Fillers - Paste Filling Machines

Used Fillers - Paste Filling Equipment

Filler Paste Equipment – Paste fillers, or paste filling equipment, are designed to fill paste into glass, plastic, or other types of containers. Paste fillers use either pistons or other positive displacement mechanisms to feed the proper amount of paste into the container. The term paste filler can be misleading. Because of the operation of paste fillers, paste fillers can also be used to fill other products besides paste including salsas and other products with particulates. Paste fillers can be designed for semi-automatic or automatic operation. Semi-automatic paste fillers require operators to present containers below the paste filling nozzle and to trigger the operation of the paste filler. Automatic paste fillers automatically index containers below the paste filling nozzles and trigger paste filling operation without any required operator input. Automatic paste fillers are often integrated into fully automatic production and packaging lines. Paste fillers can also be designed to fill one or many containers at once. The most common type of paste fillers are piston paste fillers. Piston paste fillers utilize the draw back of a piston to pull product from a product hold tank into the piston. Once the piston is full, the rotary drum valve on the intake / discharge end of the piston rotates to direct product towards the paste filling nozzle. The rotary drum valve is used to connect the piston to either the product hopper or to the paste filling nozzle. (The size of the opening in the drum valve is often a good indication of the largest size particulate that can be process by the paste filler without degrading the particulate.) As the piston pushes forward, the product within the piston is push out of the piston, through the paste filling nozzle, and into the container. Once the piston is empty, the rotary drum valve rotates to connect the piston to the product hopper. The piston paste filler can then complete another cycle to fill another container (or group of containers). The maximum volume a particular machine can fill is determined by the volume of the piston. Pistons on a piston paste filler can be ???short stroked?? (not pulled back the entire way) to fill a smaller volume of paste. (???Short stroking?? a piston provides accurate fills to approximately 10% of maximum piston volume.) Also, different size pistons can be outfitted to a piston paste filler to provide different fill capacities for the machine.

Contact Us

Fillers - Paste Filling Equipment In Stock

Geyer Filler Paste Over 4 Head 6

  • Manufacturer: Geyer
  • Model Number: 6
  • Frain Number: 5D8211

Geyer 6 head inline piston filler rated from of 10 to 90 containers per minute – depending on materials and application. Currently equipped with 32 oz. pistons and 30 gallon hopper with low product sensor, timing screw, 8′ long x 4-1/2" wide in feed conveyor with cam operated right angle transfer, walking beam type index system, bottom up fill, and Plexiglas guarding.

OAD: 117"(L) x 92"(W) x 68"(H)

Get a Free Quote Call: 630-629-9900

Simplex Filler Paste Twin F

  • Manufacturer: Simplex
  • Model Number: F
  • Frain Number: 5D8121

Inline, 2 head piston filler, rated at speeds 4 to 20 containers per minute – depending on materials, application and machine configuration. Fill range of: 16 – 128 ounces. Equipped with 10′ indexing conveyor, 29" L x 20" W x 21" D, S/S product hopper and two one gallon stainless steel pistons with 1" ID nozzles set on 8" centers.
OAD: 125" L x 74" W x 76" H

Get a Free Quote Call: 630-629-9900

MRM Elgin Filler Paste Twin 2HD

  • Manufacturer: MRM Elgin
  • Model Number: 2HD
  • Frain Number: 5A3961

MRM Elgin, Model Twin, automatic two head inline piston filler. Rated from 10 to 40 cpm – depending on materials, application and machine configuration. Equipped with a 7½" wide x 75" long Delrin conveyor, 3" ID flanged product inlet, (2) 4" diameter x 12" long (64oz) pistons, (2) ¾" diameter nozzles set on 4" centers. Mounted on a painted base frame with mechanical variable speed controls.

OAD: 78"L x 31"W x 67"H

Get a Free Quote Call: 630-629-9900

Simplex Filler Paste Twin AS200

  • Manufacturer: Simplex
  • Model Number: AS200
  • Frain Number: 5F2137

Simplex Model AS200, twin piston filler, rated from 5 to 15 cycles per minute – speeds dependant on materials, application and machine configuration. Fill range: up to 8.9 oz . Equipped with 4-1/2" wide stainless steel Delran indexing conveyor, worm screw in feed, product hopper, positive cut-off 1/2" OD diving nozzles and PLC with swing arm panel.
(Capable of accepting pistons up to 45 oz.)
OAD: 124" L x 55" W x 85" H

Get a Free Quote Call: 630-629-9900

Volumetric Technologies Filler Paste Single TABLE TOP

Volumetric Technologies, semi-automatic, 316 stainless steel, single head, table top piston filler. Fill range: .03 oz to 16 oz. with proper change parts. Fill accuracy +/- .25 of 1% volume. Equipped with conical 5 gallon product hopper, 1½" ID piston (0.5 to 9.75 oz range), ½"ID positive cut off nozzle, adjustment with gauge, fill speed adjustment, toggle switch activation and foot pedal control.

