100" H

Get a Free Quote Call: 630-629-9900

Wexxar Case Erector Bliss ABH

  • Manufacturer: Wexxar
  • Model Number: ABH
  • Frain Number: 5E6790

Wexxar Model ABH, automatic, hot melt glue, tray former "bliss" style capable of speeds from 10 to 35 trays per minute – speeds depending on material and application. Tray size range: 11" – 24" L x 8" – 20.5" W x 4" – 12" H, has a top 54" L x 19" W, and (2) side 48" L x 11" W blank tray magazines, with vacuum pick n place, center guide rollers, forming mandrel, and 21" tray discharge height, with a Nordson 3700 (2) gun H/M glue system.
mechanical drive with start / stop, glue, mag, jog, cycle, on /off control switches, and e-stop.

OAD: 103" L x 60" W x 100" H

Get a Free Quote Call: 630-629-9900