Overwrap, Bar Machines

Used Overwrap, Bar Equipment

Overwrap bar wrappers are designed to place a wrap over a product that has already been enclosed within packaging. Similar to putting a film wrap around a soap bar already in a carton. This may be a paper or film wrapper over a carton, box or an additional wrap, to provide extra protection, decoration, or transparent design overlay.

Overwrap, Bar Equipment In Stock

Package Machinery Wrapper Overwrap, Bar U100

Package Machinery, Model U-100, horizontal overwrapper capable of wrapping trays, boxes, and bundles from 10 to 30 packages per minute – depending on materials and application. Package size range: 5" to 9" in Length; 2" to 10" in Width; 3/4" to 5" in Height, with maximum roll Width of 20", United inches including wrap cannot exceed 20". Fully adjustable unit equipped with start / stop / jog control, set on 14-1/2" centers. Includes a 18" long shrink tunnel with a 16" wide x 8" high aperture with an on/off switch.

OAD: 123"L x 50"W x 75"H

Get a Free Quote Call: 630-629-9900

Sollas Wrapper Overwrap, Bar S20

  • Manufacturer: Sollas
  • Model Number: S20
  • Frain Number: 5G2832

Sollas Model S20 over wrapper rated from 10 to 50 cycles per minute – depending on materials, application and machine configuration. Product size range: 45mm to 300mm in Length; 40mm to 200mm in Width; 16mm to 95mm in Height. Film: PP – PVC cellophane, 20 micron and up with film widths from 50mm to 420mm and maximum film diameter of 330mm. Equipped with 60" long x 15" wide right angle product in feed conveyor, product pusher bar, hot cut-off knives and side seal plates, static eliminator, and 60" long x 15" wide product discharge conveyor. Control panel with run, jog, film feed, side pusher bar on / off control switches with seal bar and seal plate temperature controllers and safety guarding. Mounted on casters.

OAD: 140" L x 132" W x 76" H

Get a Free Quote Call: 630-629-9900

Package Machinery Wrapper Overwrap, Bar CA2

Package Machinery Model CA2, automatic carton over wrapper and end fold heat sealing machine rated from 20 to 80 cartons per minute – depending on materials and application. Package Size Range: 1" to 4-1/4" in Length; 5/8" to 3-1/2" in Width; 3/8" to 1-1/4" in Height. Equipped with 44" long lugged in feed conveyor set on 3" centers, 10" film roll, with film cutoff, seal bars and brush box with 24" long lugged discharge conveyor set on 3" centers and pack off table. Push button start / stop controls, interlock safety guarding. Mounted on (4) leg base frame with locking casters. Will accept most cellophane film and does a side seam seal similar to cigarette package wrap.

OAD: 152" L x 48" W x 62" H

Get a Free Quote Call: 630-629-9900

Scandia Wrapper Overwrap, Bar 626

  • Manufacturer: Scandia
  • Model Number: 626
  • Frain Number: 5F7056

Scandia Model 626, automatic, overwrapper, for single or multi-packs rated from 40 to 120 packages per minute – depending on materials and application Package size range: 2" to 6-7/8" in Length; 3-1/4" to 8" in Width; 5/16" to 2" in Height and capable of running heat sealable, cellophane, or polyproplene films. Equipped with 7-3/4′ long x 5-1/4" wide product feed chute, 80" long in feed and 42" long right angle discharge conveyors, no package / no film, film is cut from the film roll, by a rotary knife cutting against a stationary knife, immediately after the carton goes thru film and both are trapped between bottom and top plates for positive film positioning, tear strip apllicator, top / bottom folders and tuckers, lugged top chain assist conveyor, top plate and side heat sealers. Control panel with heat seal, static eliminator, web speed, start, stop, e-stop controls and interlock safety guarding.

OAD: 140" L x 58" W x 74" H

Get a Free Quote Call: 630-629-9900

Scandia Wrapper Overwrap, Bar 626

  • Manufacturer: Scandia
  • Model Number: 626
  • Frain Number: 5F7055

Scandia Model 626, automatic, overwrapper, for single or multi-packs rated from 40 to 120 packages per minute – depending on materials and application Package size range: 2" to 6-7/8" in Length; 3-1/4" to 8" in Width; 5/16" to 2" in Height and capable of running heat sealable, cellophane, or polyproplene films. Equipped with 5-3/4′ long x 5-1/4" wide product feed chute, 45" long in feed and 36" long right angle discharge conveyors, no package / no film, film is cut from the film roll, by a rotary knife cutting against a stationary knife, immediately after the carton goes thru film and both are trapped between bottom and top plates for positive film positioning with top / bottom folders and tuckers, lugged top chain assist conveyor, top plate and side heat sealers. Control panel with heat seal, static eliminator, web speed, start, stop, e-stop controls and interlock safety guarding.

OAD: 108" L x 58" W x 65" H

Get a Free Quote Call: 630-629-9900

Scandia Wrapper Overwrap, Bar 626

  • Manufacturer: Scandia
  • Model Number: 626
  • Frain Number: 5F7054

Scandia Model 626, automatic, overwrapper, for single or multi-packs rated from 40 to 120 packages per minute – depending on materials and application Package size range: 2" to 6-7/8" in Length; 3-1/4" to 8" in Width; 5/16" to 2" in Height and capable of running heat sealable, cellophane, or polyproplene films. Equipped with 5-3/4′ long x 5-1/4" wide product feed chute, 45" long in feed and 36" long right angle discharge conveyors, no package / no film, film is cut from the film roll, by a rotary knife cutting against a stationary knife, immediately after the carton goes thru film and both are trapped between bottom and top plates for positive film positioning, tear strip apllicator, top / bottom folders and tuckers, lugged top chain assist conveyor, top plate and side heat sealers. Control panel with heat seal, static eliminator, web speed, start, stop, e-stop controls and interlock safety guarding.

