Tape Machines

Used Tape Equipment

Tape case erectors are designed to erect cases from pre-scored flat corrugated blanks and close and seal the bottom of the case with a strip of tape. Tape case erectors can either erect the cases with the case opening facing up vertically or with the case opening facing out horizontally. Tape case erectors are designed to use either two inch wide or three inch wide tape depending on the type of taping head that is mounted on the tape case erector.

Tape Equipment In Stock

Lantech Case Erector Tape C300

  • Manufacturer: Lantech
  • Model Number: C300
  • Frain Number: 5H0071

Lantech, Model C300, automatic case erector, bottom sealer. Rated from 1 to 10 cases per minute – depending on materials, application and machine configuration. Case size range: 7-7/8" to 19-5/8" in Length; 5-7/8" to 13-¾" in Width; 5-7/8" to 20-¾" in Height. Equipped with 53" long case magazine, (6) suction cup case pick-in-place, dual 34" long x 4" wide side belt case assist conveyor belts with a 25" discharge height and 2" wide bottom tape head. Mounted on base frame with height adjustable legs.

OAD: 85" L x 88" W x 61" H

Get a Free Quote Call: 630-629-9900

Wexxar Case Erector Tape WFT

  • Manufacturer: Wexxar
  • Model Number: WFT
  • Frain Number: 5G9310

Wexxar, Model WFT, automatic, pin and dome, case erector, bottom taper. Rated from 5 to 15 cases per minute – depending on materials, application and machine configuration. Case size range: 7" to 24" in Length; 5" to 17" in Width; 5" to 12" in Height. Equipped with 48" long, powered dual screws blank case magazine, pin and dome case erecting system, 32" long x 3" wide dual case assit conveyor belts, 2" bottom tape head and hand crank adjustable. Control panel has A/B controller, with start, stop and e-stop push button controls and interlocking safety guarding. Mounted on (4) leg base frame with height adjustable legs.

OAD: 122" L x 65" W x 78" H

Get a Free Quote Call: 630-629-9900

Marq Case Erector Tape HPE2000-RH-C

  • Manufacturer: Marq
  • Model Number: HPE2000-RH-C
  • Frain Number: 5G7881

Marq, Model HPE-2000-RH-C-R, automatic, case erector, bottom taper. Rated from 2 to 10 cases per minute – depending on materials and application. Case sizes range: 10" to 20" in Length; 8" to 19" in Width; 6" to 15" in Height. Equipped with blank case magazine, vacuum suction cup pick n place, lugged chain case conveyor, top squaring device, minor and major flap closers, hand crank height and width adjustable, with 3m 2" pressure sensitive bottom taper. Control panel Compudrive controller has touch pad controls with read out, start / stop and e-stop push buttons, pnuematic package and mounted on base frame.

OAD: 120"L x 60"W x 60"H

Get a Free Quote Call: 630-629-9900

Wexxar Case Erector Tape WF2T

  • Manufacturer: Wexxar
  • Model Number: WF2T
  • Frain Number: 5G8539

Wexxar, Model WF-2T, automatic, inline case erector and bottom tape sealer. Case size range: 7" to 24" in Length; 5" to 17" in Width; 5" to 12" in Height. Equipped with 72" long powered blank case magazine, reciprocating pin and dome case forming plates, minor and major flap closers, 2" Dekka tape head and dual side belt discharge. Control panel has A/B PLC with push button controls for jog, start, stop and e-stop. Includes status light bar and safety guarding. Mounted on leveling legs. Speed dependant on materials, application and machine configuration.

OAD: 140" L x 60" W x 86" H

Get a Free Quote Call: 630-629-9900

Durable Case Erector Tape TGA300IL

  • Manufacturer: Durable
  • Model Number: TGA300IL
  • Frain Number: 5G8111

Durable, Model TGA300IL, automatic case erector, bottom sealer. Rated from 4 to 20 cases per minute – depending on materials, application and machine configuration. Case size range: 7" to 20" in Length; 6" to 16" in Width; 4" to 16" in Height. Equipped with 70" long case magazine, pneumatic tri-grip (4) suction cup case pick-in-place, dual 64" long x 2½" wide side belt case assist conveyor belts with a 21" discharge height and 2" wide bottom tape head.

OAD: 114" L x ___" W x 66" H

Get a Free Quote Call: 630-629-9900

OK International Case Erector Tape SUPERFORMER 1M

OK International, Model Superformer 1M, automatic case erector, bottom taper. Rated from 3 to 16 cases per minute – depending on materials and application. Case size range: 8" to 18" in Length; 6" to 14" in Width; 3" to 16" in Height. Equipped with a 42"Long dual belt blank case magazine, reciprocating vacuum pic-n-place and squaring system, front and back flap closers, 46" long side gripper belt transfer conveyors, 3" bottom tape head with 14" maximum roll diameter, hand crank easy size change system, interlock safety guarding, and status light bar. Mounted on a leveling legs.

