Tape Machines

Used Tape Equipment

Tape case erectors are designed to erect cases from pre-scored flat corrugated blanks and close and seal the bottom of the case with a strip of tape. Tape case erectors can either erect the cases with the case opening facing up vertically or with the case opening facing out horizontally. Tape case erectors are designed to use either two inch wide or three inch wide tape depending on the type of taping head that is mounted on the tape case erector.

Tape Equipment In Stock

Wexxar Case Erector Tape WFT

  • Manufacturer: Wexxar
  • Model Number: WFT
  • Frain Number: 5G6381

Wexxar Model WFT, automatic, right to left hand, case erector, bottom taper rated from 5 to 20 cases per minute – depending on materials and application Case size range: 6" to 24" in Length; 5" to 17" in Width; 3.5" to 16.5" in Depth. Equipped with 60" long powered dual screw blank case magazine, pin and dome case erecting system, minor and major flap closers, case pusher bar, 2" bottom tape head with 34" long x 3" wide side dual case assit belt conveyor, Control panel has A/B controller, with start, stop, e-stop controls and safety door guarding Mounted on (4) leg base frame.

OAD: 148" L x 56" W x 87" H

Get a Free Quote Call: 630-629-9900

OK International Case Erector Tape SUPERFORMER 1M

OK International, Model Superformer 1M, automatic case erector, bottom taper. Rated from 3 to 16 cases per minute – depending on materials and application. Case size range: 8" to 18" in Length; 6" to 14" in Width; 3" to 16" in Height. Equipped with automatic dual belt, blank case magazine, recipricating vacuum pic-n-place and squaring system, front and back flap closers, 2" bottom tape head with 14" maximum roll diameter, easy size change over and hand crank adjustable. Control panel has PLC controller with start, stop and e-stop push button controls, interlock safety guarding and status light bar. Mounted on height adjustable base frame.

OAD: 116"L x 53"W x 76"H

Get a Free Quote Call: 630-629-9900

Wepackit Machinery Case Erector Tape 720XL

Wepackit, Model 720XL, automatic case erector, bottom taper. Rated from 1 to 14 cases per minute – depending on materials and application. Case size range: 6" to 17" in Length, 6 to 13" in Width; 3" to 13" in Depth (maximum diagonal of the case is 28" and maximum knockdown size is 34" x 27"). Equipped with top mounted blank case magazine with single head (2) vacuum suction cups pic n place which erects blank cases and flips to minor flap side, 46" long x 3" wide side case assit belts, major flap closers, 2" bottom tape head and flip-up safety guarding. Control panel has A/B PLC controller with start / e-stop push buttton controls. Mounted on base frame with casters.

OAD: 78"L x 53"W x 97"H

Get a Free Quote Call: 630-629-9900

Pearson Case Erector Tape CE35

  • Manufacturer: Pearson
  • Model Number: CE35
  • Frain Number: 5G7600

Pearson, Model CE35, automatic, case erector and bottom tape sealer. Rated from 5 to 30 cases per minute – depending on materials and application. Case size range: 10" to 30" in Length; 9" to 24" in Width, 10" to 26" in Depth. Equipped with 81" long x 24" wide (4) chain automatic blank case magazine, suction cup pic n place and case erecting squaring system with top hold down and 75" long choke feed. hand crank height and width adjustable case feed section, top flap lifters and rear flap closer plows with 3" wide bottom tape head. A/B PanelView 300 micro touch screen controller with push button start / stop / E-stop push button controls. Mounted on heavy duty base frame with interlock safety guarding.

OAD: 228"L x 82"W x 117"H

Get a Free Quote Call: 630-629-9900

Marq Case Erector Tape HPE215

  • Manufacturer: Marq
  • Model Number: HPE215
  • Frain Number: 5G4890

Marq Model HPE21510-RH/DL, automatic, case erector, bottom taper rated from 5 to 15 cases per minute – depending on materials, application and machine configuration. Case size range: 8" to 27" in Length; 5.25" to 17" in Width; 3.5" to 18" in Height. Equipped with continuous feed magazine, top vacuum suction cup pick off, and case erector, lugged chain case conveyor, minor and major flap closers, top arch squaring device and Dekka pressure sensitive 2" tape head. PLC controller has touch pad controls, with jog, hold, machine run and arch top hold down up and down, switches with start, e-stop push button controls and statis light bar. Mounted on height adjustable base frame.

OAD: 96" L x 82" W x 86" H

Get a Free Quote Call: 630-629-9900

Durable Case Erector Tape TGA2000CR

  • Manufacturer: Durable
  • Model Number: TGA2000CR
  • Frain Number: 5G1656

Durable Model TGA200OCR, automatic case erector, bottom sealer rated from 4 to 20 cases per minute – depending on materials and application. Case size range: 7" to 20" in Length; 6" to 22" in Width; 4" to 16" in Height. Equipped with 48" long powered case magazine, pneumatic tri-grip, 3 suction cup case pick-in-place, dual 66" long x 2-1/2" wide side belt case assist conveyor belts with 33" discharge height and 2" wide bottom tape head.

