Best Industrial, stainless steel belt conveyor. Equipped with a 22¾" wide x 96" long belt with a 34" infeed / discharge height. Control box with push button start stop and variable speed controller.
OAD: 97"L x 33"W x 37"H
EquipmentProduct
Product
Best Industriual Conveyor Belt 22¾"W X 96"L
Best Industrial, stainless steel belt conveyor. Equipped with a 22¾" wide x 96" long belt with a 34" infeed / discharge height. Control box with push button start stop and variable speed controller.
OAD: 97"L x 33"W x 37"H
Conveyor Table Top 30W X 50L
30"W x 58"L stainless steel, plastic Intralox belt conveyor. Equipped with a variable speed drive, 4"H fixed guard rails, product sensors with 13" x 4" pneumatic lane diverter with 4" high product clearance. Mounted on stainless steel frame with height adjustable legs currently set at 35".
OAD: 62"L x 46"W x 45"H
Combi America Sealer Case Taper TB1
Combi America, Model TB1, Automatic, stainless steel, top case taper. Rated from 5 to 20 cases per minute – depending on materials and application. Case size range: 5" to 20" in Length; 5" to 16" in Width; 5" to 20" in Height. Equipped with minor flap closer, major flap plows, 54" long x 3" wide dual side gripper belts, 2" tape head, hand crank adjustable with interlocking safety guarding. Control panel with conveyor speed controller with start and e-stop push buttons. Mounted on height adjustable legs.
OAD: 62"L x 57"W x 64"H
Tank SS Single Wall 4000GAL
3600 gallon capacity, 304 stainless steel silo. Vessel dimensions: 72" diameter with 220" straight wall. Equipped with 18" OD bolt down man way. Dish bottom has 3½" OD / 3" ID Tri-Clamp discharge with 10" ground clearence.
Top Ports:
(2) 7½"DO / 3½"ID Flange
Side Ports:
(1) 3½"OD / 3"ID Tri-Clamp
(2) 2"OD / 1½"ID Tri-Clamp
OAD: 80"L x 76"W x 244"H
Perma San Stapco Stainless Tank SS Single Wall 1131 GAL
Perma San, 1,131 Gallon CVS, 316 stainless steel, single wall tank with slant bottom. Vessel Dimensions: 64" diameter with a 72" straight wall. Equipped with a dome top, 17½" diameter top clamp down man way, 3"OD / 2½"ID Tri-clamp infeed and 3"OD / 2½"ID Tri-clamp fitting discharge with 20" ground clearance.
Top Access:
(1) 3½"OD / 3"ID Tri-Clamp
(1) 2½"OD / 2"ID Tri-Clamp
OAD: 74"L x 74"W x 110"H
Conveyor Table Top 10" X 56"
Stainless steel conveyor with amount of product per minute and hour – depending on materials and application. Equipped with (2) 10" wide and 56" long, belt conveyor has 39½" infeed / discharge height. Equipped with dual 1 Hp drives with variable speed controller and e-stop. Mounted on (4) legs.
OAD: 60" L x 36" W x 44" H
Conveyor Table Top 10" X 56"
Stainless steel case turning conveyor. Equipped with (2) 10" wide and 56" long, belt conveyor has 39½" infeed / discharge height. Equipped with dual 1 Hp drives with variable speed controller and e-stop. Mounted on (4) legs.
OAD: 60" L x 36" W x 44" H
Doyle Equipment Mfg Company Mixer Powder Paddle S.S. 6TDDR BLENDER
Doyle Equipment, 6 ton direct drive stainless steel blending system. Rated up to 6 ton batch capacity – depending on materials, application and machine configuration. Equipped with (3) 95" wide x 144" long x 60" deep 6 ton split hoppers and (1) 95" wide x 144" long x 60" deep conditioning hopper with a 10 hp bottom auger. All (4) hoppers are mounted on RiceLake load cells and have pneumatic slide gate discharges. Product hoppers feed into a 16" wide x 690" long drag chain conveyor with 16" x 7½" UHMW paddles set on 12" centers. Drag chain conveyor feeds into a 88" diameter x 120" long 6 ton rotary blender powered by a 20 hp direct drive motor. Blended product is discharged into a 16" wide x 403" long drag chain conveyor with 16" x 7½" UHMW paddles set on 12" centers with a 238" discharge height.
OAD: 925"L x 501"W x 303"H
Sprout Waldron / Andrtiz Mixer Powder Ribbon S. S. B-79
Sprout Waldron, model B-79, 94 ft³, (79 ft³ working capacity), double ribbon mixer with pounds of product per hour – depending on materials and application. 304 stainless steel construction. Inner mixing chamber dimensions of 119" in Length; 38" in Width; 40" in Depth. Equipped with lift up cover, 2" wide x ¾" thick (outer) and 4" wide x ½" thick (inner) stainless steel ribbons. 7" diameter flush pneumatic dischage with 38" ground clearance. Ribbons powered by a 15 HP drive.
OAD: 151"L x 50"W x 94"H
Weigh Pack Form & Fill Scale XPDIUS ELITE 130
Weigh Pack, model XPDIUS Bagger Elite I-130, vertical seal bagger. Film roll up to 26" wide on a 3" core with 16" maximum diameter. Capable of making up to a 12" wide x 18" long bag. Equipped with a 20" long vertical seal bar, 13" wide seal jaws with hole punch, film registration and a touch screen HMI.
OAD: 80"L x 52"W x 66"H
Waukesha Pump Positive 45
Waukesha, Model 45, positive displacement pump with 316 stainless steel contact parts. Rated from 1 to 58 gallons of product per minute – depending on materials, application and machine configuration. 450 psi maximum working pressure, temperature range of -40 Deg F to 200 deg f standard and up to 300 deg F with hot clearence rotors / stators and viton seals and capable operating both clockwise, or counter clockwise. Equipped with 2½" OD / 2" ID Tri-Clamp style product charge / discharge with 13½" ground clearance. Powered by 3 Hp motor drive with 5.79:1 gear ratio for a current rate of 29.79 gallons per minute.
OAD: 52"L x 16"W x 23"H