Techniblend, TB series, beverage blending system. Designed to blend a wide range of water and syrup ratios. Skid mounted system equipped with (1) 400 gallon capacity tank with 40" diameter x 75" straight wall vessel dimensions, (1) 275 gallon tank with 45" diameter x 40" straight wall vessel dimensions, (1) SPX 2065HV centrifugal pump powered by a 15 HP / 3500 rpm drive, (1) SPX C328 centrifugal pump powered by a 7½ HP / 3520 rpm drive and (1) Waukesha 60 positive displacement pump powered by a 5 HP / 1755 rpm drive with a 4.66:1 ratio gearbox.
OAD: 112"L x 84"W x 135"H
Avins Fabrication skid mounted blending system. Equipped with (2) 125 gallon jacketed tanks. Vessel dimensions: 30" diameter x 42" deep with a 38" straight wall; each 125 gallon tank equipped with a 16" manway and 0.30 HP prop agitation. (1) 100 gallon single wall tank. Vessel dimensions: 30" diameter x 36" deep. (2) APV W+35/35 centrifugal pumps and (1) Wilden P200 air diaphragm pump.
OAD: 105"L x 122"W x 112"H
Seco, 89" wide x 276" long, stainless steel offline accumulation table. Equipped with a 24" wide infeed conveyor and 89" wide x 276" long accumulation belt with a 49" infeed height. Powered by (2) ½ HP drives.
OAD: 317"L x 120"W x 56"W
Walker, 1000 gallon capacity, stainless steel process tank with 316L stainless steel contact parts. Vessel dimensions: 70" diameter with 64" straight wall. Equipped with dome top, 20" x 16" side man way, top mounted 1½ Hp prop agitation, CIP spray balls, flush mount sensor and thermowell. Dish bottom has 2" OD / 1½" ID center bottom discharge with 23" ground clearence.
Top Ports:
(1) 4½"OD / 4"ID Tri-Clamp
(2) 3½"OD / 3"ID Tri-Clamp
OAD: 101"L x 80"W x 130"H
Sprinkman, 1,364 gallon, 304 stainless steel, insulated tank. Vessel Dimensions: 60" diameter x 105" straight wall with a dish bottom. Equipped with 17" top manway with bolt down cover, (2) thermowells, 3" diameter overflow and 2" Tri-clamp discharge with 16" ground clearance.
Top Ports:
(1) 6" ID Tri-Clamp
(1) 1½" Tri-Clamp
Side Port:
(1) 1½" Tri-clamp
OAD: 76"L x 68"W x 152"H
Sprinkman, 1,364 gallon, 304 stainless steel, insulated tank. Vessel Dimensions: 60" diameter x 105" straight wall with a dish bottom. Equipped with 17" top manway with bolt down cover, (2) thermowells, 3" diameter overflow and 2" Tri-clamp discharge with 16" ground clearance.
Top Ports:
(1) 6" ID Tri-Clamp
(1) 1½" Tri-Clamp
Side Port:
(1) 1½" Tri-clamp
OAD: 76"L x 68"W x 152"H
Sprinkman, 1,705 gallon, 304 stainless steel, jacketed tank. Vessel Dimensions: 60" diameter x 120" straight wall with a cone bottom. Equipped with a thermowell and bottom cone manway with bolt down cover. 2" Tri-clamp discharge with 14" ground clearance.
Top Port:
(1) 6" ID Tri-Clamp
(2) 2" Tri-Clamp
(1) 1½" Tri-Clamp
Side Port:
(1) 2" Tri-Clamp
(1) 1½" Tri-Clamp
Jacket Port:
(6) 1" NPT
MAWP: 14.9 PSI @ 200°F (Vessel)
MAWP: 43 PSI @ 200°F (Jacket)
OAD: 74"L x 68"W x 205"H
Sprinkman, 1,705 gallon, 304 stainless steel, jacketed tank. Vessel Dimensions: 60" diameter x 120" straight wall with a cone bottom. Equipped with a thermowell and bottom cone manway with bolt down cover. 2" Tri-clamp discharge with 14" ground clearance.
Top Port:
(1) 6" ID Tri-Clamp
(2) 2" Tri-Clamp
(1) 1½" Tri-Clamp
Side Port:
(1) 2" Tri-Clamp
(1) 1½" Tri-Clamp
Jacket Port:
(6) 1" NPT
MAWP: 14.9 PSI @ 200°F (Vessel)
MAWP: 43 PSI @ 200°F (Jacket)
OAD: 74"L x 68"W x 205"H
Sprinkman, 1,705 gallon, 304 stainless steel, jacketed tank. Vessel Dimensions: 60" diameter x 120" straight wall with a cone bottom. Equipped with a thermowell and bottom cone manway with bolt down cover. 2" Tri-clamp discharge with 14" ground clearance.
Top Port:
(1) 6" ID Tri-Clamp
(2) 2" Tri-Clamp
(1) 1½" Tri-Clamp
Side Port:
(1) 2" Tri-Clamp
(1) 1½" Tri-Clamp
Jacket Port:
(6) 1" NPT
MAWP: 14.9 PSI @ 200°F (Vessel)
MAWP: 43 PSI @ 200°F (Jacket)
OAD: 74"L x 68"W x 205"H
Mokon, model Full Range 311708, combination heater and chiller. Temperature range of 35°F to 200°F depending on materials, application and machine configuration. Rated up to 40 GPM at 32 PSI. Equipped with a single zone 9kW heater, 5 HP compressor, ¾ hp chiller supply pump and 1½ HP process pump. Process, supply and drain fittins are 1" FNPT and has a ½" FNPT system drain with ball valve.
OAD: 60"L x 38"W x 48"H
Mokon, model Full Range 311708, combination heater and chiller. Temperature range of 35°F to 200°F depending on materials, application and machine configuration. Rated up to 40 GPM at 32 PSI. Equipped with a single zone 9kW heater, 5 HP compressor, ¾ hp chiller supply pump and 1½ HP process pump. Process, supply and drain fittins are 1" FNPT and has a ½" FNPT system drain with ball valve.
OAD: 60"L x 38"W x 48"H
Mokon, Model Pura-Therm DT2318CE19, 18 Kw, circulating water control system. Rated up to 250°F and 40 gallons per minute at 32 psi. Equipped with digital temperature control, 1" NPT inlet for water supply and 1" NPT connections to and from process.
OAD: 47"L x 17"W x 28"H
