Waukesha Machines
Waukesha Machines In Stock
Waukesha Tank SS Single Wall 50O GAL
- Manufacturer: Waukesha
- Model Number: 50O GAL
- Frain Number: 5D7467
Waukesha, 600 gallon 304 S/S, supply tank, and pump system. Tank has 56" dia x 60" straight wall, flat top with cover, dish bottom with 2½" ID triclover center bottom discharge and 14" clearance. 4 leg unit mounted on a (48"L x 48"W) platform. Pump system consists of (3) Waukesha pumps (2) model 30, 30 gpm and (1) model 15, 15 gpm pumps all 316 S/S contact parts. Model 30’s have ¾ HP Baldor motor, 2" OD triclover inlet/outlets, and twin wing rotors, and O-Ring seals. Model15 has ½ HP Baldor motor, 1" OD triclover inlet/outets, twin wing rotors, and O-Ring seals. Pumps mounted on a S/S frame below tank. System would be ideally suited as supply tank to a time/pressure filler. Last used for metering product to MRM Versa filler.
OAD: 92"(L) x 48"(W) x 146"(H)
Get a Free Quote Call: 630-629-9900
Waukesha Tank SS Single Wall 500 GAL
- Manufacturer: Waukesha
- Model Number: 500 GAL
- Frain Number: 5D7462
Waukesha, Supply tank and pump system consisting of a 500 gallon S/S tank and (3) Waukesha pumps (2) model 30 pumps and (1) model 15 pump). Tank is 43" ID x 46" straight wall, ½ HP Lightnin mixer (54"L x 1" dia) shaft and 3" dia. impeller. 2½" ID triclover center bottom discharge with 14" floor clearance. mounted on a (48"L x 48"W x 50"H) platform on casters for mobility. Model 30 pumps are 316 S/S positive displacement pumps capable of up to 30 GPM. Equipped with 3/4 HP Baldor motor, 2" OD triclover inlet/outlets, and twin wing rotors, and O-Ring seals. Model 015 pump is 316 S/S positive displacement pump capable of up to 15 GPM. Equipped with ½ HP Baldor motor, 1" OD triclover inlet/outets, twin wing rotors, and O-Ring seals. Pumps mounted on a S/S frame. System ideally suited as supply tank to a time/pressure filler.
OAD: 92"(L) x 48"(W) x 92"(H)
Get a Free Quote Call: 630-629-9900
Waukesha Mixer Liquid Triblender WP3218MD
- Manufacturer: Waukesha
- Model Number: WP3218MD
- Frain Number: 5J1650
Waukesha, Model WP3218MD, stainless steel tri-blender with absorption rates from 10 to 120 gallons liquid and 1 to 100 pounds dry product per minute – depending on materials, application and machine configuration. Equipped with 32" diameter x 25" deep hopper with 3" funnel product inlet, 2" OD / 1½" ID liquid feed, 15 Hp mix head and 2½"OD / 2" ID discharge. Control panel has push button start / stop controls. Mounted on stainless steel cart with casters
OAD: 48" L x 32" W x 52" H
Get a Free Quote Call: 630-629-9900
Waukesha Pump Positive SP4
- Manufacturer: Waukesha
- Model Number: SP4
- Frain Number: 5G7347
Waukesha Model SP4, stainless steel, high shear, positive displacement pump and emulsifier Rated from 1 to 30 gallons per minute – depending on materials and application. Equipped with a 2½" OD / 2" ID seated beval top and front inlet / outlets, temperature range from 0 to 300 Deg F and pressure ratings up to 150 psi and can handle product up to 1,000,000 cps depending on product, modular, interchangeable stators and rotors for versatile and compact processing. Mounted on platform style base.
OAD: 49"L x 17"W x 20"H
Get a Free Quote Call: 630-629-9900
Waukesha Feeder Auger 224
- Manufacturer: Waukesha
- Model Number: 224
- Frain Number: 5H8903
Stainless steel, twin screw pump feed system with pounds of product per hour – depending on materials and application. Vessel dimensions: 52" in Length; 30" in Width; 28" in Depth. Product viscosity: up to 1,000,000 CPS. Equipped with stainless steel product hopper, (2) 8" OD x 60" long stainless steel feeding screws powered by a 1 hp drive, Waukesha model 224 positive displacement pump with 4½"OD / 4"ID Tri-clamp discharge with 11" ground clearance.
OAD: 114"L x 44"w x 39"H
Get a Free Quote Call: 630-629-9900
Waukesha Pump Positive 30
- Manufacturer: Waukesha
- Model Number: 30
- Frain Number: R32231
Waukesha, Model 30, positive displacement pump with 316 stainless steel contact parts. Rated from 1 to 36 gallons of product per minute – depending on materials, application and machine configuration. 200 psi maximum working pressure, temperature range of -40 Deg F to 200 deg f standard and up to 300 deg F with hot clearence rotors / stators and viton seals and capable operating both clockwise, or counter clockwise. Equipped with 2" OD / 1½" ID Tri-Clamp style product charge / discharge with 15" ground clearance. Powered by 3 Hp motor drive with 5.18:1 gear ratio for a current rate of 20.32 gallons per minute. Control panel panel has touch pad variable speed control. Mounted on 46" long x 18" wide stainless steel (4) leg frame with casters.