OAD: 108" L x 58" W x 67" H

Get a Free Quote Call: 630-629-9900

Campak/Tecnicam Wrapper Overwrap, Bar G60

Campak G60, Die Fold Style over wrapper rated from 20 to 60 strokes per minute – depending on materials and application. Size range of: Product: 50-200mm (L) x 20-280mm (W) x 12-85mm (H). Bundle: 50-250mm (L) x 50-280mm (W) x 30-150 (H). S/S unit equipped with 8" wide in-feed conveyor, up-stacker and PLC controls. Markem coder available at additional cost.

OAD: 96"L x 48"W x 72"H

Get a Free Quote Call: 630-629-9900

Scandia Wrapper Overwrap, Bar 607RE

  • Manufacturer: Scandia
  • Model Number: 607RE
  • Frain Number: 5E6560

Scandia Model 607RE, automatic, cut, overwrapper, for single or multi-packs rated from 80 to 200 packs per minute – speeds depending on materials and application. Package size range: 7/8" to1 3/4" in Length x 2-1/4" to 8" in Width x 7/16" to 1" in Height. Film size range: 2-1/2" to 4-5/8" in Length x 3-1/2" to 10-1/4" in Width and capable of running both heat sealable, cellophane, or polyproplene films with proper change parts. Equipped with 30" long lugged chain infeed and 44" long right angle lugged chain seal and discharge conveyors set on 18" centers, with 34" in feed and discharge heights. Dual film rolls, rotary knife, tuckers, top and bottom folders, top plate and side heat sealers, no package / no film, with individual heat seal, static, web speed controls with start stop, e-stop and mechanical clutch. Designed to do cigarette style wrap.

OAD: 80" L x 66" W x 80" H

Get a Free Quote Call: 630-629-9900

Pester Wrapper Overwrap, Bar PEWO-FOLD

  • Manufacturer: Pester
  • Model Number: PEWO-FOLD
  • Frain Number: 5E6163

Pester Pewo-Fold, Automatic collator / overwrapper / bundler rated from 15 to 45 cycles per minute and of packages from (2 1/2" – 9 1/4")L by up to 14"W by (3/4" – 5 1/2")H. Max seal width of 15 3/4"W and film roll up to 16"W. Currently set for package 2 1/2"L x 1 1/4"W x 5/8"H with 6"W film roll and easy-tear red strip. Equipped with metric scales for adjustments, empty roll sensor, barrier guarding with electrical interlocks, and push button digital display controls. Mounted on screw down feet with casters. Date coder available at additional cost.

OAD: 146"L x 78"W x 88"H

Get a Free Quote Call: 630-629-9900

Scandia Wrapper Overwrap, Bar 710-RE

  • Manufacturer: Scandia
  • Model Number: 710-RE
  • Frain Number: 5F6220

Scandia 710-RE, Automatic, turret type, over wrapping machine rated from 40 to 120 packages per minute – depending on materials and application. Package size range: 1-5/8" to 3-1/4" in Length; 3-1/2" to 7-1/2" in Width; 5-8" to 1-1/4" in Height. Equipped with a 32" high package magazine, 16" long top chain transfer section, pusher bar, film feed head, knife film cutting section, 6 station rotary turret, film tuckers, 36" long lugged delivery chain, cam driven top heating station, tear tape applicator, side tuckers and folders, 18" long dual heating section, Direct Logic PLC, interlocking Lexan guarding, and a touch pad operator interface with visual display. Mounted on height adjustable legs. Film specifications: web 2-1/2" to 9-1/2"; Cut off 1-5/8" to 3-1/4".

OAD: 124" L x 42" W x 88" H

Get a Free Quote Call: 630-629-9900

Marden Edwards Wrapper Overwrap, Bar L60FF

Marden Edward L60FF, Automatic, inline, over wrapper rated from 20 to 50 ppm – depending on materials and application. Package size range: 40mm – 150mm L x 75mm – 305mm W x 17mm – 120mm H. can be run both intermittent, or continuous, with a min /max draw of 120mm – 450mm. Draw range: 120mm to 450mm. Equipped with a 58" in feed conveyor, product upstack, no pack / no wrap, static elimination, film registartion, jog adjustment, low level film spindle, dual end heat seal plates and saftey guarding. Film specifications: up to 18" film reel with 1 1/2" dia core,

OAD: 141" L x 48" W 79" H

Get a Free Quote Call: 630-629-9900

Marden Edwards Wrapper Overwrap, Bar L60FF

Marden Edward L60FF, Automatic, inline, over wrapper rated from 20 to 50 ppm – depending on materials and application. Package size range: 40mm – 150mm L x 75mm – 305mm W x 17mm – 120mm H, can be run both intermittent, or continuous, with a min /max draw of 120mm – 450mm. Has a 58" L x 12" W canvas product infeed conveyor with 26" infeed height, product upstaker, no pack / no wrap, static elimination, film registartion, hand wheel jog adjustment, low level film spindle, 18" L film reel with 1 1/2" dia core, dual 36" L x 5 7/8" H powered end heat seal plates, with 36" discharge height, control panel with lateral, right / left, end heat seal, conveyor speed, jog / run, registration, start / stop control buttons, with e-stop, status light bar and saftey guarding.

OAD: 141" L x 48" W 78" H

Get a Free Quote Call: 630-629-9900