Waukesha Machines


Waukesha Machines In Stock

Waukesha Pump Positive 130

  • Manufacturer: Waukesha
  • Model Number: 130
  • Frain Number: R22041

Waukesha, Model 130, positive displacement pump with 316 stainless steel contact parts. Rated from 1 to 150 gallons of product per minute – depending on materials, application and machine configuration. 200 psi maximum working pressure, temperature range of -40 Deg F to 200 deg f standard and up to 300 deg F with hot clearence rotors / stators and viton seals and capable operating both clockwise, or counter clockwise. Equipped with ___" OD / ___" ID seated bevel style product charge / discharge with ___" ground clearance. Powered by a ___ Hp drive with a variable speed gearbox for a current rate of ___ – ___ gal/min. Mounted on a ___" long x ___" wide stainless steel push cart.

OAD: 56" L x 20" W x 54" H

Get a Free Quote Call: 630-629-9900

Waukesha Tank SS Single Wall 50O GAL

  • Manufacturer: Waukesha
  • Model Number: 50O GAL
  • Frain Number: 5D7467

Waukesha, 600 gallon 304 S/S, supply tank, and pump system. Tank has 56" dia x 60" straight wall, flat top with cover, dish bottom with 2 1/2" ID triclover center bottom discharge and 14" clearance. 4 leg unit mounted on a (48"L x 48"W) platform. Pump system consists of (3) Waukesha pumps (2) model 30, 30 gpm and (1) model 15, 15 gpm pumps all 316 S/S contact parts. Model 30’s have 3/4 HP Baldor motor, 2" OD triclover inlet/outlets, and twin wing rotors, and O-Ring seals. Model15 has 1/2 HP Baldor motor, 1" OD triclover inlet/outets, twin wing rotors, and O-Ring seals. Pumps mounted on a S/S frame below tank. System would be ideally suited as supply tank to a time/pressure filler. Last used for metering product to MRM Versa filler.

OAD: 92"(L) x 48"(W) x 146"(H)

Get a Free Quote Call: 630-629-9900

Waukesha Tank SS Single Wall 500 GAL

  • Manufacturer: Waukesha
  • Model Number: 500 GAL
  • Frain Number: 5D7462

Waukesha, Supply tank and pump system consisting of a 500 gallon S/S tank and (3) Waukesha pumps (2) model 30 pumps and (1) model 15 pump). Tank is 43" ID x 46" straight wall, 1/2 HP Lightnin mixer (54"L x 1" dia) shaft and 3" dia. impeller. 2 1/2" ID triclover center bottom discharge with 14" floor clearance. mounted on a (48"L x 48"W x 50"H) platform on casters for mobility. Model 30 pumps are 316 S/S positive displacement pumps capable of up to 30 GPM. Equipped with 3/4 HP Baldor motor, 2" OD triclover inlet/outlets, and twin wing rotors, and O-Ring seals. Model 015 pump is 316 S/S positive displacement pump capable of up to 15 GPM. Equipped with 1/2 HP Baldor motor, 1" OD triclover inlet/outets, twin wing rotors, and O-Ring seals. Pumps mounted on a S/S frame. System ideally suited as supply tank to a time/pressure filler.

OAD: 92"(L) x 48"(W) x 92"(H)

Get a Free Quote Call: 630-629-9900

Waukesha Pump Positive PF3KMA

  • Manufacturer: Waukesha
  • Model Number: PF3KMA
  • Frain Number: 5E4944

Pro/fill controller with (2) Waukesha model 006 sanitary pumps, with 2" OD tri-clover inlet / outlet rated up to 6 gpm each, depending on product and viscosity being pumped. Has (2) Pro-fill 3000 controllers with a Autodex counter, and mounted on a S/S cart with casters, made to run in conjunction with in-line filler.

OAD: 42" L x 42" W x 74" H

Get a Free Quote Call: 630-629-9900