Tape Machines

Used Tape Equipment

Tape case erectors are designed to erect cases from pre-scored flat corrugated blanks and close and seal the bottom of the case with a strip of tape. Tape case erectors can either erect the cases with the case opening facing up vertically or with the case opening facing out horizontally. Tape case erectors are designed to use either two inch wide or three inch wide tape depending on the type of taping head that is mounted on the tape case erector.

Tape Equipment In Stock

Wexxar Case Erector Tape WF30

  • Manufacturer: Wexxar
  • Model Number: WF30
  • Frain Number: R26720

Wexxar, Expanded Range Model WF-30T, automatic, inline case erector and bottom tape sealer. Rated from 5 to 30 cases per minute – depending materials, application and machine configuration. Case size range: 6" to 24" in Length; 5" to 17" in Width; 5" to 16" in Height. Equipped with 94" long powered blank case magazine, pin and dome case forming plates, minor and major flap closers, case pusher bar, 2" Dekka flip up tape head and 32" long dual side belt discharge section. Control panel has A/B PLC with Panel View Plus 1000 touch screen controls and e-stop, status light bar and safety guarding. Mounted on base frame with leveling legs.

OAD: 168" L x 65" W x 99" H

Get a Free Quote Call: 630-629-9900

ABC Case Erector Tape 112T

  • Manufacturer: ABC
  • Model Number: 112T
  • Frain Number: 5G5091

ABC, Model 112, automatic case erector and bottom taper rated from 5 to 15 cases per minute – depending on materials and application. Case size range: 7" – 22-3/4" in Length; 5-3/4" – 16" in Width; 4" – 15" in Height. Equipped with blank case magazine with vacuum pull down, mechanical slide bar transfer, two opening arm with dual grippers, dual walking beam case transfer, flap closers with 48" long x 3" wide top and bottom case assit belts drive case through 2" wide tape head. Control panel with start, stop and e-stop controls.

OAD: 150" L x 60" W x 75" H

Get a Free Quote Call: 630-629-9900

Little David Case Erector Tape CF30T

  • Manufacturer: Little David
  • Model Number: CF30T
  • Frain Number: 5G4910

Little David Model CF30T, automatic, case erector and bottom taper rated from 3 to 10 cases per minute – speeds depending on materials and application. Case size range: 8" to 18" in Length; 8" to 15" in Width; 6" to 15" in Height. Equipped with 36" long blank case magazine, vacuum suction cup pick n place and erectors, chain case feed with pneumatic major and minor flap closers, with 3" bottom tape head and is hand crank height and width adjustable. Control panel has A/B controller with start, stop controls and Lexan safety sliding doors. Mounted on base frame with locking casters.

OAD: 116" L x 60" W x 72" H

Get a Free Quote Call: 630-629-9900

Wexxar Case Erector Tape ABFT

  • Manufacturer: Wexxar
  • Model Number: ABFT
  • Frain Number: R26290

Wexxar Model ABFT, automatic, case erector, bottom taper. Case size range: 8" to 22" in Length; 6" to 16" in Width; 4" to 19" in Height. Equipped with 48" long powered case magazine, pin and dome case erecting system with minor and major bottom flat closers, case pusher bar, 2" wide pressure sensitive bottom tape head, dual side belt assist conveyors. Control panel has A/B controller with run, jog, on / off switches and start, stop, e-stop, status light bar and safety guarding. Mounted locking casters. Speed dependant on materials, application and machine configuration.

OAD: 156" L x 45" W x 82" H

Get a Free Quote Call: 630-629-9900

Wexxar Case Erector Tape WFT

  • Manufacturer: Wexxar
  • Model Number: WFT
  • Frain Number: R25749

Wexxar Model WFT, automatic, right to left hand, compact case erector, bottom taper rated from 5 to 15 cases per minute – depending on materials and application. Case size range:10" to 22" in Length; 6" to 16" in Width; 9" to 24" in Depth (flaps up). 6" to 24" in Length; 6" to 17" in Width; 3.5" to 16.5" in Depth (flaps down). Equipped with 48" long powered dual screw blank case magazine, pin and dome case erecting system, major and minor flap closers minor and major flap closers, case pusher bar, with 36" long x side roller case assit and 2" bottom tape head. Control panel has A/B controller, pnuematic system, vari-speed controller and start, stop and e-stop push button controls with slid door safety guarding. Mounted on (4) leg base frame with casters.

OAD: 120" L x 48" W x 78" H

Get a Free Quote Call: 630-629-9900

Wepackit Machinery Case Erector Tape 320E

Wepackit Model 320E, automatic. uniform, case erector, bottom taper rated from 5 to 25 cases per minute – depending on materials, application and machine configuration. Case size range: 6" to 22" in Length; 5" to 14" in Width; 4.5" to 16" in Depth. Equipped with 34" long x 34" wide blank case magazine, pneumatic suction cup pick-in-place with side case erector, major and minor case flap closers, 96" long lugged top and bottom case transfer conveyor, hand crank height and width adjustable and 2" wide tape head. Control panel has touch pad controller with read out, start, e-stop push button controls, status light bar and interlock safety guarding. Mounted on casters.

