Single Motion Machines

Used Single Motion Equipment

Single motion kettles are designed with a single motion agitator to mix the product. The type of agitator designed into a single motion kettle varies based on the application. Single motion kettle can be designed with side scrape or side sweep agitation.

Side scrape agitation has paddles or scrapers attached to a form shaped like an anchor that matches the size and shape of the kettle. The scrapers contact the inside of the kettle and will scrape the product off from the inner surface of the kettle. Side scrape agitation prevents product from seizing to the inside of the kettle and allows for more uniform cooking and processing of the entire batch. Paddles for side scrape agitation are normally made from plastic or brass.

Contact Us

Single Motion Equipment In Stock

Groen Kettle Single Motion 5GAL VAC COOKER

  • Manufacturer: Groen
  • Model Number: 5GAL VAC COOKER
  • Frain Number: 5F8923

Groen 5 gallon, 316 stainless steel, steam jacketed, lab / pilot plant vacuum cooker with mixer and tilt discharge. Equipped with 12" OD x 12" Deep product mixing bowl, dome top with bolt down hinged cover, top flange mounted air operated prop style mixer and bottom motor drive for side scrapers with (2) 2" OD site ports one with light, temperature probe, pressure gauge and (1) 1-1/2", (1) 1" OD threaded top ports. 1/2 jacket rated at MAWP 90 psi @ 338 Deg F , full internal vacuum rated to 29" HG and 1-1/2" OD threaded jacket port. Vacuum system with 2-1/2 Hp pump and pnuematic package and hand crank product tilt discharge. Control panel has light switch and vacuum pump controls with readout and mounted on 48" x 48" stainless steel H style base with casters.

National Board: 80217

OAD: 48" L x 48" W x 71" H

Get a Free Quote Call: 630-629-9900

Corrosion Fluid Products Kettle Single Motion MIX/MELT TANKS

Complete batching system (3) 100 Gallon, 304 stainless steel, hot water low pressure jacket single motion side scrap kettles with 2Hp, (3) positive displacement pumps, jacketed discharge piping, Each kettle has bulk feed funnels with lids, temperature probes. Vessel dimensions: 40" in Diameter; 24" Straight wall. Equipped with flip top covers, 2.5" OD top cover inlets, center bridge mounted scrape surface agitation, paddle shaped baffles, 1" OD jacket inlet/outlets, cone bottoms, injection ports, 4" sanitary discharges, 1/2 hp positive displacement pumps, recirculation system and mounted on 6 stainless steel legs base frame.

OAD: 144" L x 96" W x 84" H

Get a Free Quote Call: 630-629-9900

Lee Kettle Single Motion 30 GAL

  • Manufacturer: Lee
  • Model Number: 30 GAL
  • Frain Number: 5E7328

30 Gallon, 316 S/S, single motion, internal pressure rated kettle. Dimensions: 30" ID x 28" Deep. Jacket rating: 90 psi @ 330 deg F. Internal pressure rating: 15 psi. Equipped with scrape surface agitator, bolt down cover with hydraulic lift, two 2-1/2" OD one 1-1/2" OD, one 1" OD top ports and one 4" OD and one 2" OD site ports and 2-1/2" OD sanitary center bottom discharge at 20" floor clearance.

OAD: 64"L x 45" W x 68" H

Get a Free Quote Call: 630-629-9900

Hubert Kettle Single Motion 100 HIK

  • Manufacturer: Hubert
  • Model Number: 100 HIK
  • Frain Number: 5G8003

Hubert, 100 gallon capacity, 304 stainless steel jacketed kettle. Vessel dimensions: 35" diameter x 30" deep with a 13" straight wall. Equipped with flip up covers, lift out grate, temperature guage, Variable speed 1.74 Hp side mounted hydrofoil agitator with 2½" OD / 2" ID Tri-clamp style bottom discharge and 28" ground clearance. Mounted on a stainless steel platform with Mettler Toledo load cells and a Waukesha, model 2065, variable speed centrifugal pump powered by a 5 hp drive.

