Baker Perkins, jacketed, carbon steel, double arm, sigma style blade mixer with pounds of product per hour – depending on materials and application. Working capacity of 100 gallons (13.3 ft³). Equipped with 34" long x 38" wide x 30" deep, Internal dimensions tilt style mixing chamber, and has top cover with 15" long x 22" wide product port. 34" long x 5" wide double sigma style mixing blades, single end drive 40 Hp motor to chain and sproket drive and 5 hp hydraulic package. Mounted heavy duty base frame.
OAD: 90"L x 78"W x 74"H
Roberts Packaging Model C1000, 3-up, automatic, horizontal, continuous motion, form, fill and seal machine capable of speeds from 50 to 200 pouches per minute – depending on materials and application Pouch size range of: 4" to 7-3/4" in Width x 6" to 12" in Height x up to 4-1/2" in Width gusset bottoms, Equipped with (3) Mateer Burt Model auger fillers, rotary fill turret with (14) 9-1/2" Long x 6" Wide x 15" Deep tapered product funnels and (42) pouch clamp grippers. Servo driven, product catch trough below auger feeder, and rotary vertical sealing jaws, PLC controller with LED display, interlock barrier guarding and E-stops. Mounted on heavy duty frame. Last running in a food service operation.
Zipper attachment can be added for additional cost.
OAD: 37′ L x 8′ W x 9′ 5" H
Multipond Model MP1401FFC, combination weigh scale system with pounds of product per hour – depending on materials and application. Equipped with stainless steel center cone and ring assembly and has (14) 11" Long x 6" Wide x 1-1/2" Deep stainless steel feed trays with (14) 4-3/4" Long x 4" Wide x 6-1/2" Deep, plastic pre-feed and weigh buckets, stainless steel discharge chute and 1000 series trough / base with calibration weights of 200 grams and weigh range of 1000 grams. Has 1 litre total and .7 litre usable bucket capacity and can do IQF products and the plastic buckets are wash down.
OAD: 45" L x 40" W x 54" H
Doboy Model GS1000S, high speed, mount over conveyor, double fold, hot melt, bag sealer rated from 0 to 100 feet per minute, with number of bags – depending on materials and application. Bag size range: 3 lbs to 20 lbs, Bag Width: 3.5" to 15". Equipped with top bag carrier chain, outer glue seal station with hot melt glue applicator, (2) 3/4" folds and 42" compression section, rotary trimmer, hand crank height adjustable variable speed controls and Lexan guarding. Mounted on a height adjustable frame.
OAD: 183"L x 56"W x 86"H
Delkor Model 751, Automatic, single head, tray former, rated up to 75 trays per minute – depending on materials and application. Tray size range: 12" to 36" in Length; 6" to 26" in Width; 1/2" to 5" in Height Equipped with 50" long powered blank tray magazine, (4) suction cup vacuum recipicating pick-in-place, single mechanical tray forming head, Nordson (2) gun hot melt glue system and hooded seal area, with lexan lift-up access door, control panel, with forward, reverse, cycle stop and E stop push buttons and manual and auto, pick on/off and control panel with A/B switches. Mounted on base frame with casters.
OAD: 125"L x 80"W x 88"H
Flex Link, 90° 4" wide x 132" long stainless steel conveyor. Equipped 82" long infeed to 90° turn to a 50" long discharge with a 32" infeed / discharge height. Powered by a ? hp drive mounted on stainless steel frame.
OAD: 90"L x 64"W x 38"H
Sprout Waldron, model B-115, 150 ft³, (115 ft³ working capacity), double ribbon mixer with pounds of product per hour – depending on materials and application. 304 stainless steel construction. Inner mixing chamber dimensions of 143" in Length; 42" in Width; 48" in Depth. Equipped with top bolt down covers, 2" wide x ½" thick (outer) and 4" wide x ½" thick (inner) stainless steel ribbons. (1) 8"ID / 21"OD flanged discharge and (1) 9"ID / 19"OD flanged discharge. Ribbons powered by a 30 HP drive.
Top Access: (1) 16"W x 48"L lift off cover
(1) 8" ID flange
(1) 6" Dia Open Vent
OAD: 177"L x 64"W x 95"H
Armstrong International, model AFD3000 Flo-Direct, direct gas-fired natural gas water heater. Rated up to 3,000,000 BTUH.
Gas Supply Pressure: 2 – 6 psig / 0.14 – 0.41 barg
Dynamic Water Supply Pressure: Constant water pressure (+/-5 psi variation maximum) within a minimum of 30 psig/2 barg and a maximum of 100 psig/6.8 barg range is required for optimum performance.
Maximum Inlet Water Temperature: 100°F (38°C)
Minimum Inlet Water Temperature: 32°F (0°C)
Maximum Effective Outlet Temperature: 185°F (85°C)
Equipped with 2 hp Goulds 2ST1G9F4 centrifugal transfer pump. Control panel with AB controls and touch screen HMI.
OAD: 78"L x 60"W x 119"H
Lantech, Model SLC, automatic, overhead rotary stretch wrapper. Wrap diameter: 80". Load Size: 52" in Length; 48" in Width; 12" to 80" in Height. Equipped with EZ thread roll carriage, stretch plus wrap head, with 250% pre-stretch standard, scissor cut-off. Control panel has A/B PLC controller with touch screen HMI. Rate dependant on materials application and machine configuration.
OAD: 220"L x 178"W x 142"H
Feldmeier, 550 Gallon capacity, 316 stainless steel, internal pressure / vacuum tank. Vessel dimensions: 50" diameter x 64" straight wall. Equipped with 18" diameter bolt down cover and 2½" Tri-Clamp style discharge with 12" ground clearance. Mounted on (4) stainless steel legs.
Side Ports:
(1) 3" Tri-Clamp
(2) 2" Tri-Clamp
Top Ports:
(1) 4" Tri-Clamp
(1) 3" Tri-Clamp
(1) 1½" Tri-Clamp
(1) ¾" Tri-Clamp
MAWP: 15PSI / FV @ 300°F (Vessel)
MDMT: 0°F @ 15PSI / FV
Nat’l Brd: 2495
OAD: 58"L x 58"W x 105"H
Delkor, Model 742, automatic, dual head, tray former, rated from 60 to 150 trays per minute – depending on materials, application and machine configuration. Blank Tray size: up to 22" in Length; up to 30" in Width. Equipped with (2) 24" long blank tray magazines, dual (3) suction cup reciprocating pick and place, shuttle indexing system, ram plunger, tray forming station, Lexan safety guarding. Control panel has sart, stop and e-stop push button controls Mounted on (4) leg base frame.
OAD: 105" L x 57" W x 78" H
Flexicon, Model BFC-C, Bulk bag, super sack unloading system. Equipped with 109" long cantilevered I-beam extending 45" beyond frame, spider lift bag attachment rated to 3200 lbs., powered hoist and trolley, bag massagers, and 12" iris valve to secure sac chute and 3 ft³ hopper with 8" flanged outlet and slide gate valve.
OAD: 114" L x 67" W x 217" H
