Hayes & Stolz Machines
Hayes & Stolz Machines In Stock
Hayes & Stolz Mixer Powder Ribbon S. S. 10 CU FT
- Manufacturer: Hayes & Stolz
- Model Number: 10 CU FT
- Frain Number: 5F8170
Hayes & Stolz, 10 cu ft, 304 stainless steel, double ribbon mixer with amount of product per hour – depending on materials and application, Equipped with 43" Long x 22" Wide x 24" Deep mixing chamber, two piece flip cover with safety grid and two top ports (one 8" OD flanged 6" ID & one 6" OD flanged 3" ID), double ribbons on 3-1/2" diameter shaft. Bottom end (10" OD flanged / 6" ID) discharge port at 19" floor clearence, split type packing seals with air purge with a chain to sproket motor drive.
OAD: 90" L x 45" W x 52" H
Get a Free Quote Call: 630-629-9900
Hayes & Stolz Mixer Powder Paddle S.S. DA6-0609
- Manufacturer: Hayes & Stolz
- Model Number: DA6-0609
- Frain Number: 5H7112
Hayes & Stolz, 32 cubic foot, poly double paddle mixer with pounds of product per hour – depending on materials and application. Chamber dimensions: 71" in Length; 16" in Width; 16" in Depth. Equipped lift up cover, double paddles with dual 4" diameter shafts powered by a 7½ hp drive and bottom end 11" x 9" flanged discharge with 18" floor clearence.
OAD: 115"L x 45"W x 45"H
Get a Free Quote Call: 630-629-9900
Hayes & Stolz Mixer Powder Paddle S.S. DA6-0609
- Manufacturer: Hayes & Stolz
- Model Number: DA6-0609
- Frain Number: 5H7113
Hayes & Stolz, 32 cubic foot, poly double paddle mixer with pounds of product per hour – depending on materials and application. Chamber dimensions: 71" in Length; 16" in Width; 16" in Depth. Equipped lift up cover, double paddles with dual 4" diameter shafts powered by a 7½ hp drive and bottom end 11" x 9" flanged discharge with 18" floor clearence.
OAD: 115"L x 45"W x 45"H
Get a Free Quote Call: 630-629-9900
Hayes & Stolz Mixer Powder Ribbon Carbon HR150502
- Manufacturer: Hayes & Stolz
- Model Number: HR150502
- Frain Number: 5G6990
Hayes & Stolz, Model HR15-0502, 20 ft³ (15 ft³ workable), double ribbon mixer with carbon steel contact parts. Inner mixing chamber dimensions: 50" in Length; 26" in Width; 28" in Depth. Equipped with bolt down cover and 18" x 18" flip up manway with (1) 7½" diameter open vent and (2) 5¾" diameter open vent ports. 2½" diameter motor shaft, 4" diameter mixing shaft with 1" wide x 3/8" thick (outer) and 1½" wide x ¼" thick (inner) carbon steel ribbons. 8½" OD / 6" ID 6-bolt pattern flange end bottom discharge has 10" ground clearance. Powered by 5 Hp motor. Mounted on mild steel base frame.
OAD: 87" L x 31" W x 55" H
Get a Free Quote Call: 630-629-9900