Top Ports:
(1) 1½" NPT
(1) ¾" NPT
(1) 2½"OD / 2"ID Tri-clamp

Jacket Ports:
(3) 1" NPT
(1) ¾" NPT

MAWP: 100 PSI @ 337°F
Nat’l Brd: 6087

OAD: 58"L x 46"W x 95"H

Get a Free Quote Call: 630-629-9900

J C Pardo & Sons Inc Kettle Single Motion 200 GAL

J C Pardo, 200 gallon capacity, 316 stainless steel jacketed kettle. Vessel dimensions: 46" diameter x 40" deep with 18" straight wall. Equipped with flip up covers, pressure sensor, 6" wide baffle, and chart recorder. 3 Hp side mounted slant scrape agitator with 3½" OD / 3" ID tri-clamp style bottom discharge and 16½" ground clearance.

Top Ports:
(1) 6" open vent
(1) 2½" open vent

Jacket Ports:
(4) 1¼" NPT
(1) 1" NPT

MAWP: 100 PSI @ 338°F
MDMT: -20°F @ 100 PSI
Nat’l Brd: 2498

OAD: 72"L x 60"W x 87"H

Get a Free Quote Call: 630-629-9900

Groen Kettle Single Motion 100 GAL RA

  • Manufacturer: Groen
  • Model Number: 100 GAL RA
  • Frain Number: 5G7375

Groen, Model RA100, 100 gallon 316 stainless steel half jacketed mixing kettle. Vessel Dimensions: 35" diameter x 32" deep with a 13" straight wall. Equipped with top bridge mounted 1½ hp scrape surface agitation with dual stationary baffles. Dish bottom with 2½"OD / 2"ID tri-clamp style discharge with 17" ground clearance. Mounted on (3) hip socket leg base.

Top Fittings:
(1) 2"OD / 1½"ID tri-clamp
(1) 2"OD / 1¼"ID seated bevel
(1) 1¼" ID open vent

Jacket Fittings:
(4) 1" NPT

MAWP: 45 PSI @ 300° F
MDMT: -20°F @ 45 PSI
Nat’l Brd: 138611

OAD: 42"L x 40"W x 70"H

Get a Free Quote Call: 630-629-9900

Chester Jensen Kettle Single Motion 500 GAL X70N50

  • Manufacturer: Chester Jensen
  • Model Number: 500 GAL X70N50
  • Frain Number: 5G6480

Chester Jensen, Model X70N50, 500 gallon capacity, 304 stainless steel bottom jacketed and insulated process tank. Vessel dimensions: 72" diameter x 48" deep with a 30" straight wall and cone bottom. Equipped with lift up covers, 5 Hp top mounted bottom scrape agitator, (1) 1" NPT bottom fitting with 18" ground clearance and (1) 4½" OD / 4" ID tri-clamp style bottom discharge with 20" ground clearance.

Top Ports:
(2) 2½"OD / 2"ID Tri-clamp
(2) 2"OD / 1½"ID Tri-clamp
(1) 2"OD / 1½"ID Seated Bevel
(1) 2" open vent

Jacket Ports:
(2) 2" NPT

MAWP: 100 PSIG @ 340°F

OAD: 79"L x 75"W x 88"H

Get a Free Quote Call: 630-629-9900

Groen Kettle Single Motion DA300SP

  • Manufacturer: Groen
  • Model Number: DA300SP
  • Frain Number: 5G5851

Groen, Model DA-300 SP, 300 gallon, 316 stainless steel, jacketed kettle. Vessel dimensions 54" diameter x 44" deep. Equipped with bridge mounted scrape surface agitation powered by 1 Hp motor drive, level sensors, with lift up covers and 3½"OD / 3"ID tri-clamp style discharge with 90° elbow and ball valve with 6" ground clearance. Mounted on (4) tubular legs.

