Filter Machines

Used Filter Equipment

Filters are designed to remove particles and other components from a flow of liquid or gas. Depending on the application for the filter, the desired output from a filtration process can be either the media (liquid or gas) without the filtered particles or the particles that have been removed from the media. Filters are designed for their intended application and are designed with a correspoding filtration spacing.

Filter Equipment In Stock

Huber Technology Inc Filter RO9

Huber, Model RO 9 300/1 V4A, 316 stainless steel auger microstrainer. Rated from 0 to 65 gallons per minute – depending on materials and application. Used to seperate and transport large solids from fluids. Equipped with 61" long x 15" wide x 30" deep (100 gallon) fluid tank with (1) 11½" OD / 6" ID 8 bolt pattern flanged charge port and (1) 14" OD / 8½" ID 8 bolt pattern flanged discharge port, 10" diameter x 150" long auger with 5" centers, 21" long screen section with 2mm openings and powered by a 1½ hp drive. Solids discharge through a 10" x 8½" chute with ___" ground clearance.

OAD: ___"L x ___"W x ___"H

Get a Free Quote Call: 630-629-9900

Parkson Corporation Filter Plate & Frame 4-4/8M

Waterlink (Lanco) Model 4-4/8M F2913, plate and frame filter press with (18) 24" x 24" x 2" polypropylene plates, Power Team hydraulic hand pump with mod B No. C10010C 10-1/4" stroke ram, Steel frame 28-1/4" x 120"L x 43"h, Stainless steel manifold with Apollo 2" fnpt ball valve,1-1/2" tri-clamp adaptor, 4-corner returns with (4) 1-1/2" butterfly valves, compressed air secondary squeezing (2" w x 6" casters in box).

OAD: 156" L x 38" W x 53" H

Get a Free Quote Call: 630-629-9900

Hycor / Parkson Filter Rotary RSA2572

Hycor, model RSA 01-04-72 Rotostrainer. Equipped with a 25"diameter x 72"long screen with 0 .75mm openings. The screen is externally fed through a 12"ID/16"OD 8-bolt pattern flange fitting. Product is directed under a baffle, then upward and over the length of the cylinder. Solids are caught on the outside of the screen surface and are removed by a self cleaning spring tensioned scrape blade. Product discharges out an open bottom. Rates dependant on materials, application, machine configuration and environment.

OAD: 49"L x 96"W x 36"H

Get a Free Quote Call: 630-629-9900

Hycor / Parkson Filter Rotary RSA2572

Hycor, model RSA 01-04-72 Rotostrainer. Equipped with a 25"diameter x 72"long screen with 0 .75mm openings. The screen is externally fed through a 12"ID/16"OD 8-bolt pattern flange fitting. Product is directed under a baffle, then upward and over the length of the cylinder. Solids are caught on the outside of the screen surface and are removed by a self cleaning spring tensioned scrape blade. Product discharges out an open bottom. Rates dependant on materials, application, machine configuration and environment.

OAD: 49"L x 96"W x 36"H

Get a Free Quote Call: 630-629-9900

Hycor / Parkson Filter Rotary RSA2572

Hycor, model RSA 01-04-72 Rotostrainer. Equipped with a 25"diameter x 72"long screen with 0 .75mm openings. The screen is externally fed through a 12"ID/16"OD 8-bolt pattern flange fitting. Product is directed under a baffle, then upward and over the length of the cylinder. Solids are caught on the outside of the screen surface and are removed by a self cleaning spring tensioned scrape blade. Product discharges out an open bottom. Rates dependant on materials, application, machine configuration and environment.

OAD: 49"L x 96"W x 36"H

Get a Free Quote Call: 630-629-9900

Siemens Ind Inc Filter Plate & Frame 630G3227-8DYLW

  • Manufacturer: Siemens Ind Inc
  • Model Number: 630G3227-8DYLW
  • Frain Number: 5F8946

Siemens / US Filtration Model J Press, plate and frame, filter press, Filtration area: 112 ft². Plate size: twenty eight 24" x 24" x 2" thick and 1/4" recessed polypropylene plates. Pressure rating: up to 100 psi. Equipped with a roll under filter product drip pan, and four 1-3/4" OD threaded inlet / outlets. Mounted on casters.

