Lee, model 10CHD9MT, 10 gallon, 316 stainless steel, open top, variable speed, double motion, jacketed kettle. Vessel dimensions: 17" diameter x 14½" deep with a 48½" infeed height. Equipped with hydraulic tilt up bridge mounted double motion scrape and counter rotation agitation (powered by 1½ Hp drive), 1½" Tri-clamp discharge with a butterfly valve at 26" ground clearance and vessel tilt out with a 30" discharge height. AB PLC with touchscreen HMI, and chart recorder. Mounted on stainless steel tubular frame on castors.
Jacket Fittings:
(2) 1" NPT
(1) 1" NPT drain
National Board: 4885
MAWP: 90 PSI @ 332°F
MDMT: -20°F @ 90 PSI
OAD: 83" L x 52" W x 68" H
Silverson, Multimill (multishear mill), 316 stainless steel, inline, high shear mixer. Rates dependant on materials, application and machine configuration. 4 zone stator dimensions: 1st zone has 5" ID, 2nd zone has 7" ID, 3rd zone has 9" ID, 4th zone has 11" ID. Equipped with 3" ID / 7¼" OD flange infeed, 3" ID / 7¼" OD flange discharge, powered by a 100 hp drive. Mounted on a painted base.
OAD: 72" L x 48" W x 35" H
Patterson Kelley, Model 50 ft³, 304 stainless steel, twin shell mixer. Rated up to 55 lb/ft³. Equipped with (2) 17½" bolt down manways each with a 2½" Tri-clamp, (2) 62" long side V-walls and (2) 24" long inner V-walls with (2) 42" diameter chambers, 12" butterfly valve discharge with 53" ground clearance, shell rotation powered by a 5 hp drive. Requires 180" ceiling clearance with 63" swing radius / 126" swing diameter and 116" high swing axis. Mounted on painted base.
OAD: 157" L x 50" W x 152" H
J.C. Pardo & Sons, 30 gallon working capacity (40 gallon capacity total), 304 stainless steel, variable speed, triple motion, jacketed kettle. Vessel dimensions: 24" diameter x 24" deep with a 61" infeed height. Equipped with hydraulic tilt up bridge mounted triple motion scrape, paddle, and high shear agitators, scrape and paddle agitators powered by 7½ hp drive, high shear powered by 3 hp direct drive, lift up cover attached to tilt up bridge, hydraulic tilt up powered by 1 hp drive, 1½" Tri-clamp discharge with 17" ground clearance. Mounted on movable base with castors.
Side Ports:
(1) ½" Tri-clamp
Jacket Fittings:
(4) 1" NPT
Nat’l Brd: 580
MAWP: 45 PSI @ 293°F
OAD: 68" L x 42" W x 101" H
Cornell, Model D-8, 316 stainless steel, variable speed, versator. Rated from ¼ to 2 gallons per minute and disc rotation from 2000 to 6000 rpm – depending on materials and application. Equipped with 8" OD disc and has ¾" ID Tri-Clamp product in / outlet, top vacuum port, and bottom drain, clear glass quick release cover. Product flows through a film-forming ring out and over the surface of the rotating disc at which time the dispersion / deaeration action occurs. Control panel has mixer and vacuum controls with e-stop. Mounted on painted cart.
OAD: 50"L x 31" W x 41" H
Ross, model HSM-410, 304 stainless steel, inline, high shear mixer. Rated up to 240 GPM. Rates dependant on materials, application and machine configuration. Equipped with 2" Tri-clamp infeed, 2" Tri-clamp discharge and powered by a 10 hp drive.
OAD: 38" L x 17" W x 32" H
A&B Process systems, model 100 Gallon, 316 stainless steel, double motion, jacketed processor tank. Vessle Dimensions: 30" ID x 40" deep with a 64½" infeed height. Equipped with bridge mounted double motion scrape and paddle agitator, scrapers powered by a 1 HP drive and paddles powered by a 1 HP drive, lift up manway, 1" tri-clamp style discharge with butterfly valve and 18½" ground clearance. Control panel with AB PLC and touchscreen HMI.
Top Fittings:
(1) 1½" Tri-Clamp
Jacket Fittings:
(2) 1¾"ID 5"OD flange
Nat’l Brd: 10444
MAWP 150 PSI @ 366°F (jacket)
MDMT: -20°F @ 150 PSI (jacket)
OAD: 69" L x 32" W x 89" H
Patterson Kelley, model 1 ft³, 316 stainless steel, jacketed, vacuum, twin shell mixer/dryer. Rated up to 100 lb/ft³. Equipped with (2) 11" boltdown manways, (1) manway lid with vacuum gauge , (2) 17" long side V-walls, (2) 8" long inner V-walls, (2) 11" diameter mixing chambers, 6" butterfly valve discharge with 34" ground clearance, liquid/solids bar powered by a 5 hp drive, shell rotation powered by a ¾ hp drive. Requires 72" ceiling clearance with a 19" swing radius / 38" swing diameter and 51½" high swing axis.
Jacket ports:
(1) ¾" NPT
(2) 1" NP
Nat’l Brd: 63247
MAWP(vessel): Full Vac PSI @ 250°F
MDMT (vessel): 20°F @ F / V
MAWP (Jacket): 30 PSI @ 250°F
MDMT (Jacket): 20°F @ 30 PSI
OAD: 78" L x 45" W x 70" H
MGS, model Topserter ll, 304 stainless steel, high speed, 2 head rotary, pick and place coupon feeder rated up to 120 cycles per minute in random mode – depending on materials and application. Product size range: 1.12" to 2" in Width; 1.12" to 2" in Height and 0.06" to 1" thick with 2 heads. Equipped with 98" long x 1½" wide x 1" high single coupon magazine, 2-head rotary vacuum suction cup pick n place, Nordson H/M, vacuum pump, siko guages and is hand crank adjustable. Control panel with on/off and e-stop push button controls. Mounted on "H" style base frame with safety guarding, casters and leveling legs.
OAD: 129" L x 45" W x 76" H
Quadro Model 194S, 316 stainless steel particle size reduction Comil. Equipped with 5¾" diameter feed throat, 8" diameter screen and 5¾" diameter discharge port with 38¾" ground clearance, variable speed. Rated up to 4,000 lbs of product per hour – depending on materials, machine configuration and application.
OAD: 38"L x 40"W x 65"H
Greerco, model 6TSPLM, 316 stainless steel, inline, high shear mixer. Rated up to 275 GPM. Equipped with 3" Tri-clamp infeed with an intake height of 11¼", 6" daimeter rotor/stator, 3" Tri-clamp discharge, powered by a 40 hp drive.
OAD: 62" L x 26" W x 32" H
Ross, model ME-40, 316 stainless steel, inline, high shear mixer. Equipped with 2½" ID stator, 1½" Tri-clamp infeed, 1" ID / 2" OD Tri-clamp discharge and powered by a 1½ hp drive. Rates dependant on materials, application and machine configuration.
OAD: 30" L x 14" W x 19" H