Jacket Fittings:
(4) 1¼" NPT

MAWP: 125 PSI @ 353° F
Nat’l Brd: 74794

OAD: 58"L x 55"W x 115"H

Get a Free Quote Call: 630-629-9900

Hamilton Kettle Single Motion 100GAL

  • Manufacturer: Hamilton
  • Model Number: 100GAL
  • Frain Number: R26771

Hamilton, 100 gallon, 316 stainless steel, ½ jacketed, slant mixing kettle. Vessel Dimensions: 38" Diameter x 31" Deep with a 13" straight wall mixing bowl. Equipped with slanted scrape surface agitator powered by 2 Hp motor, tilt out agitation. ½ jacket rated for 100 psi @ 328°F. with (2) 1½" NPT inlet and (2) 1½" NPT outlet jacket ports. 3½" OD/3"ID I-Line style bottom discharge with 17" floor clearance. Mounted on (3) stainless steel legs.

Nat’l Brd: 6782
MAWP: 100 PSI @ 328°F
MDMT: -20°F @ 100 PSI

OAD: 60"L x 45"W x 77"H

Get a Free Quote Call: 630-629-9900

Groen Kettle Single Motion 250 GAL SP RA

  • Manufacturer: Groen
  • Model Number: 250 GAL SP RA
  • Frain Number: R26820

Groen, model RA250 SP, 250 gallon 316L stainless steel 1/4 jacketed kettle. Jacket rated to 100psi @ 338°F. with (3) 1" and (4) 1½" threaded inlets / outlets. Equipped with 45" diameter and 34" straight wall. Bridge mount with (1) 1¾"ID and (1) ¾"ID seated bevel thread fittings, (1) temp probe and scrape aggitation powered by a 2HP drive. Flip top covers with (1) 5¾"ID open vent, (1) 1¾" seated bevel thread fitting and (1) lift out grate cover. Mounted on (3) tubular legs with a 3¾"ID center bottom discharge and 21" ground clearence.

National Board #: 61104
OAD: 50" L x 50" W x 101" H

Get a Free Quote Call: 630-629-9900

Groen Kettle Single Motion 200 INA

  • Manufacturer: Groen
  • Model Number: 200 INA
  • Frain Number: 5G4064

Groen 200 gallon, 316 stainless steel jackated tank. Vessel Dimenstions: 48" ID by 42" deep. Vessel specifications: MAWP: 100 psi @ 338°F, MDMT: -20°F @ 100 psi. Equipped with 33" ID top opening with flip top lid, angled bridge mount agitation with scrape surface mixing blade, fixed 14" wide by 20" deep baffle, temperature probe, (2) 1-1/4" ID threaded ports in bridge, (2) 2-1/2" OD (1-7/8" ID) sanitary ports in bridge, 6" ID vent, bottom half jacket with (2) 1-3/4" ID threaded ports, 1-1/4" ID threaded port, and 5-1/2" OD sanitary center bottom discharge with -2" ground clearance. Mounted on (4) stainless steel legs. National Board: 138666

OAD: 54" L x 54" W x 80" H

Get a Free Quote Call: 630-629-9900

Groen Kettle Single Motion 150 SA F S9

  • Manufacturer: Groen
  • Model Number: 150 SA F S9
  • Frain Number: R26632

Groen, model SA-F-150-SP, 150 gallon 316 stainless half jacketed kettle. Vessel Dimensions: 42" diameter x __" deep with a 14" straight wall. Equipped with top mount full sweep agitator with scrappers powered by a 5 Hp drive, lift off covers, (1) 1¼" threaded fitting for flush mount accessory, (3) 1½" threaded jacket inlets, (1) ½" threaded jacket inlet and a 2½"OD/2"ID diameter tri-clamp pneumatic valve discharge with 20" ground clearance. Mounted on (3) tubular legs.

MAWP: 90 PSI @ 338° F
Nat’l Brd: 45340

OAD: 45"L x 45"W x 78"H

Get a Free Quote Call: 630-629-9900