OAD: 130" L x 40" W x 54" H

Get a Free Quote Call: 630-629-9900

Dorr Oliver Filter Rotary

  • Manufacturer: Dorr Oliver
  • Model Number:
  • Frain Number: 5E8331

1700 gallon, 304 stainless steel, continuous motion, vacuum, drum filter with 6′ diameter x 8′ long,150 ft², drum. Equipped positive seals on drum ends and between drum compartments, fixed position blade scrap discharge, filter agitation, variable speed drive, (2) filter drains, and a 154"L x 7"dia screw discharge conveyor with 2.5" ribbons, 2"dia shaft, on 5" centers.

OAD: 196"L x 102"W x 96"H

Get a Free Quote Call: 630-629-9900

Millipore Filter Cartridge

  • Manufacturer: Millipore
  • Model Number:
  • Frain Number: 5D1940

156L BioChromatography production column for process purification in the pharmaceutical and biotechnology industries. Unit is equipped with Millipore’s distribution cell which assures uniform flow across the whole cross-sectional area of the column bed, which is essential for maximum efficiency, resolution and capacity. Resin media is sold separately by Millipore. Column has a pressure rating of 15 PSI and an adjustable height of 0 – 500mm. Quick release nuts simplify adjuster movement. Unit is designed with sanitary clamp connections, acrylic tubes for high solvent resistance and has the optional minimum-deadspace (MDS) inflatable seal. The seal provides a completely flush joint between the adjuster cell and the column wall. Column has a diameter of 630mm. Unit is mounted on casters for easy mobility. After last use, unit was cleaned and prepared for reuse by Centecor Pharmaceuticals.
OAD: 32" (Dia) x 40" (H)

Get a Free Quote Call: 630-629-9900

PCI Wedeco Filter G-14

  • Manufacturer: PCI Wedeco
  • Model Number: G-14
  • Frain Number: 5E6767

3 Ozone generator system capable of up to 42 lbs of ozone per day. Equipped with (3) Model G-14 generators. PCI Model LC ozone monitor with an LED display for concentration (in ppm), an Allen Bradley SLC 502 CPU, an operator interface with LED display, and each generator has a separate power source and lock-out, air conditioners for each generator, and controls for scfm air, air pressure and ozone output.

OAD: 202"L x 56"W x 88"H

Get a Free Quote Call: 630-629-9900

Parkson Corporation Filter HS36DF HYDROSCREEN

Parkson Hydroscreen Model HS36DF, liquid / solids separation system used in municipal and industrial applications for screening fibrous and nongreasy solids with dry weights of 800 lbs and operating weights of 3100 lbs. Compact design with no moving parts, motors, or complicated connections, simple and economical to operate one of the most basic Parkson screens, with high throughput, swinging baffle across the weir directs the flow for efficient screen operation. Unique bi-wave wedgewire screen panel, with double downward curves, increases the rapidly stripping of liquid from the influent as it hits the top of the screen panel, rapid shearing maximizes solids capture and minimizes screen blinding. Additional drainage occurs as the solids captured by the screen roll down the curved screen face. At the end of the screen panel is a drip lip that directs the drained liquid away from the solids and returns it to the filtrate chamber.
Headbox options, including deep flat and shallow tapered designs to accommodate solids loading.

OAD: 70"L x 62"W x 85"H

Get a Free Quote Call: 630-629-9900

Alar Engineering Corporation Filter Plate & Frame MICRO-KLEAN

Alar Model Micro-Klean Hydraulic, plate and frame, filter press rated at 20 minutes per filtration cycle. Equipped with eleven 19-1/4" Long x 19-14" Wide x 2-1/4" thick recessed polypropylene filtration plates, hydraulic opening and closing ram. Filtration area: 15.4ft². Volume: 2.3 ft³, with two 1-3/4" OD threaded top and two 1-3/4" OD threaded bottom outlets, PVC piping and mounted on four leg base frame. Dewatering system removes solids from wastewater and produces a clean effluent.

OAD: 91" L x 30" W x 56" H

Get a Free Quote Call: 630-629-9900

Millipore Filter P630X500X500

  • Manufacturer: Millipore
  • Model Number: P630X500X500
  • Frain Number: 5F5605

Millipore P630x500x500, Chromatography column. Column tube diameter: 630 mm. Column tube height: adjustable up to 50 cm. Capacity: 156 Liter. Operating pressure: up to 3.15 bar. Operating temperature: 0° C to 30° C. Process connection: 3/4" diameter. Slurry connection: 1" diameter. 316 Stainless steel and Acrylic construction. Mounted on locking casters.

OAD: 40" L x 40" W x 58" H

Get a Free Quote Call: 630-629-9900