General Packaging Machines


General Packaging Machines In Stock

General Packaging Form & Fill Volumetric 48WVP

General, Model 48WVP, automatic, continous motion, vertical, form, fill, and seal machine with number of pouches per minute – depending on materials and application. Bag size range: up to 14" in Width and 5" to 24" in length with proper change parts. Equipped with 20" diameter x 18" deep conical stainless steel product hopper with 5" straight wall, 4 cup volumetric filler with 5½" diameter x 6½" deep pockets on 3" centers, 16" wide horizontal impulse seal jaw with hot wire cut off 20" long resistance vertical back heat seal bar, with side belt film assist and Elkay R2-10 jaw chiller, film registration and 22" wide x 18" long discharge chute. Control panel has A/B PLC, with A/B Panel View, with impulse seal, resistance seal, chiller bar and speed controls.

Markem Hotstamp Coders available for an additional charge.

OAD: 81"L x 57"W x 160"H

Get a Free Quote Call: 630-629-9900

General Packaging Form & Fill Auger 70AC

General model 70AC, automatic, intermittent motion, vertical, form, fill, and seal machine rated from 10 to 60 pouches per minute – depending on materials and application. Bag size range: 1.25" to 8" in Width; 2.5" to 10" in length with proper change parts. Equipped with single head All Fill auger filler, 1.5ft³ stainless steel product hopper with gas flush, 18" long x 2.5" wide fill tube, 12" long lap seal bar, 9" wide hot serrated knife seal jaw , film registration, and 11" wide x 15" long product discharge chute with collation. Additionally features interlocking Lexan guarding, AB PLC, speed controls, and front/back heat bar controls. Last running in a coffee application.

OAD: 48"L x 82"W x 121"H

Get a Free Quote Call: 630-629-9900

General Packaging Form & Fill Auger 90WAC

General model 90WAC, automatic, intermittent vertical, form, fill, and seal machine rated from 10 to 60 pouches per minute – depending on materials and application. Bag size range: 4" to 13" in Width; 4" to 16" in length with proper change parts. Equipped with single head auger filler, 1.5ft³ stainless steel product hopper with gas flush, 24" long x 3.5" wide fill tube, 16" long lap seal bar, 15" wide hot serrated knife seal jaw , film registration, and a 15" wide x 15" long product discharge chute. Additionally features interlocking Lexan guarding, AB PLC, AB Panel View, speed controls, and front/back heat bar controls. Last running in a coffee application.

Coder available at additional cost.

OAD: 68"L x 68"W x 143"H

Get a Free Quote Call: 630-629-9900

General Packaging Form & Fill Auger 70WVR2C

General Model 70WVR2C, automatic, twin tube, intermittent motion, form, fill and seal machine rated from 20 to 60 cycles per minute each side – depending on materials and application. Package size range: 2.5" to 10" in Length; 1.25" to 8" in Width, with proper change parts. Equipped with dual mateer auger fillers with 3 ft³ stainless steel bulk product hoppers, level sensors, gas purge, two 2" forming tubes, 9" wide hot serrated knife, 9" long seal bars and chute with 12" discharge height. Additionally features film registration, Mateer product counters, individual seal bar heat controls, and registration adjustment controls. Last running in a coffee operation.

OAD: 64" L x 61"W x 125" H

Get a Free Quote Call: 630-629-9900