Product
Torit Model 70, Cabinet style, self contained bag house dust collector rated from 175 to 550 scfm – depending on materials and application. Holds (24) cartridge filters, total filter media area: 120 ft², 1 Hp blower motor, manual shaker pedal and 84" flex arm with 4" ID / 10" OD inlet and 7" x 3" blower outlet.
OAD: 56" L x 26" W x 70" H
Torit Model 70, Cabinet style, self contained bag house dust collector rated from 175 to 550 scfm – depending on materials and application. Holds (24) cartridge filters, total filter media area: 120 ft², 1 Hp blower motor, manual shaker pedal and 84" flex arm with 4" ID / 10" OD inlet and 7" x 3" blower outlet.
OAD: 56" L x 26" W x 70" H
Torit Model 70, Cabinet style, self contained bag house dust collector rated from 175 to 550 scfm – depending on materials and application. Holds (24) cartridge filters, total filter media area: 120 ft², 1 Hp blower motor, manual shaker pedal and 84" flex arm with 4" ID / 10" OD inlet and 7" x 3" blower outlet.
OAD: 56" L x 26" W x 70" H
Label Aire, Model 3114TS-1500 7"x16" RH 1-10"ST pressure sensitive, tamp spot labeler. Rated from 600 to 1,500 linear inches per minute, with number of product – depending on materials and application. Equipped with swivel mounted bracket and blow tamp label head with label size range: ¾" to 5" in Length; ¾" to 7" in Width, with accuracies of +/- 1/32", and has 1" to 10" adjustable stroke with maximum 16" OD label roll with 3" ID cores and has stepper drive. Control with touch screen HMI. Mounted on hand crank height adjustable T-stand with casters.
OAD: 48"L x 35"W x 68"H
Clybourn, Automatic, continuous motion, vertical, hot melt glue cartoner with number of cartons per minute – depending on materials and application. Equipped with 94" long (2) chain powered blank carton magazine, (4) head rotary pic in place, with 2-3/4" long x 3-3/4" wide x 3/4" deep fixed product buckets set on 5" centers, 14 pocket, rotary product funnel filling system, Nordson ProBlue hot melt glue unit with pattern controller, major and minor flap closers. Control panel has Micrologix controller with on board control panel and vacuum pick, vacuum pump, main, auto, run, jog and glue switches with start, stop and e-stop push buttons. Mounted on heavy duty frame with interlock safety guarding and statis light bar.
OAD: 288" L x 72" W x 80" H Cartoner
94" L Carton Magazine
Lee, Model 15-20LD12T, 20 liter (5.28 gallon) 316 stainless steel jacketed kettle. Vessel Dimensions: 16¾" ID x 15" deep. Equipped with a tilt out bridge mounted triple motion agitator. Scrape and crossbar powered by a 3 Hp drive, high shear agitator powered by a 5 hp drive, flush mounted sensor and 2" OD / 1½"ID tri-clamp style discharge with penumatic ball valve. Kettle discharges into cart mounted Waukesha model 15 positive displacement pump powered by a 2 hp drive with a 5.79:1 gear ratio for a maximum pumping capacity of 4.32 GPM. Cart mounted system also includes a 1 HP vacuum pump.
Top Fittings:
(1) 3" Sight Glass
(4) 1½" Tri-Clamp
Jacket Fittings: ¾" NPT
MAWP: 90 PSI @ 332° F (jacket)
MDMT: -20°F @ 90 PSI (jacket)
MAWP: 15/FV PSI @ 250° F (vessel)
MDMT: -20°F @ 15/FV PSI (vessel)
OAD: 90"L x 55"W x 105"H
Miura, model LX-50SG-12, gas fired steam boiler. Rated up to 1,970,000 BTUH.
Horsepower: 50 BHP
Steam Output: 1,730 LB/HR
Maximum Pressure: 170 PSI
Operating Pressure Range: 70-150 PSI
Design Temp: 400°F
Fuel Type: Natural Gas
Gas Supply Pressure: 3-5 PSI
OAD: 97"L x 34"W x 102"H
Lee, Model 4000U75, 1056 gallon capacity, 316 stainless steel jacketed and insulated process tank. Vessel dimensions: 66" diameter x 94½" deep with cone bottom. Equipped with an 18" manway, 7½ Hp top mounted scrape agitator, mixing baffle, and 6½" OD / 6" ID Tri-clamp style bottom discharge with 25" ground clearance.
Top Ports:
(1) 6½"OD / 6"ID Tri-Clamp
(3) 4½"OD / 4"ID Tri-Clamp
(2) 3½"OD / 3"ID Tri-Clamp
(2) 2½"OD / 2"ID Tri-Clamp
Jacket Ports:
(6) 2" NPT
MAWP: 100 PSI @ 338°F (Jacket)
MDMT: -20°F @ 100 PSI (Jacket)
Nat’l Brd: 14385
OAD: 75"L x 72"W x 158"H
Lee, Model 4000U75, 1056 gallon capacity, 316 stainless steel jacketed and insulated process tank. Vessel dimensions: 66" diameter x 94½" deep with cone bottom. Equipped with an 18" manway, 7½ Hp top mounted scrape agitator, mixing baffle, and 6½" OD / 6" ID Tri-clamp style bottom discharge with 25" ground clearance.
Top Ports:
(1) 6½"OD / 6"ID Tri-Clamp
(3) 4½"OD / 4"ID Tri-Clamp
(2) 3½"OD / 3"ID Tri-Clamp
(2) 2½"OD / 2"ID Tri-Clamp
Jacket Ports:
(6) 2" NPT
MAWP: 100 PSI @ 338°F (Jacket)
MDMT: -20°F @ 100 PSI (Jacket)
Nat’l Brd: 14384
OAD: 75"L x 72"W x 158"H
Ross, Model RB42B-5, 7 ft³ total (5 ft³ workable), double ribbon mixer with amount of product per hour – depending on materials and application. 304 stainless steel contact parts. Inner mixing chamber dimensions of: 38" in Length; 17" in Width; 21" in Depth, with flip up clamp down cover, 2½" OD mixing shaft with 1" wide x 3/16" thick (outer) and 1¾" wide x 3/16" thick (inner) stainless steel ribbons powered by ½ Hp drive. 3" OD center bottom discharge has slide gate valve with 36" ground clearance.
OAD: 65"L x 30"W x 66"H
Patterson Kelly, 2 ft³, 316 stainless steel, twin shell mixer. Rated to 62 lbs per ft³ with Ibs of product per hour – depending on materials and application. Equipped with (2) 12" ID product ports with bolt down covers, (2) 23" long side V-Walls and (2) 7" long inner V-Walls, shell powered by a 2 Hp drive, liquid solids bar capable powered by a 2 hp drive and has 6"ID butterly valve discharge with 35" ground clearance. Requires 114" ceiling clearance with 28" swing radius / 56" swing diameter. Has touch pad HMI.
OAD: 78"L x 57"W x 72"H
Gemco, Model Slant, 3.37 FT³ Total, (2 FT³ working capacity) 316 stainless steel double cone batch mixer with amount of product per hour – depending on materials and application. Vessel dimensions: 23" diameter, 8" straight wall, 6" deep top cone and 7" deep bottom cone. Equipped with 11" ID product port and bolt down cover and has 6" diameter butterfly valve discharge with 43" ground clearance. Shell powered by a 1 HP drive and agitation bar powered by a 2 HP drive. Mixer requires 74" ceiling clearance with 16" swing radius and 32" swing diameter. Control panel with push button start / stop controls and digital timers.
OAD: 76"L x 53"W x 74"H