Shanklin Machines


Shanklin Machines In Stock

Shanklin Shrink Auto L Bar A27A

  • Manufacturer: Shanklin
  • Model Number: A27A
  • Frain Number: 5H6790

Shanklin, Model A27A, automatic, in line, stainless steel, L-bar sealer with T-7XL shrink tunnel rated from 10 to 25 packages per minute – depending on materials and application. Package size range: 2¾" to 33" in length; to 17" in width; to 8" in Height. Equipped with 36" long x 17½" wide in feed conveyor and 40" long x 19½" wide product thru seal area and discharge conveyor. side mounted film rollers has maximum center fold film of 26" in width with powered film rollers and perf pin wheels. Film former with 28" long x 19" wide L-bar and hot knife seal jaws. Control panel has A/B controller with touch pad controls and read out, A/B vari-speed controller, with start, stop, manual, reset, front and cross seal heat controls, conveyor speed dial, scrap removal controls with e-stops. Mounted on stainless steel frame with flip-up safety guarding and locking casters
Shanklin, Model T-7XL, stainless steel, automatic single zone shrink tunnel with number of product per minute – depending on materials and application Aperture: 8" in Height; 22" in Width. Tunnel: 42" in Length. Equipped with 15" wide x 58" long steel mesh belt, top mounted blower motor and bottom conveyor heater. Control panel has temperature controller with range of 50° F to 500° F, on / off heat switch and conveyor speed control dial. Mounted on (4) leg base frame with casters.

Film Re-wind available at additional cost.

OAD: 84" L x 60" W x 53" H L-Bar Sealer
60" L x 43" W x 70" H Tunnel

Get a Free Quote Call: 630-629-9900

Shanklin Shrink Flow Thru HS2

  • Manufacturer: Shanklin
  • Model Number: HS2
  • Frain Number: 5D9591

Semi-automatic, flow-thru shrink wrapper capable of up to 120 linear feet per minute. Packages: (3" – 60")L x (2" – 16")W x (3/8" – 6")H. Has 18′ long dual chain adjustable lug in feed, 19" wide wire cross seal jaw, film perf wheel, 40" max film width, 34"L x 16"W vacuum transfer belt (forming box to cross seal), E-stop, Allen Bradley PLC, three temperature controllers, integrated vacuum pump, and barrier guarding with electrical interlock.

OAD: 292"L x 57"W x 70"H

Get a Free Quote Call: 630-629-9900

Shanklin Shrink Flow Thru HS3

  • Manufacturer: Shanklin
  • Model Number: HS3
  • Frain Number: 5E0781

Automatic high speed, flow thru side seal shrink wrapper capable of speeds from 10 to 200 ppm – depending on materials and application. Package size range of : 2" – 15" in Length; 2" – 16" in Width; 1/8 – 3" in Height. Equipped with lugged product in feed, perf wheel, 16" wide cross seal, scrap film rewind and discharge conveyor. A/B controller. Film rolls up to 28" wide x 12" diameter.

OAD: 144" L x 52" W x 56" H

Get a Free Quote Call: 630-629-9900

Shanklin Shrink Flow Thru HS4S

  • Manufacturer: Shanklin
  • Model Number: HS4S
  • Frain Number: 5H3560

Automatic high speed flow through wrapper rated up to 200 feet per minute. Size range: 2" to 15" in length; 2" to 16" in width; 3/8" to 3" in height. Equipped with 12" centers, 18"W walking beam seal bar, 16"W vacuum conveyor and discharging at 38". Also features, AB PLC, control panel that includes pkg/min, in/min, variable speed conveyor, heat seal, single multiple, reverse/forward, film tensioner, 27"L x 10-1/2"W neoprene infeed conveyor, max film width 40" flat / single wound, static seal, hot wire transverse seal