OAD:132" L x 48" W x 71" H

Get a Free Quote Call: 630-629-9900

Wexxar Case Erector Tape WF20

  • Manufacturer: Wexxar
  • Model Number: WF20
  • Frain Number: 5G4620

Wexxar Model WF-20T, automatic, case erector, bottom taper rated from 5 to 20 cases per minute – depending on materials and application. Case size range: 6" to 24" in Length; 5" to 17" in Width; 3.5" to 16.5" in Height. Equipped with 72" long blank case magazine, pin and dome case erecting system, minor and major flap closers, 52" long 3" wide hand crank adjustable side case transfer conveyors, 2" bottom tape head, 36" long hand crank adjustable side gripper belts, A/B controller has push button controls with panel view, start / e-stop push buttons controls statis light bar and interlock safety guarding. Mounted on height adjustable legs.

OAD: 162" L x 64" W x 82" H

Get a Free Quote Call: 630-629-9900

Little David Case Erector Tape CF40T

  • Manufacturer: Little David
  • Model Number: CF40T
  • Frain Number: 5G4270

Little David CF40T, Automatic, case former, bottom taper rated from 5 to 20 cases per minute – depending on materials and application. Case size range: 7" to 24" in Length; 6" to 16" in Width; 4" to 16" in Height. Equipped with 54" x 40" blank case magazine, 4 suction cup reciprocating pick and place, bottom minor and major flap closers, 72" long lugged case transfer conveyor, 2" bottom tape head, Lexan safety guarding, and push button controls. Mounted on base frame with locking casters.

OAD: 133"L x 110"W x 61"H

Get a Free Quote Call: 630-629-9900

Durable Case Erector Tape TGA1000

  • Manufacturer: Durable
  • Model Number: TGA1000
  • Frain Number: 5G4053

Durable Model TGA1000, automatic, right to left case erector, bottom tape sealer rated from 5 to 15 cases per minute – depending on materials and application. Case size range: 7" to 20" in Length; 6" to 16" in Width; 5" to 16" in Depth. Equipped with 48" long blank case magazine, pneumatic tri-grip case erector and squaring arm, bottom flap closer, side flap plows and dual 60" long x 2-1/2" wide side belt case asset conveyors, with 2" bottom tape head. Control panel has A/B controller with auto, off, demand with set up and operator mode control switches, with slide door safety guarding and status light bar. Mounted on heavy duty base frame with casters.

OAD: 120" L x 96" W x 72" H With Magazine
120" L x 56" W x 72" H Without Magazine

Get a Free Quote Call: 630-629-9900

Lantech Case Erector Tape C-2000

  • Manufacturer: Lantech
  • Model Number: C-2000
  • Frain Number: R25880

Lantech, Model C-2000, automatic, inline case erector, bottom taper rated from 5 to 15 cases per minute – depending on materials and application. Case size range: 7-7/8" to 25 5/8" in Length; 5-7/8" to 17-3/4" in Width; 5-7/8" to 23 7/8" in Height. Equipped with 60" long powered dual belt blank case magazine, (4) suction cup pic n place and (4) suction cup case erector combo, 60" long top and bottom lugged case transport conveyors with 40" discharge height, minor and major flap closers, and 2" wide tape head. Control panel has A/B PLC, and swing arm controller with auto, manual, off vacuum controls, start and e-stop buttons, safety guarding, and quick change over capable. Mounted on base frame.

OAD: 100" L x 105" W x 70" H (with magazine)
100" L x 45" W x 70" H (without magazine)

Get a Free Quote Call: 630-629-9900

Durable Case Erector Tape DURAFORMER2

  • Manufacturer: Durable
  • Model Number: DURAFORMER2
  • Frain Number: R24050

Durable Model Duraformer, automatic right handed, case erector, bottom taper rated from 5 to 15 cpm – speeds depending on materials and application. Case size range: 7" – 20" in Length x 6" – 16" in Width x 4" – 16" in Height. Equipped with a 60" blank case magazine, Tri-Grip pneumatic erector arm, 60" long dual side belt case conveyors with 36" discharge height. Features hand crank adjustablity, 2" tape head with 14" diameter roll on 3" core and A/B touch pad controller with panel view.

OAD: 120" L x 68" W x 78" H

Get a Free Quote Call: 630-629-9900

Durable Case Erector Tape TGA200I

  • Manufacturer: Durable
  • Model Number: TGA200I
  • Frain Number: 5G1714

Durable Model TGA200, automatic case erector, bottom taper rated from 5 to 12 cases per minute – depending on materials and application. Case size range: 7" to 20" in Length; 6" to 16" in Width; 4" to 16" in Depth. Equipped with 39" long blank case magazine, pneumatic quad-grip suction cup case pick n place, 2" wide pressure sensitive tape head, and dual 60" x 2-1/2" side belt conveyors with slide door safety guarding.

OAD: 115" L x 85" W x 65" H With Magazine
115" L x 48" W x 65" H Without Magazine

Get a Free Quote Call: 630-629-9900