OAD: 34"L x 15"W x 32"H

Get a Free Quote Call: 630-629-9900

Hope Filler Paste Twin M19S

  • Manufacturer: Hope
  • Model Number: M19S
  • Frain Number: 5B4106

Bottom Up, Two Head Filler, Currently equipped with two 8 oz pistons. Container height to 8". Equipped w/5" center and 6′ long inline walking conveyor, no container/no fill, 13 gal s/s jacketed hopper and s/s contact parts. Fill range: 2 – 16 oz with proper change parts. Last running topical anesthetic jelly.

Get a Free Quote Call: 630-629-9900

MRM Elgin Filler Paste Over 4 Head VERSA

  • Manufacturer: MRM Elgin
  • Model Number: VERSA
  • Frain Number: 5H1913

MRM Elgin Model Versa filler, automatic, stainless steel, 6-head, rotary time / pressure filler. Rated from 20 to 90 containers per minute – depending on materials, application and machine configuration. Container size range: 1" to 14" in height; 1" to 5½" in diameter. Equipped with a 132" long x 4½" wide stainless steel table top conveyor, starwheel infeed and discharge, (11/16)" OD nozzles set on 5¾" centers and a (1/8) hp positive displacement supply pump. Control panel with push button start / stop controls, variable speed dial and volume control dial. Mounted on a painted base.

OAD: 135"L x 40"W x 65"H

Get a Free Quote Call: 630-629-9900

Hinds Bock Filler Paste Twin 2P-64-WP-128

  • Manufacturer: Hinds Bock
  • Model Number: 2P-64-WP-128
  • Frain Number: 5G1873

Hinds-Bock Model 2P-64WP, dual piston filler / depositor with volume of product – depending on materials and application. Equipped with 30" long x 30" wide x 26" deep stainless steel product hopper, two 64oz pistons, with two 2" OD product positive cut-off nozzles both with sanitary fittings set on 16" centers, height adjustable column with current discharge height of 26" and mounted on 36" long x 32" wide, H style stainless steel base with casters and foot pedal controller.

OAD: 64" L x 32" W x 67" H

Get a Free Quote Call: 630-629-9900

Hinds Bock Filler Paste Quad 4P-12

  • Manufacturer: Hinds Bock
  • Model Number: 4P-12
  • Frain Number: 5F8957

Hinds-Bock�s 4P-12 automatic, stainless steel, 4 head, air operated piston filler with number of containers per minute – depending on materials and application. Size range: 0.1oz to 12 oz with proper change parts, Equipped with 46" long x 32" wide x 24" deep stainless steel product hopper (4) 2" ID x 7" long stainless steel air assist pistons, with rotary shut-off pneumatic package, e-stop. Mounted on H style base frame with casters.

OAD: 72" L x 50" W x 63" H

Get a Free Quote Call: 630-629-9900

Raque Filler Paste Quad PF2.5-4

  • Manufacturer: Raque
  • Model Number: PF2.5-4
  • Frain Number: 5F6749

Raque Model PF2.5-4, automatic, stainless steel, 4 head piston filler. Size range: 0.1oz to 62 oz with proper change parts, Equipped with 20" long x 20" wide x 24" deep stainless steel product hopper with paddle agitator and top cover. (4) 2" ID x 6" long stainless steel air assist pistons. Raque Model DL200 depositor with (4) 1-1/2" Diameter nozzles on 3" centers, Allen Bradley controller. Mounted on stainless steel base frame with casters. Speed dependant on materials, application and machine configuration.

Raque Model DL200 Depositor, Cup Holding Plates mounted on Conveyor System

OAD: 53" L x 44" W x 72" H 4 Head Piston Filler

Get a Free Quote Call: 630-629-9900

Simplex Filler Paste Quad AIR-QT

  • Manufacturer: Simplex
  • Model Number: AIR-QT
  • Frain Number: 5H0667

Simplex, Model Air-QT, (4) head semi-automatic piston filler. Rated from 5 to 20 strokes per minute with number of containers – depending on materials, application and operator dexterity. Equipped with 26" diameter x 24" deep product hopper (4) 1¼" ID x 10" long pistons with fill range up to 10 oz and ½" OD nozzles. Mounted on base frame with casters with foot pedal operation.

OAD: 60"L x 30"W x 70"H

Get a Free Quote Call: 630-629-9900

MRM Elgin Filler Paste Quad QUAD FILLER

  • Manufacturer: MRM Elgin
  • Model Number: QUAD FILLER
  • Frain Number: 5G6241

MRM Elgin, Model Quad Filler, Automatic four head inline piston filler. Capable of speeds up to 80 CPM. Unit has a max container width of ___" and a max height of ___". Intermittent motion filler is currently equipped with (4) ___" diameter pistons for a fill range from ___ oz to ___ oz, on 4" centers. Can run up to ___oz fill w/correct change parts. Has ___" diameter fill nozzles, and has a ___" long indexing conveyor with (4) ___" W lanes.

OAD: ___"L x ___"W x ___"H

Get a Free Quote Call: 630-629-9900