OAD: 113"L x 53"W x 76"H

Get a Free Quote Call: 630-629-9900

Little David Case Erector Tape CF20

  • Manufacturer: Little David
  • Model Number: CF20
  • Frain Number: 5G7000

Little David Model CF20, automatic case erector and bottom taper. Rated from 1 to 6 cases per minute – speeds depending on materials and application. Case size range: 6 to 16" in Length; 6 to 12" in Width; 4 to 12" in Height. Equipped with 53" long blank case magazine, vacuum pick and place, flap plows and closers, hand crank height and width adjustable with 2" bottom tape head. Control panel has push button start / stop / step controls and Lexan safety guarding. Mounted on heavy duty (4) leg base frame with casters.

OAD: 116"L x 45"W x 85"H

Get a Free Quote Call: 630-629-9900

Marq Case Erector Tape HPE2000-RH-C

  • Manufacturer: Marq
  • Model Number: HPE2000-RH-C
  • Frain Number: 5G6960

Marq Model HPE2000-6-RH-C, automatic, right hand case erector, bottom taper rated from 2 to 10 cases per minute – depending on materials and application. Case sizes range: 10" to 20" in Length; 8" to 19" in Width; 6" to 15" in Height. Equipped with a 52" long blank case magazine, (3) vacuum suction cup pick n place, lugged chain case transport conveyor, with top squaring device, minor and major flap closers, hand crank height and width adjustable, with 3" pressure sensitive bottom taper. Control panel has Compudrive controller with touch pad controller and read out, with start / stop and e-stop push buttons controls. Mounted on heavy duty base frame with casters.

OAD: 165"L x 58"W x 55"H

Get a Free Quote Call: 630-629-9900

Blueprint Automation Case Erector Tape CASE ERECTOR

Blueprint Automation, automatic case erector and bottom taper. Rated from 5 to 15 cases per minute – depending on materials and application. Case size range: 10" to 22" in Length; 6" to 16" in Width; 9" to 22" in Height (with flap open). Equipped with 84" long blank case magazine, vacuum pick and place, flap plows and closers with 2" bottom tape head. Foot pedal operation with push button start / stop / reset controls with stripper height up / down control switch. Mounted on heavy duty base frame with leveling legs.

OAD: 115"L x 138"W x 68"H

Get a Free Quote Call: 630-629-9900

Little David Case Erector Tape CF40T

  • Manufacturer: Little David
  • Model Number: CF40T
  • Frain Number: 5G6820

Little David CF40T, automatic, case former, bottom taper rated from 5 to 20 cases per minute – depending on materials and application. Case size range: 7" to 24" in Length; 6" to 16" in Width; 4" to 16" in Height. Equipped with 58" x 42" blank case magazine, (4) suction cup reciprocating pick and place, bottom minor and major flap closers, 68" long lugged case transfer conveyor, 3" bottom tape head, Lexan safety guarding, and push button controls. Mounted on base frame with locking casters.

OAD: 131"L x 97"W x 65"H

Get a Free Quote Call: 630-629-9900

Durable Case Erector Tape TGA200IQCL

  • Manufacturer: Durable
  • Model Number: TGA200IQCL
  • Frain Number: 5G6750

Durable Model TGA2001QCL, automatic case erector, bottom taper rated from 5 to 12 cases per minute – depending on materials and application. Case size range: 7" to 20" in Length; 6" to 16" in Width; 4" to 16" in Depth. Equipped with 48" long blank case magazine, pneumatic tri-grip case erector and squaring arm, bottom flap closer, with side plows, dual 60" long x 3" wide case side belt asset conveyors. Control panel has start, stop and e-stop push button controls with manual, off, auto control with slide door safety guarding. Mounted on (4) leg height adjustable base frame.

OAD: 115" L x 96" W x 52" H With Magazine
115" L x 48" W x 52" H Without Magazine

Get a Free Quote Call: 630-629-9900

ABC Case Erector Tape 330T

  • Manufacturer: ABC
  • Model Number: 330T
  • Frain Number: R26920

ABC, Model 330T, automatic case erector and bottom tape sealer. Rated from 10 to 30 cases per minute – depending on materials and application. Case size range; 7" to 22¾" in Length; 5¾" to 16" in Width; 7" to 22" in Height, with KD dimmensions of: 12" to 38" in Length; 8" to 29¼" in Width both (RSC) and (HSC) cases. Equipped with a 64" long x 13" wide easy load automatic blank case magazine, suction cup pick and place with self-adjusting spring loaded suction cups, suction cup case erector, major and minor flap closers, walking beam case transfer, 45" long x 2½" wide dual upper and lower case belt drive transports thru 2" tape head and Siko gages. Control panel with Koyo controller, touch screen controls and e-stop buttons with interlock gull-wing safety guarding.

OAD: 200" L x 70" W x 76" H

Get a Free Quote Call: 630-629-9900