Get a Free Quote Call: 630-629-9900

Shanklin Shrink Flow Thru F1

  • Manufacturer: Shanklin
  • Model Number: F1
  • Frain Number: 5E4152

Automatic, continuous motion, flow thru shrink wrapper capable of speeds from 20 to 50 ppm or 60 linear feet per min depending on size, and shape of product. Package size range of: 6" – 48" L x 2" – 16" W x 1/8" – 6" H, has side film unwind, with a max film width of 22" folded, and 44" flat, with (2) 17" L x 13" W neopreme belt product feed conveyors belts, 18" L hot knife seal jaw, and 12" L side seal. A/B PLC, with touch pad control panel, (2) individual 77" L x 16" W canvas belt infeed conveyors, and a 36"L x 12" W neopreme belt discharge conveyor with 36" infeed / discharge heights, and vari-speed controllers.

OAD: 330" L x 48" W x 50" H

Get a Free Quote Call: 630-629-9900

Shanklin Shrink Flow Thru F1SS

  • Manufacturer: Shanklin
  • Model Number: F1SS
  • Frain Number: 5G5510

Shanklin Model F-1, automatic, continuous motion inline flow thru shrink wrapper rated from 0 to 60 linear feet per minute with number of product – depending on materials and application. Stainless steel construction. Package size range: 6" to 48" in Length; 2" to 16" in Width; 1/8" to 6" in Height. Maximum film size: 22" folded. Equipped with side film unwind, folded film roll, hole punch, dual wire side seal, and 18" wide hot knife cut-off, dual 17" long x 13" wide in feed conveyor and 21" long x 10" wide discharge conveyor. Control panel has A/B PLC with touch pad controller and digital readout. Mounted on base frame with leveling legs.

Get a Free Quote Call: 630-629-9900

Shanklin Shrink Auto L Bar A27A

  • Manufacturer: Shanklin
  • Model Number: A27A
  • Frain Number: R30490

Shanklin, Model A27A, automatic, stainless steel, L-bar sealer and shrink tunnel rated from 10 to 25 packages per minute – depending on materials and application. Package size range: 2¾" to 33" in length; to 21" in width; to 8" in Height. Equipped with 36" long x 17½" wide in feed conveyor and 40" long x 19½" wide product thru seal area and discharge conveyor. side mounted film rollers with maximum center fold film of 26" in width and powered film rollers with perf pin wheels. Film former and 28" long x 19" wide L-bar with hot knife seal jaws. Control panel has A/B controller with touch pad controls and read out, A/B vari-speed controller, with start, stop, manual, reset, front and cross seal heat controls, conveyor speed dial, scrap removal controls with e-stops. Mounted on stainless steel frame with flip-up safety guarding and locking casters
Shanklin, Model T-7XL, stainless steel, automatic single zone shrink tunnel with number of product per minute – depending on materials and application Aperture: 8" in Height; 22" in Width. Tunnel: 42" in Length. Equipped with 15" wide x 58" long steel mesh belt, top mounted blower motor and bottom conveyor heater. Control panel has temperature controller with range of 50° F to 500° F, on / off heat switch and conveyor speed control dial. Mounted on (4) leg base frame with casters.

Film Re-wind available at additional cost.

OAD: 84" L x 60" W x 53" H L-Bar Sealer
60" L x 43" W x 70" H Tunnel

Get a Free Quote Call: 630-629-9900

Shanklin Shrink Bundler RW1 Inline, 19"W x 10"H, 15cpm

  • Manufacturer: Shanklin
  • Model Number: RW1
  • Frain Number: 5E1400

Shrink bundler rated from 5 to 20 ppm – depending on materials, application and machine configuration. Package size range: up to 10" in Height; up to 19" W. Equipped with a 15" wide infeed (two belts to create spacing), 20-1/2" W walking beam heated knife cross seal and AB PLC. 36" conveyor height.

