Prodo Pak Machines

Prodo Pak Form & Fill Liquid/Paste

• Manufacturer: Prodo Pak
• Model Number:
• Frain Number: 5H6100

Prodo Pak, Model, 8-up, (4) sided, stainless steel, vertical, form, fill, seal machine, rated from 10 to 40 cycles per minute with number of pouches – depending on materials, application and product being run. Fill range: from onces to gallons and package size up to 16" in Width x 9-1/2" in Length and capable of running liquids, semi-liquids, powders, portion packs of condiments and granulated products free / non-free flowing with proper change parts. Equipped with (8) 6-1/2" long x 2" diameter pistons, 16-1/2" serrated hot knife horizontal seal jaw and 10" vertical side seal jaws with slitters and 16" wide x 11" long product discharge chute. Film Specs: Side mounted, 2" OD x 34" long film rolls with 14" Maximum OD film width on 2" OD core and has film registration eye. Control panel has (5) vertical, (1) horizontal heat seal controllers with main machine, jaw, heat, eye, knife strip, pump and tear notch on / off switches, with start and e-stop push buttons. Mounted on heavy duty frame.

OAD: 90" L x 60" W x 80" H

Prodo Pak Form & Fill Liquid/Paste 1000HFF2 Form Fill Seal Intermittent Motion

• Manufacturer: Prodo Pak
• Model Number: 1000HFF2
• Frain Number: 5C0161

Form, Fill & Seal dual web, four sided seal bag up to 22-1/2" wide x 18" long. Currently set for supported film. Equipped with two 8" diameter (192 oz) pistons with manifold for single or multiple pouch filling. Includes s/s non agitated hopper, electric eye registration, bag deflator, PLC and s/s platform. Has 20" maximum roll diameter with 3" core. Last filling 5 to 20 pound pasta sauce in an institutional size bag.

Prodo Pak Form & Fill Liquid/Paste H110D

• Manufacturer: Prodo Pak
• Model Number: H110D
• Frain Number: 5G8822

Prodo Pak, Model H110D, Duplex, automatic, horizontal form, fill and seal machine.Rated from 10 to 60 pouches per minute – depending on materials, appliaction and machine configuration. Pouch size range: 1¼” to 4½" in Length x 1¼" to 5" in Height, with fill volumes from 1½cc to 20cc and is capable of running most heat sealable films – all above with proper change parts. Equipped with stainless steel product hopper, (1) 6" L x 1" ID liquid filling piston, 11" long side film rollers with 10" maximum web width and __" maximum OD on __" ID core, film registration, 5¼" long bottom horizontal seal jaw, 5½" long vertical seal jaw, 6" long top horizontal seal jaw, tear notcher and knife cut off. Control panel has push button on / off, digital temperture controls and on / off switches for heating, photocell, discharge and notcher. Mounted on (4) leg height adjustable base frame.

OAD: 86" L x 32" W x 85" H

Prodo Pak Form & Fill Liquid/Paste 601-CSW-E

• Manufacturer: Prodo Pak
• Model Number: 601-CSW-E
• Frain Number: 5E5690

Four sided, Form Fill and Seal machine. Speeds dependant on materials and application. Package size: up to 12" in Width; up to 12" in Length. Equipped with independent film stand assembly, web splitter for front to back film registration, associated web tension and tracking rollers, four 2 ounce pistons for 1/2 – 2 oz fill range, 5/8" diameter nozzles, 12" long vertical seal jaws, 12" wide horizontal seal jaws and E-stop. Film Specs: 43" Maximum web width, Film Roll 20" Maximum OD with 3" ID core.

OAD: 64" L x 96" W x 130" H