Band Machines

Used Band Equipment

Premade bags are ideal for many packing operations. They can be hand or machine loaded but then the open top needs to be sealed. Band sealers are just the thing for this. They will work with a variety of bag materials provided always that the inside of the bag material is heat sealable.

bag-band-sealers

The band sealer consists of a conveyor to support the bag and a pair of thin, horizontal fiberglass belts, facing each other and running in the same direction. Heating and cooling sections are located behind and in direct contact with the belts on either side.

The product is placed on a conveyor that is running in synchronization with the sealer. The top portion of the bag is manually straightened to eliminate wrinkles and guided between the two belts. As the belts grip the bag, the operator releases it and lets the sealer and conveyor do the rest of the work.

As the bag enters the heated section of the sealer, heat is transferred through the belts to the bag. Springs press the belts and plates against the bag with a controlled force. The combination of belt pressure, heater temperature, and speed (dwell time) determine the quality of the seal.

Immediately after sealing, the seal is still hot and has not yet set up. Any stress on it at this point could result in failure. After leaving the heated section of the sealer, the bag, still gripped by the sealing belts and supported by the conveyor enters a cooling section. This consists of cooling blocks, cooled by circulating air around them. As the bag is carried through the cooling section, the seal is cooled to near room temperature and takes a permanent set.

The conveyor, moving at the same speed holds the bag straight while in the sealer.

An optional feature on some bag sealers is a cut-off to remove excess bag material above the seal.

Another option is an integrated coder to apply a lot number, expiration date or other variable information. This can be debossing wheel or an inkjet printer.

Contact Us

Band Equipment In Stock

Bandrite Sealer Bag Band 6000

  • Manufacturer: Bandrite
  • Model Number: 6000
  • Frain Number: R27201

Bandrite, Model 6000-4240-000, automatic, continuous motion, band style, bag sealer. Rated from 0 to 750 inches per minute with number of product – depending on materials and application. Equipped with bag trim station, 1 line coder, ¾" wide heat sealing bar and cooling bar, angled sealing and tilt away drive head, non-marking carrier belts with adjustable running speeds and temperature controls up to 600 Deg F. Hand crank height adjustable for different size bags. Includes a 6" wide x 100" long belt conveyor with adjustable guides and powered by a ¼ Hp drive.

OAD: 110"L x 40"W x 59"H

Get a Free Quote Call: 630-629-9900

Bandrite Sealer Bag Band 6000

  • Manufacturer: Bandrite
  • Model Number: 6000
  • Frain Number: R27200

Bandrite, Model 6000, automatic, continuous motion, stainless steel, band style, bag sealer. Rated from 0 to 750 inches per minute with number of product – depending on materials and application. Equipped with bag trim station, 1 line coder, ¾" wide heat sealing bar and cooling bar, angled sealing and tilt away drive head, non-marking carrier belts with adjustable running speeds and temperature controls up to 600 Deg F. Hand crank height adjustable for different size bags. Includes a 6" wide x 100" long belt conveyor with adjustable guides and powered by a ¼ Hp drive.

OAD: 110"L x 40"W x 59"H

Get a Free Quote Call: 630-629-9900

Bandrite Sealer Bag Band 6000

  • Manufacturer: Bandrite
  • Model Number: 6000
  • Frain Number: R26960

Bandrite, Model 6000-4240-000, automatic, continuous motion, band style, bag sealer. Rated from 0 to 750 inches per minute with number of product – depending on materials and application. Equipped with bag trim station, 1 line coder, ¾" wide heat sealing bar and cooling bar, angled sealing and tilt away drive head, non-marking carrier belts with adjustable running speeds and temperature controls up to 600 Deg F. Hand crank height adjustable for different size bags. Includes a 6" wide x 100" long belt conveyor with adjustable guides and powered by a ¼ Hp drive.

OAD: 110"L x 40"W x 59"H

Get a Free Quote Call: 630-629-9900

Bandrite Sealer Bag Band 6000

  • Manufacturer: Bandrite
  • Model Number: 6000
  • Frain Number: R26581

Bandrite, Model 6000, automatic, continuous motion, band style, bag sealer. Rated from 0 to 750 inches per minute with number of product – depending on materials and application. Equipped with bag trim station, 1 line coder, ¾" wide heat sealing bar and cooling bar, angled sealing and tilt away drive head, non-marking carrier belts with adjustable running speeds and temperature controls up to 600 Deg F. Hand crank height adjustable for different size bags. Includes a 6" wide x 100" long belt conveyor with adjustable guides and powered by a ¼ Hp drive.

OAD: 108"L x 38"W x 63"H

Get a Free Quote Call: 630-629-9900

Bandrite Sealer Bag Band 6000

  • Manufacturer: Bandrite
  • Model Number: 6000
  • Frain Number: R26580

Bandrite, Model 6000, automatic, continuous motion, band style, bag sealer. Rated from 0 to 750 inches per minute with number of product – depending on materials and application. Equipped with bag trim station, 1 line coder, ¾" wide heat sealing bar and cooling bar, angled sealing and tilt away drive head, non-marking carrier belts with adjustable running speeds and temperature controls up to 600 Deg F. Hand crank height adjustable for different size bags. Includes a 6" wide x 100" long belt conveyor with adjustable guides and powered by a ¼ Hp drive.

