APV Crepaco Machines


APV Crepaco Machines In Stock

APV Crepaco Heat Exch Scrape Surface HD

  • Manufacturer: APV Crepaco
  • Model Number: HD
  • Frain Number: 5G9082

Crepaco, Model HD, stainless steel, continuous, double cylinder, scrape surface heat exchanger. Rated from 100 to 5,000 gallons of product per hour – depending on materials, application and machine configuration. Each cylinder equipped with 70" long x 6" ID product cylinder, (4) plastic scraper blades, 9 ft² of heat transfer area, 2½"OD / 2"ID threaded product connections and 1" NPT media connections Both Cylinders powered by a common 15 hp drive. Mounted on (6) leg heavy duty frame.

MAWP: 150 PSI @ 350°F

OAD: 112" L x 38" W x 46" H

Get a Free Quote Call: 630-629-9900

APV Crepaco Heat Exch Scrape Surface HD

  • Manufacturer: APV Crepaco
  • Model Number: HD
  • Frain Number: 5G9083

Crepaco, Model HD, stainless steel, continuous, double cylinder, scrape surface heat exchanger. Rated from 100 to 5,000 gallons of product per hour – depending on materials, application and machine configuration. Each cylinder equipped with 70" long x 6" ID product cylinder, (4) plastic scraper blades, 9 ft² of heat transfer area, 2½"OD / 2"ID threaded product connections and 1" NPT media connections Both Cylinders powered by a common 15 hp drive. Mounted on (6) leg heavy duty frame.

MAWP: 150 PSI @ 350°F
Nat’l Brd: 2775 / 2776
Tube S/N # 5678

OAD: 112" L x 38" W x 46" H

Get a Free Quote Call: 630-629-9900

APV Crepaco Tank Processors 250 GAL

  • Manufacturer: APV Crepaco
  • Model Number: 250 GAL
  • Frain Number: R26240

APV Crepaco 250 Gal, stainless steel jacketed mix tank. Vessel dimensions: 60"ID x 25" straight wall. Equipped with bridge mounted, single motion, full sweep agitator, two piece flip up covers with lift handles, (3) 2"ID and (2) 3"ID tri-clamp inlet ports, Full jacket rated to MAWP 100psi @ 350°F, MDMT -20°F @ 100psi. (4) 1-1/2"MNPT with jacket inlet / outlets. Dish bottom has 3"ID tri-clamp center bottom discharge with 18" ground clearance has bottom temperature and diaphragm level probes. Mounted on (4) 24" high stainless steel tubular legs.

Nat’l Board No. 9870

OAD: 67"L x 65"W x 86"H

Get a Free Quote Call: 630-629-9900

APV Crepaco Tank Processors 300 GALLON

  • Manufacturer: APV Crepaco
  • Model Number: 300 GALLON
  • Frain Number: 5G2631

APV 300 gallon, 316 stainless steel mixing tank. Vessle dimensions: 66" Diameter with 32" straight wall. Equipped with dome top, (1) 19" manway with cover and interlock, (1) 16" manway with cover and interlock, 11" wide x 15" long feed port with lift off cover, (1) 3-1/2" port, (1) 5" port, dual spray nozzles with (1) 1-1/2" threaded coupling, 2 hp drive with prop aggitation, start/stop controls, 4-1/2" side bottom discharge with ball valve, mounted on stainless steel legs.

OAD: 72" L x 96" W x 72" H

Get a Free Quote Call: 630-629-9900

APV Crepaco Tank SS Single Wall APV 500 GAL

  • Manufacturer: APV Crepaco
  • Model Number: APV 500 GAL
  • Frain Number: 5F9573

APV Crepaco, 500 Gallon, insulated 304 stainless steel mixing tank. Equipped with 68" ID x 43" straight wall. Dome top, has 18" ID manway with flip-up / clamp down cover, bridge mounted paddle sweep style agitation with dual spray ball and stationary baffle, 2" and 3" OD sanitarfy top ports and clamp on air vent with screen. Temperature probe port. Slant bottom with 2" OD threaded side bottom discharge with 6" floor clearance. Mounted on (4) stainless steel legs.

OAD: 80" L x 80" W x 92" H

Get a Free Quote Call: 630-629-9900

APV Crepaco Tank Processors 300 GAL

  • Manufacturer: APV Crepaco
  • Model Number: 300 GAL
  • Frain Number: 5D2905

APV Crepaco, 300 gallon, 316 S/S. jacketed cooking / mixing vessel. Jacket rated for maximum of 60 psi with (3) 1.5", (2) 1" and (2) 3/4" threaded inlets / oulets. Tank rated for internal pressure of 30 psi and full vacuum. Measures 44" in diameter x 42" deep. Top of vessel has (1) 24" lift up bolt down man way. Equipped with bottom mounted side/bottom scrape agitation, counter rotating agitation and a 3 HP high shear homogenizing mixer mounted on wall between scrappers, 1 1/2" side bottom discharge with 32" floor clearance. Mounted on (4) carbon steel legs.

OAD: 66" (L) x 50" (W) x 84" (H)

Get a Free Quote Call: 630-629-9900