OAD: 50"L x 20"W x 47"H
Get a Free Quote Call: 630-629-9900
Waukesha Pump Positive 30
- Manufacturer: Waukesha
- Model Number: 30
- Frain Number: R32230
Waukesha, Model 30, positive displacement pump with 316 stainless steel contact parts. Rated from 1 to 36 gallons of product per minute – depending on materials, application and machine configuration. 200 psi maximum working pressure, temperature range of -40 Deg F to 200 deg f standard and up to 300 deg F with hot clearence rotors / stators and viton seals and capable operating both clockwise, or counter clockwise. Equipped with 2" OD / 1½" ID Tri-Clamp style product charge / discharge with 15" ground clearance. Powered by 3 Hp motor drive with 4.93:1 gear ratio for a current rate of 21.42 gallons per minute. Control panel panel has touch pad variable speed control. Mounted on 46" long x 18" wide stainless steel (4) leg frame with casters.
OAD: 50"L x 20"W x 47"H
Get a Free Quote Call: 630-629-9900
Waukesha Pump Positive 30
- Manufacturer: Waukesha
- Model Number: 30
- Frain Number: R31370
Waukesha, Model 30, positive displacement pump 316 stainless steel contact parts. Equipped with 2½" OD / 2" ID Tri-clamp style product charge / discharge with 8" ground clearance. Powered by a 1 Hp motor drive with a variable speed controller and has 84.61:1 gear ratio for a maximum current rate of 1.24 gallons per minute. 200 psi maximum working pressure, temperature range of -40 Deg F to 200 Deg F standard and up to 300 Deg F with hot clearence rotors / stators and viton seals and is capable operating both clockwise or counter clockwise. Mounted on a 41" long x 17" wide stainless steel push cart.
OAD: 60"L x 24"W x 44"H
Get a Free Quote Call: 630-629-9900
Waukesha Pump Positive 220
- Manufacturer: Waukesha
- Model Number: 220
- Frain Number: R30430
Waukesha, Model 220, positive displacement pump with 316 stainless steel contact parts. Rated from 10 to 300 gallons of product per minute – depending on materials, application and machine configuration. 200 psi maximum working pressure and capable operating both clockwise, or counter clockwise. Equipped with 5" OD / 4" ID I-Line style product charge / discharge with 12" ground clearance. Powered by a 15 Hp drive with a 9.9:1 gear ratio for a current rate of 90 gal/min. Mounted on a 58" long x 21" wide stainless steel frame base.
OAD: 70"L x 23"W x 43"H
Get a Free Quote Call: 630-629-9900
Waukesha Pump Positive 15
- Manufacturer: Waukesha
- Model Number: 15
- Frain Number: R29338
Waukesha, Model 15, positive displacement pump with 316 stainless steel contact parts. Rated from 1 to 10 gallons of product per minute – depending on materials, application and machine configuration. 200 psi maximum working pressure, temperature range of -40 Deg F to 200 deg f standard and up to 300 deg F with hot clearence rotors / stators and viton seals and capable operating both clockwise, or counter clockwise. Equipped with a 2" OD / 1½" ID Tri-clamp style product charge / discharge with 11" ground clearance. Powered by a 2 Hp drive with a variable speed controller and a 3:1 gear ratio for a maximum current rate of 7.5 gal/min. Mounted on a 45" long x 18" wide stainless steel push cart.
OAD: 45"L x 18"W x 44"H
Get a Free Quote Call: 630-629-9900
Waukesha Pump Positive 15
- Manufacturer: Waukesha
- Model Number: 15
- Frain Number: R29330
Waukesha, Model 15, positive displacement pump with 316 stainless steel contact parts. Rated from 1 to 10 gallons of product per minute – depending on materials, application and machine configuration. 200 psi maximum working pressure, temperature range of -40 Deg F to 200 deg f standard and up to 300 deg F with hot clearence rotors / stators and viton seals and capable operating both clockwise, or counter clockwise. Equipped with a 2" OD / 1½" ID Tri-clamp style product charge / discharge with 11" ground clearance. Powered by a 2 Hp drive with a variable speed controller and a 3:1 gear ratio for a maximum current rate of 7.5 gal/min. Mounted on a 45" long x 18" wide stainless steel push cart.
OAD: 45"L x 18"W x 44"H
Get a Free Quote Call: 630-629-9900
Waukesha Candy Chocolate Melter 30
- Manufacturer: Waukesha
- Model Number: 30
- Frain Number: 5H3722
Stainless steel, skid mounted chocolate melter and pump. Pounds of product per hour – depending on materails and application. Equipped with a 40" long x 45" wide x 12" deep melting chamber with a bottom 38" long x 10" wide paddle agitated trough and Waukesha model 30 positive displacement discharge pump. Low pressure jacket and self contained heating system with electric heater and recirculation pump. Temperature range of -40 Deg F to 200 deg f standard and up to 300 deg F with hot clearence rotors / stators and viton seals.
OAD: 51"L x 42"W x 30"H
Get a Free Quote Call: 630-629-9900