OAD: 108"L x 38"W x 63"H

Get a Free Quote Call: 630-629-9900

Doboy Sealer Bag Band CBSCH

  • Manufacturer: Doboy
  • Model Number: CBSCH
  • Frain Number: 5G3771

Doboy Model CBS-CH, continuous, chain fed, band sealer rated from 0 to 425" per minute with number of product – depending on materials, application, and operator dexterity. Equipped with two sets of 3/8" wide heat sealing bars and one water chilled cooling bar with angled sealing tilt drive head, 1" wide metal bands, flip up safety cover and chain thru carrier for bag support, trimmer and height adjustable. Control panel has heater 1 and heater 2 temperature controllers, on / off heat switch with start / stop push button controls. Mounted on base frame over 12" wide x 130" long belt product conveyor.

OAD: 130" L x 50" W 78" H

Get a Free Quote Call: 630-629-9900

Doboy Sealer Bag Band B450

  • Manufacturer: Doboy
  • Model Number: B450
  • Frain Number: R26330

Doboy Model B450, right to left, continuous band bag sealer, rated from 0 to 450" per minute with number of bags – depending on material, application, machine configuration and operator dexterity. Equipped with 76" long x 6" wide bag conveyor, trimmer, four position vertical to horizontal sealing head with 1/8" wide heat seal bars and (1) set of air chilled cooling bars with 21" long x 1" wide Teflon carrier band and flip up safety cover. Control panel has machine, heat and conveyor on / off switches, temperature heat controller with digital read out and conveyor speed control dial. Mounted on height adjustable base frame with casters

OAD: 76" L x 30" W x 68" H With Conveyor

Get a Free Quote Call: 630-629-9900

Doboy Sealer Bag Band CBSCH

  • Manufacturer: Doboy
  • Model Number: CBSCH
  • Frain Number: 5G4600

Doboy, Model CBS-CH, right to left continuous chain fed band sealer rated from 0 to 425" per minute with number of product depending on materials, application and operator dexterity. Equipped with trimmer, (2) sets of ¼" wide heat sealing bars and (1) water chilled cooling bar, tilt head, 1" wide metal bands, flip up safety cover and chain thru carrier for better bag support. Control panel with heater 1 and heater 2 temperature controllers and on / off heat switch. Mounted on base frame with casters and hand crank height adjustment; includes a 8" wide x 142" long Hytrol belt conveyor.

OAD:142" L x 55" W x 62 " H

Get a Free Quote Call: 630-629-9900

Doboy Sealer Bag Band CBSCH

  • Manufacturer: Doboy
  • Model Number: CBSCH
  • Frain Number: 5G4601

Doboy, Model CBS-CH, left to right continuous chain fed band sealer rated from 0 to 425" per minute with number of product – depending on materials, application and operator dexterity. Equipped with trimmer, (2) sets of ¼" wide heat sealing bars and (1) water chilled cooling bar, tilt head, 1" wide metal bands, flip up safety cover and chain thru carrier for better bag support. Control panel with heater 1 and heater 2 temperature controllers and on / off heat switch. Mounted on base frame with casters and hand crank height adjustment; includes a 12" wide x 130" long Hytrol belt conveyor.

OAD:130" L x 55" W x 64" H

Get a Free Quote Call: 630-629-9900

Doboy Sealer Bag Band CBSB

  • Manufacturer: Doboy
  • Model Number: CBSB
  • Frain Number: 5G4602

Doboy, Model CBS-B, right to left, continuous band sealer rated from 0 to 425" per minute with number of product depending on materials, application, machine configuration and operator dexterity. Equipped with two sets of 1/3" wide heat sealing bars and one cooling bar, tilt head, 1" wide metal bands and flip up safety cover. Control panel with heater 1 and heater 2 temperature controllers and on / off heat switch. Mounted on base frame with casters and height adjustment. Includes a 9½" wide by 90" long conveyor.

Markem coder available at an additional cost.

OAD: 90" L x 40" W 73" H

Get a Free Quote Call: 630-629-9900

Doboy Sealer Bag Band B500M

  • Manufacturer: Doboy
  • Model Number: B500M
  • Frain Number: 5G4410

Doboy Model B500M, automatic, right to left continuous, medical grade band bag sealer rated from 0" to 500" per minute with number of bags – depending on materials, application, machine configuration and operator dexterity. Equipped with 1" wide non-marking teflon carrier bands, angled, tilt away sealing head, with (1) set of 3/4" wide heat sealing bars and (1) set of 3/4" air cooling bars with flip up safety cover. Control panel has heater 1 and heater 2 temperature controllers, on / off heat switch, machine and speed control dial with vari speed controller and e-stop. Mounted on hand crank height adjustable base frame with casters and 84" long x 7-1/8 wide product belt conveyor.

OAD: 84" L x 32" W x 60" H

Get a Free Quote Call: 630-629-9900

Bandrite Sealer Bag Band 6000

  • Manufacturer: Bandrite
  • Model Number: 6000
  • Frain Number: R25730

Bandrite Model 6000, automatic, continuous motion, band style, bag sealer rated from 0 to 750 inches per minute with number of product – depending on materials and application. Equipped with bag trim station, 1 line coder, 3/4" wide heat sealing bar and cooling bar, angled sealing and tilt away drive head, non-marking carrier belts with adjustable running speeds and temperature controls up to 600 Deg F. Hand crank height adjustable for different size bags and mounted on casters for mobility to roll over any existing conveyor system.

OAD: 60" L x 24" W x 60" H

Get a Free Quote Call: 630-629-9900