OAD:120" L x 85" W x 89" H

Get a Free Quote Call: 630-629-9900

ABC Case Erector Tape 130T

  • Manufacturer: ABC
  • Model Number: 130T
  • Frain Number: 5F6772

ABC Model 130T, automatic, case erector, bottom tape sealer. Case size range: 7" to 22-3/4" in Length; 5-3/4 – 16" in Width; 3 to 22" in Height. Knockdown size range: 12" to 38" in Length; 8" to 29-1/4" in Width for both RSC and HSC cases. Equipped with 72" long large capacity, easy load automatic blank case magazine, suction cup gripper case erector, major and minor flap closers, walking beam case transfer, 48" long x 2-1/2 wide dual upper and lower case belt drive transports through tape head. Control panel with A/B PLC and Electro Cam 5000 touch pad controller with readout, e-stop buttons and interlock safety guarding. Speeds dependant on materials, application and machine configuration.

OAD: 192" L x 60" W x 80" H

Get a Free Quote Call: 630-629-9900

Combi America Case Erector Tape 2EZ

Combi America Model 2-EZ, automatic, left hand, case erector, bottom taper rated from 3 to 12 cases per minute – depending on materials and application Case size range: 6" to 20" in Length x 4-1/2" to 16" in Width x 4-1/2" -18" in Height. Equipped with easy load, blank case magazine, suction cup pic-n-place, minor and major flap closers, mechanical pusher bar, vacuum system, quick-release slide out, 3M Accuglide II, 2" tape head, hand crank no-tool adjustments, safety guarding, start, stop and e-stop push buttons, with auto case switch. Mounted on height adjustable steel-it painted finished frame with casters.

OAD: 96" L x 86" W mag open x 72" H
55" W mag closed

Get a Free Quote Call: 630-629-9900

Little David Case Erector Tape CF30T

  • Manufacturer: Little David
  • Model Number: CF30T
  • Frain Number: 5F5300

Little David Model CF30T, automatic, case erector and bottom taper rated from 3 to 10 cases per minute – speeds depending on materials and application. Case size range: 8" to 18" in Length; 8" to 15" in Width; 6" to 15" in Height. Equipped with a 72" long blank case magazine, vacuum pick and place, flap plows and closers, 2" bottom tape head, A/B PLC, and Lexan safety guarding.

OAD: 158" L x 55" W x 72" H

Get a Free Quote Call: 630-629-9900

Wexxar Case Erector Tape WFT

  • Manufacturer: Wexxar
  • Model Number: WFT
  • Frain Number: 5G7631

Wexxar, Model WFT, automatic, pin and dome, case erector, bottom taper. Rated from 5 to 15 cases per minute – depending on materials and application. Case size range:6" to 24" in Length; 6" to 17" in Width; 9" to 24" in Depth (flaps up). 6" to 24" in Length; 5" to 17" in Width; 3.5" to 16.5" in Depth (flaps down). Equipped with 72" long, powered dual screws blank case magazine pin and dome case erecting system, 32" long x 3" wide dual case assit conveyor belts, 2" bottom tape head, Control panel with A/B controller, interlocking safety guarding. Mounted on (4) leg base frame with height adjustable legs and casters.

OAD: 175"L x 50"W x 75"H

Get a Free Quote Call: 630-629-9900

Durable Case Erector Tape DGA2000

  • Manufacturer: Durable
  • Model Number: DGA2000
  • Frain Number: 5G9756

Durable, Model DGA-2000, automatic case erector, bottom sealer rated from 5 to 12 cases per minute – depending on materials, application and machine configuration. Case size range: 7" to 20" in Length; 6" to 16" in Width; 4" to 16" in Height. Equipped with 48" long case magazine, pneumatic tri-grip, 3 suction cup case pick-in-place, dual 58" long x 2½" wide side belt case assist conveyor belts with 29" discharge height and 2" wide bottom tape head. Mounted on (4) leg base frame with casters.

OAD: 108"L x 80"W x 70"H

Get a Free Quote Call: 630-629-9900

Lantech Case Erector Tape C300

  • Manufacturer: Lantech
  • Model Number: C300
  • Frain Number: 5H0071

Lantech, Model C300, automatic case erector, bottom sealer. Rated from 1 to 10 cases per minute – depending on materials, application and machine configuration. Case size range: 7-7/8" to 19-5/8" in Length; 5-7/8" to 13-¾" in Width; 5-7/8" to 20-¾" in Height. Equipped with 53" long case magazine, (6) suction cup case pick-in-place, dual 34" long x 4" wide side belt case assist conveyor belts with a 25" discharge height and 2" wide bottom tape head. Mounted on base frame with height adjustable legs.

OAD: 85" L x 88" W x 61" H

Get a Free Quote Call: 630-629-9900