OAD: 92" L x 44" W x 72" H

Get a Free Quote Call: 630-629-9900

Shanklin Shrink Bundler B2BB

  • Manufacturer: Shanklin
  • Model Number: B2BB
  • Frain Number: R28960

Shanklin, automatic inline, shrink bundling and tunnel system. Rated from 2 to 20 bundles per minute – depending materials, application and operator dexterity.

Bundler: Shanklin Model B2BB: Package size range: up to 30" in Width; 14" in Height. Equipped with 20" wide x 34" long Neoprene infeed conveyor, 32" wide upper and lower powered film rollers, 32" wide seal jaws with 14" of vertical travel and 23" wide x 48" long Neoprene discharge conveyor. Control panel with AB controller with touch pad display, auto / manual switch, two hand push button manual cycle and digital heat control. Mounted on heavy duty base frame.

Tunnel: Shanklin Model T8PR, automatic, shrink tunnel. Equipped with 28" Wide x 20" High aperture x 47" Long single zone shrink chamber, 120" long x 25" wide live roller product conveyor and cooling fan on discharge end. Control panel with push button start/stop for conveyor, tunnel on / off switch, temperature controller and conveyor speed control dial. Mounted on (4) leg base frame with an in feed and discharge of 33".

OAD: 75"L x 55"W x 80"H (bundler)
OAD: 120"L x 50"W x 80"H (tunnel)

Get a Free Quote Call: 630-629-9900

Shanklin Shrink Flow Thru HS1

  • Manufacturer: Shanklin
  • Model Number: HS1
  • Frain Number: 5E8480

Shanklin HS1 automatic, flow thru shrink wrapper. Package size range: 6" to 60" in Length; 1/2" to 16" in Width; 1/8 to 6" in Height. Equipped 7′ lugged infeed, film scrap rewind reel and A/B PLC. Estimated speeds up to 120 linear feet per minute – depending on materials, application and machine configuration.

OPTION: Film centerfolder

OAD: 204" L x 52" W x 51"H

Get a Free Quote Call: 630-629-9900

Shanklin Shrink Flow Thru F1

  • Manufacturer: Shanklin
  • Model Number: F1
  • Frain Number: 5G8430

Shanklin, Model F1, automatic, continuous motion, flow thru shrink wrapper. Rated from 5 to 40 packages or 5 to 60 linear feet per minute – depending on materials, application and machine configuration. Package size range: 6" to 48" in Length; 2" to 16" in Width; (1/8)" to 6" in Height. Equipped with product accumulating and pacing in feed conveyors, side film unwind, adjustable former, (4) perf wheels, 9" long side seal, 19" wide hot knife seal jaw, and dual belt discharge. Control panel has an A/B PLC, with digital readout, seal jaw heat controller, heat on / off switch, push button start / stop and e-stop controls. Film specifications: up to 26" in width of folded; up to 50" in width of flat (requires optional center folder). Mounted on heavy duty base frame.

OAD: 131"L x 50"W x 50"H

Get a Free Quote Call: 630-629-9900

Shanklin Shrink Flow Thru CF1

  • Manufacturer: Shanklin
  • Model Number: CF1
  • Frain Number: 5G0440

Shanklin Model Cf-1, automatic, side seal, shrink wrapper rated from 5 to 30 packages per minute – depending on materials, application and machine configuration. Package size range: 3" to 120" in Length; 2" to 20" in Width; 1/16" to 5" in Height. Equipped with 34" long x 16-1/2" wide in feed and 40" long x 19-1/2" wide discharge conveyors, center folded film up to 26" wide with perf pin wheels, retracting in feed conveyor to close transverse seal bar gap, 24" wide seal jaw with side sealer. Control panel has A/B controller with touch pad controls and read out, top cross seal temperature controller with temperature gauge, side seal constant and running and in feed / discharge conveyor speed dials, with start, stop, e-stop buttons and mounted is on base frame with casters.

OAD: 84" L x 72" W x 58" H

Get a Free Quote Call: 630-629-9900